One component of that task was running thousands of feet of CAT-6e cable. Of course you want to be sure your spool of CAT-6e cable has no wire breaks in it before you start using it[1] to wire up racks so there was a step that involved putting a connector on the stub of cable that was inside the reel, and a connector on the end of the cable that came off the reel, and then hooking up an instrument between them to measure the resistance/propagation/etc.
It is convenient to work at waist height for this, so our hapless technician had the cable spool put on a convenient big square brick like metal structure outside the building. He added the connectors, hooked up the tester, and the tester exploded. (well not completely but it did experience some rapid unplanned disassembly due to a large number of capacitors suddenly not existing.
The "brick like structure" that the technician was using as a table top happened to be one of the transformers that was converting high voltage down to 440V 3-phase for the data center. When he effectively shorted the cable loop with his tester he air coupled into the field around the transformer and put > 400V into the tester. Whoops!
[1] tracking down a bad network cable is not a lot of fun.