Using IEEE floating point to represent angle measures is horribly wasteful of bits, regardless of how you do it.
As an alternative, consider not storing angle measure at all, but instead using a stereographic projection (“half-angle tangent”) of the circle onto the whole line, and then using floating point numbers in the range (–∞, ∞] for your representation. https://en.wikipedia.org/wiki/Stereographic_projection
What you really want as a working format for rotations, ray directions, or points on a circle is to use a 2-dimensional square-grid (Cartesian coordinate) format like unit-magnitude “complex numbers”. The angle measure or stereographic projection is primarily useful as a compression format when you need to save bits transferring or storing data. Angle measures work okay for this, but can be annoying for requiring transcendental function evaluations to convert them to/from Cartesian coordinates, whereas to take the stereographic projection or its inverse only requires a single multiplicative inverse (i.e. division operation) plus some addition and multiplication per point.
To put it another way...it's about significant digits. A float has about 7 and a double about 15. It does not matter whether you use 0 to 360 or 0 to 3.6 million...the number of digits that are meaningful remain the same.
It's more of an issue when you're dealing with large sums composed of very tiny ones. If you add them together incorrectly the number becomes so large the tiny values stop mattering even if in aggregate they're important.
Like adding 1e-6 to itself a hundred million times gives you a result different than 1e-6 * 1e8. In the first case I get 999.999998191639 when the multiplied version is 1000.
These errors can accumulate to a dangerous degree if you don't do your operations in the right order.
Really, 52 bits of mantissa is more than enough for representing anything. You have to be wary of error building up on calculations, not of original representation errors (unless you are living on the edge; and I'd tell you: don't).
Useless answer: No, the precision is fixed for any magnitude. When you multiply your values, you will also multiply the interval, and there are as many useful numbers inside that new, larger, interval than were inside the old, smaller one.