I'm aware that those batteries should not be deep-discharged, but you can just add more to compensate.
Lead is toxic but those batteries seem to be very recyclable.
Any comments?
I'm aware that those batteries should not be deep-discharged, but you can just add more to compensate.
Lead is toxic but those batteries seem to be very recyclable.
Any comments?
Cycle lifetime of lead is good as long as you don't deep-discharge it, but then if you don't deep-discharge it you need a lot more material.
Eventually the lead is going to degrade and then you need a battery changeout, or you need the wherewithal to refurbish the plates and the paste. No one goes to the trouble.
Lead-acid doesn't tolerate the cold as much as lithium does.
But the big enchirito is the fact that lithium batteries at 100% max capacity are great for cars. After they wear down to 75% max capacity they're no longer suitable (you want a pack with 20 miles' range?) and junk. At that point they're ideal for grid-tie because there's literally not much other use for them.
Lead acid requires purpose-building, which I believe would be cost-competitive, but also require a substantial raise for what many consider to be a has-been technology.
We punted and switched to a lithium iron phosphate battery. Because we could get away with a 2.5 amp-hr lion battery vs a 12 amp-hr lead acid. It's cheaper and we don't have to worry about a workman trying to lug 15-20lbs up a ladder.