The Rostov-on-Don crash in 2016 appears to have been caused by downwards trimming for 12 seconds. This caused a -1g dive from which the pilots were unable to recover. It's inconceivable they wouldn't have been attempting to pull up with the elevator. You can't not notice -1g. https://en.wikipedia.org/wiki/Flydubai_Flight_981
Now the final report is not out yet, so it's not clear if the downwards trim was somehow manual (which doesn't really make any sense), or a similar problem to the Lion Air crash. Either way, it's worried Boeing and the FAA enough to issue this AD.
Basically conventional (not a canard) stable (not an F-16) aircraft have the CG in front of the center of lift of the main wing so it wants to nose down. The tail then acts as a counter balance, pushing down to keep the nose up. Because airspeed over the smaller surface effects its downforce and the center of thrust is not always in line with the center of drag, they add trim to prevent the pilot from having to maintain constant control pressure. Some do it by biasing the control surface itself, either in the control mechanism or with a tab that aerodynamically moves the surface, or by changing the angle of attack of the horizontal stabilizer.
See: https://www.quora.com/What-are-the-spinning-wheels-in-an-air...