For me it's the same, but with one additional step.
Test the RAM in a known stable machine. If it passes an overnight memtest, then replace the flaky machine's PSU.
Test the RAM in a known stable machine. If it passes an overnight memtest, then replace the flaky machine's PSU.
I avoid XMP, however, and typically manually specify the voltage that is listed in the RAM's spec sheet and run at the speed that the CPU manufacturer recommends. (So the RAM might be sold as 3200 but Intel says 2400 is the max, so I run it at 2400.)
[1] https://www.anandtech.com/show/14525/amd-zen-2-microarchitec...
You need 3600MT to match that while keeping 1:1 sync, which means XMP unfortunately.