As already established by sibling comment to yours, 8.5 x 11 is very close to 4:3.
A4 is 297mm x 210mm which is very very close to √2.
Neither tsbinz nor sjwright was saying anything about whether 1/√2 is a "perfect size" or not.
The B* series is also 1/√2.
It is √2 for the ability to cut paper for mass manufacturing: the difference between the official A4 measurements and a "true" sqrt(2) is 16µm (assuming the short side is the reference).
Aka “very very” close. I didn’t feel the need to be so specific as defining the exact amount of closeness (despite knowing it), but thanks for sharing in case others were curious.
No. AKA the same. When the precision of the cutting implements is lower than the difference between the spec and the idealised ratio you're there. 296.9848mm is not an actual paper dimension which makes any sense.
A4 is not a worldwide standard (even excepting NA) either, many countries have different. I wasn’t saying US Letter is a universal standard either, quite the opposite.
My point to be very explicitly clear:
there is no universal size of paper around the globe, so saying something isn’t “paper sized” is entirely irrelevant to anyone besides those who share your definition of the size of paper
https://en.wikipedia.org/wiki/Paper_size#/media/File:Prevale...
> the A and B series of ISO 216, which includes the commonly used A4 size, are the international standard used by almost every country.
A and B series are specific size classes for specific use cases, that there are a number of sizes either historical or completely outside these use cases doesn't make them "not […] worldwide standards".