Metamorphosis and Millimeters
themetricmaven.com
themetricmaven.com
In everyday use using only the smaller unit implies a precision that usually isn't there.
Millimeters certainly has its place, but so do centimetres.
I don't think anybody had problems adjusting. It was just another thing to remember in class.
Outside the class everybody used mm/cm/m/km as needed (nobody used dm where I lived).
But I grew up with those units and didn't encounter them first in the university or high school. Just have everything be divisible by 10 is easy enough and knowing the prefixes is easy.
I was very confused and still am by inches, yards, stones, pounds, ounces, gallons. I don't know how many in each of each.
I don't know of anyone that has a problem using m, cm or mm in different circunstances
I remember one of the educational toys my school had, which I played with when I was 5 or 6. We called it "tens, hundreds, units" [1]. There were many 1×1×1cm "units", 10×1×1 "tens", 10×10×1 "hundreds" and a 10×10×10 "thousand". You could fill the hundreds and thousand with water, the thousand obviously being 1L.
The British National Curriculum [2] says children - In year 1 (age 5-6) should be able to count centimetres - In year 2, recognise place value, choose appropriate units (cm/m, g/kg, °C etc) and use measuring tools for these - In year 3, to add milli- to that, - In year 4, convert between centimetres and metres, and other units (time and £ and pence) - In year 5, to convert between milli-, centi-, base, and kilo- measures. Calculate square areas in cm² and m² - In year 6, volumes in m³ etc, and converting everything, to three decimal places.
(This hasn't changed since the 1960s or something, so it's a shame the country won't get rid of road signs with miles and yards on.)
[1] http://www.tts-group.co.uk/shops/tts/Products/PD1723354/Base...
[2] https://www.gov.uk/government/publications/national-curricul...
https://en.wikipedia.org/wiki/Cuisenaire_rods
They're brilliant, but go careful with some of the work books that are available. ("Blue + red = ?" cause confusion.)
I simply can not understand how one can be faster with a millimeter-only caliper than with one marked in centimeters and millimeters.
He is right that engineering does not use centimeters. But that's for clarity of communication, not for individual efficiency.
With regards to why America doesn't make the change to metric, I recall reading somewhere that the American manufacturing base didn't want to have to convert all their infrastructure, currently set up to manufacture screws, bolts, and other such tools in units of inches, half-inches, five-eighths inches and so forth. It's not just a question of cultural shifts in intuition -- there's a physical cost associated with making the change as well.
Knuth's quote comes to mind -- the root of all evil being premature optimization. I wonder about the full price when you integrate the little costs of these scenarios of suboptimal standards -- not just in the realm of physical measurement, but the QWERTY keyboard, pi vs. tao, English grammar rules, even the base ten number system among others. But at some point you have to declare "good enough", and stop refactoring to instead pay upkeep on the accumulated technical debt. Perhaps it is a shame that America chose not to refactor to metric, but maybe some day down the road we will find a generation generous enough to raise their children with better-optimized standards, and pay the costs of re-learning a new intuition themselves.
You can use units which are very neat and pretty logical for some things - and very inconvenient for others.
That's, I think, the reason we have all that variety of units, which don't quite follow the same system. Centimeters are there just because of utility in less than strict cases; may be brains are simplifying by dropping unnecessary precision digits from consideration. Same for Kelvin - we don't measure temperature in, say, electron-volts, not only because Volt isn't a natural unit.
Two remarks: firstly, the unit for temperature is kelvin. Secondly, and more importantly I don't see how temperature would be special. The second is a larger outlier. Whe have milliseconds, microseconds, etc, but rarely use kiloseconds, megaseconds. Another outlier is angles, where degrees, minutes, and seconds are used more often than radians. More examples at https://en.m.wikipedia.org/wiki/International_System_of_Unit...
I've only seen British drawings, which almost exclusively use mm for things up to the size of a moderate building (school etc). I've seen metres used on really big things, like 10km of railway.
(it looks like this architect doesn't really understand the concept of thumbnails)
I think architecture is using a separate set of rules than mechanics.
If we all switched to base 12 instead (especially if we likewise unified measurement for time, angles, geographic coordinates, money, etc.), the arithmetic would be much friendlier for humans.
One example of a base 12 metric system: http://www.dozenal.org/drupal/sites/default/files/tgm_0.pdf
I've just skimmed the PDF... it looks interesting but a bit cranky. I'll edit when I have a better idea. Table 9 is just... ridiculous to me.
