Intel to Acquire eASIC: Lower Cost ASICs in FPGA Design Time
anandtech.com
anandtech.com
That's what really worries me - because if the acquisition were going into the group that builds Xeons, basically as an enabling technology for an internal team that makes sense. But being part of PSG means that they're going to try and sell this to customers (again).
For investors what you need to watch for is whether what they're really doing is buying growth. It's a classic move - buy small, similar companies and use get growth by upselling their product to your existing companies. But once all the customers have either bought or rejected you're back to brass tacks, the core business is missing growth/margin targets.
Also, some of their patents ,not related to this tech, dealt with 3d fpga, a much more efficient form of fpga.
I'm not entirely sure it's the same technology either but there doesn't seem to be much information on the matter.
http://eecatalog.com/chipdesign/2017/11/26/semiconductor-ip-...
Most are at 28nm-45nm with some at 55nm-65nm. The things they say they're concerned about also have some overlap with what eASIC's tech makes easier. That's on top of the number of companies that might be able to develop a FPGA but not full ASIC. eASIC's often a cheaper option for companies doing what's basically a bit faster and lower-power offering.
So, there's definitely potential here for Intel. I hope they realize a good chunk of it. Who knows if they will.
People don't have the expectation that general purpose designs will improve an break their specialized companies anymore.
The market for SoC is absolutely huge now, and it may be worth getting into it even if it's to get a small share.
There are very large clients now that may think it's worth designing chips for internal use.
Three years later we bought what was basically the same company but handled everything carefully and off the product went.
Could be as simple as they want to take a second swing at something that they thought wasn't worth it earlier....
What exactly is your suggestion at their market penetration? They can't manufacture more demand for CPUs out of thin air. The logical next step is exactly what they're doing - find complimentary products to sell into your existing installed base.
Connection between layers in a chip. Presumably they have everything in the chip standardized except one/a few layers, where vias are added to connect parts per customer specification.
If you don't need the ability to reconfigure the system any more, you can hardwire each of those 64 entries to the VDD and VSS rails instead. Its not nearly as efficient as the circuits you can get with a set of dedicated logic cells, but its much more efficient than the baseline FPGA fabric.
If the customer has already validated their logic on FPGA fabric, then its also much cheaper. You just ask these guys to "burn" it into an ASIC and you suddenly get a few hundred extra MHz.
Why are they called 'vias'? Because ASIC layout is somewhat similar to PCB layout - transistors go on one layer, and there are a dozen or so layers of routing wires below them, with vias in between the layers. So you can replace the transistors that would have been implementing SRAM cells for read/write LUTs with vias to power/ground layers instead.
Or Name me one thing good that Intel has ever done with their Acquisition.
There is something seriously wrong with Intel.