It's not dissimilar to how telescope mirrors are ground to perfection, and how to make a perfectly flat steel surface.
I am curious about the perfectly flat, right-angled interiors of the 50+-ton (always empty!) basalt boxes in Egyptian mausoleums. We have a plausible story about cutting the outsides using copper saw blades with gems embedded in the edge, but no similar one for the insides, particularly the inside corners.
We also need to understand why the tech for working the biggest rocks was lost before the Inka took up building. The late work always uses much smaller rocks, and is relatively crude.
Because they didn't use tools. I've watched telescope mirrors ground to incredible precision by hand, no tools.
> Or the lack of embedded shells.
Use rocks without embedded shells.
> inside corners
Use drills, clean up with files or blocking. Remember the Pharaohs had essentially infinite resources to do that for one box. He would have used the best masons, paid them well, and gave them the time they needed.
> why the tech for working the biggest rocks was lost
We can't know why, but the most plausible explanation is one that accounts for lost technology everywhere. People didn't have writing or didn't bother to write it down or lost the books.
> Because they didn't use tools. I've watched telescope mirrors ground to incredible precision by hand, no tools.
Good one. That doesn't work on non-convex polygonal shapes. Notably, the faces are not just identically curved, as one would get by interfering faces. They are both flat.
>> Or the lack of embedded shells.
> Use rocks without embedded shells.
The rock faces in the quarries have embedded shells. Only the cut faces of rocks from those quarries lack them.
>> inside corners
> Use drills, clean up with files or blocking. Remember the Pharaohs had essentially infinite resources to do that for one box. He would have used the best masons, paid them well, and gave them the time they needed.
Infinite labor doesn't help in a box. Only one or two masons would fit. We know what their rock drills were like; they had a minimum radius measured in inches. And, again, no tool marks.
You don't get to define out the unknown by inventing excuses to ignore it; that is the same as inventing aliens. It takes actual work.
http://precisiongranitecn.com/info/how-to-make-granite-surfa...
And then, there are the fused-rock glasses found on some monuments which defy explanation. Lightning? Perhaps, but then there's that corona eruption theory ..
Someone was melting rocks. Maybe with microwave resolutions.
Last time I checked it, it was concrete. Forms for blocks are made from animal skins. Cement was made in kiln. At least one kiln has pretty modern look.
1. Lots of people with lots of time on their hands did something that we'd be currently hard pressed to do but no one has really tried yet.
OR
2. Two aliens land on Earth and one of them says "Hey, how do we help out these poor savages to advance their civilization? I know, we'll teach them to build really cool walls from stone!"
...I know which one I'll pick. The wiki article doesn't offer any suspicions of extraterrestrial origin. In fact, a contemporary account suggests it's just hard work:
"to save themselves the expense, effort and delay with which the Indians worked the stone, they pulled down all the smooth masonry in the walls. There is indeed not a house in the city that has not been made of this stone, or at least the houses built by the Spaniards."
https://en.wikipedia.org/wiki/Sacsayhuam%C3%A1n
EDIT: Do you have a reference for the 0.005mm precision claim? Some of those walls look impressive but the pictures I'm looking at, definitely don't suggest such God-like precision: https://en.wikipedia.org/wiki/Sacsayhuam%C3%A1n#/media/File:...
https://en.wikipedia.org/wiki/Sacsayhuam%C3%A1n#/media/File:...
I mean, I never once mentioned two aliens in a UFO, but hey .. sure, why not.
And some modern techniques seems unreal [1]
[1] 1920s skyscrapers builders without safety ropes https://www.youtube.com/watch?v=gDN4c2wnx3E&t=55