Later 386 and 486 systems implemented turbo logic in different ways. Some by reducing bus speed, some by disabling CPU caches, some by inserting wait states for memory access.
Turbo buttons were always a shaky proposition. They might have worked okay-ish with the original AT to slow the machine down into a somewhat fitting range to play older games, but probably quickly devolved into some show-offy marketing ploy ("look how fast it goes if I press this!").
Quite a project indeed, but possible with the right motherboard -- as an amusing side note, there is a very strange sub-sub-sub-genre of computer enthusiasts who enjoy the challenge of installing various Windows versions on the slowest possible systems that will run them:
https://www.winhistory.de/more/386/winq.htm
They've managed feats like running Windows XP on a 4 MHz Pentium Overdrive and Windows ME on a 3 MHz 486SL (that one takes 1 hour and 10 minutes to even boot)
It is a common misconception is that the MHz displays from this era had any kind of communication with the CPU or motherboard. They don't -- they are dumb devices that can switch between showing two arbitrary patterns on the LED display and are "programmed" by painstakingly setting jumpers on the back. Often when using 2-digit displays for computers with 3-digit clock speeds they would be programmed to display "HI" and "LO" instead of a number.
So when your display showed "20" that doesn't mean the CPU was running at 20 MHz. It might have been, because 386 CPUs always ran at the bus speed and 20 was a common 386 speed, but things get a lot more complicated when you move to the 486 platform with internal clock multipliers.
My 486 DX4/100 (33 MHz bus speed, 3x multiplier) has a turbo button that when disengaged lowers the effective speed of the system to something roughly like a 486 DX50. But this is not an exact science and does not in fact mean that the CPU is running at 50 MHz.
The biggest bang for the buck (for me) contracting job I ever did was to turn that bios setting on and press the button to make it run faster.