Meanwhile, in most other areas of life, dividing into halves, thirds or quarters is overwhelmingly more common than dividing into tenths, hundredths or other powers of ten. If you wonder why the "unintuitive" imperial units have such staying power, consider that 12 and 16 are more typical bases for them, and 12 is essentially ideal (evenly divisible by 2, 3, 4 and 6) while 16 is better than 10 (evenly divisible by 2, 4 and 8).
Kitchen cupboards, appliances etc are designed in multiples of 300mm, which has factors of 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 25, 30, 50, 60, 75, 100, 150, 300. The smallest part is still in mm, not awkward fractions of an inch, and the whole wall can be put in mm: 3880mm. That's easy to understand, but 152 inches is less so (who uses inches for something that long?). 12ft 9in is presumably intuitive for those familiar with imperial, but annoying to convert as soon as it needs dividing or multiplying.
Also, imperial units didn't have much staying power in the ex-British Empire, apart from in Britain.
I think the main question is why we feel a need to impose a single one-size-fits-all universal unit set onto disparate domains with different ideas of what properties make a unit desirable. There are domains where base-10 units are a good fit, and other domains where base-12 units are a good fit, and I don't see why we need to try to force one set of units to serve both.
Here's one example: https://psnet.ahrq.gov/webmm/case/293
If the nurse had been used to working in kilograms, she would have realised 25kg was a huge sack of coal / much bigger child / whatever. (She would have known that her own weight as a child was 40kg or whatever.) Or, if the country had been properly metric, the scale wouldn't have had the option of pounds.
(Hopefully, you see no reason to divide a child into 3, 4 or 6 equally massed parts.)
You're really not doing a great job of presenting your case here.
Or perhaps because the SI are not thought since the kindergarten
and
"This shows that all bases have irregular wholenumber fractions; for example, the reciprocal of the base less one is always 0.1. However, it also shows that one base stands out in the regularity of the most common and important fractions (1/2, 1/3, 1/4, 1/6, 1/8): that is the base of twelve."
In general I think the “dozenal society” people need better numeral glyphs and better names for things. When reading their materials, try to look past the choices of names.
As for the advantage of base 12, try writing out multiplication and addition tables for both base 12 and base 10. Here are those multiplication tables using modular arithmetic:
multiplication table mod 12 multiplication table mod 10
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 1 2 3 4 5 6 -5 -4 -3 -2 -1 0 1 2 3 4 5 -4 -3 -2 -1
0 2 4 6 -4 -2 0 2 4 6 -4 -2 0 2 4 -4 -2 0 2 4 -4 -2
0 3 6 -3 0 3 6 -3 0 3 6 -3 0 3 -4 -1 2 5 -2 1 4 -3
0 4 -4 0 4 -4 0 4 -4 0 4 -4 0 4 -2 2 -4 0 4 -2 2 -4
0 5 -2 3 -4 1 6 -1 4 -3 2 -5 0 5 0 5 0 5 0 5 0 5
0 6 0 6 0 6 0 6 0 6 0 6 0 -4 2 -2 4 0 -4 2 -2 4
0 -5 2 -3 4 -1 6 1 -4 3 -2 5 0 -3 4 1 -2 5 2 -1 -4 3
0 -4 4 0 -4 4 0 -4 4 0 -4 4 0 -2 -4 4 2 0 -2 -4 4 2
0 -3 6 3 0 -3 6 3 0 -3 6 3 0 -1 -2 -3 -4 5 4 3 2 1
0 -2 -4 6 4 2 0 -2 -4 6 4 2
0 -1 -2 -3 -4 -5 6 5 4 3 2 1
Or try converting a list of common fractions to decimal / duodecimal notation.There's absolutely no way I can get most people I know to mix the alphabet and numerals. I'll definitely look more into it, but for the moment I doubt it's immense usefulness.
And honestly, I think the naming of units is very important. Numeral prefixes are important and I think the metric prefixes are quite easy to work with (maybe that's because I grew up with them). Gravyard is a bad choice I think!
Most people use a ruler or their hands to measure things, not dial calipers. And most people don't want to have to say "230 millimeters" as opposed to "23 centimeters" (or more realistically, 20 centimeters).
Also regarding your comment on mm vs cm, in my line of work (organ building [1]), we always talk in mm, just to prevent confusion, even for lengths of multiple meters).
That's of course very subjective. One has to remember that 1 foot is 12 inches, where in metrics one only remember once all prefixes and applies them to all units uniformly.
https://www.youtube.com/watch?v=JjBWJbHtYHo
I agree, though – the Google Video URL invalidation is a discrace. One would think that Google, who owns YouTube, should be able to create 301 redirects for all its own videos to their location on YouTube.
I agree about the second point, Google really has been too busy being socially fancy and letting their old resources rot stupidly. Noobs.