https://www.apple.com/shop/product/MQ4H2AM/A/thunderbolt-3-u...
It does Thunderbolt 3, USB-C 3.1 Gen 2, and up to 100W of power delivery. It's a shame it's only available in one kinda-short length, but I think that's a technical limitation (any longer would require an active cable for Thunderbolt).
The big mistake IMO was a lack of obvious keying. Very little stops me from using that 2w-capacity keyboard cable to try to charge my laptop. If we're lucky, there's signaling at the device to tell me what's wrong, but if they had made a different plug on the 100W cable, it would eliminate a lot of cockpit errors.
Having one cable for everything is a huge red herring. If you need a keyboard and a power brick and an external hard drive, you need three cables. It doesn't matter if they're different, as long as the OEM isn't pulling some Apple-style "one single port is enough" BS.
No thank you. The drama around USB-C is insanely overblown; the vast majority of use cases are fine with the 60 watt + 480 mbps required minimum configuration for USB-C cables. In the few rare exceptions where you need >60 watts or higher speed, you're generally going to have purpose-built hardware anyway, so just devoting a special cable to that isn't such a big deal.
But on the other hand doubling the power wire thickness and leaving the signals wires untouched shouldn't add more than 10-20% to the price of the cable.
> The big mistake IMO was a lack of obvious keying. Very little stops me from using that 2w-capacity keyboard cable to try to charge my laptop. If we're lucky, there's signaling at the device to tell me what's wrong, but if they had made a different plug on the 100W cable, it would eliminate a lot of cockpit errors.
Every cable supports at least 60 watts. It's not a big deal if you use the wrong one to charge with.
That means a device can ignore the signalling entirely and just keep taking more power till the supply turns off, and then scale back 10 percent.
More and more Android phones do that, and it works very well.
Only disadvantage is if you plug it into a hub, it can cause the whole hub to go out for a bit. Devices solve that by not using the above algorithm when they detect any active signalling.