How high of a COP would it take to make a heat pump a feasible way to make lower temperature waste heat a source? Or is this where the thermodynamics breaks down?
How high of a COP would it take to make a heat pump a feasible way to make lower temperature waste heat a source? Or is this where the thermodynamics breaks down?
There are a lot of other industrial processes though that don’t do any heat capturing.
Something left out though is that you might have lower capital costs but if you try tacking a power plant on somebody else’s factory, they’re going to want a cut.
Efficiency is dictated by temperature differences, you get a bigger cut for less investment when the temperature difference between heat source and environment is largest.
Yeah, there's no free lunch. You could use the low-temperature waste heat to pre-heat the working fluid for a combustion-based system, but using a heat pump to increase the temperature will cancel out the efficiency gain from having a higher temperature for the heat engine.
Harvesting an industrial plant's own waste heat isn't going to power the industrial plant, and thus, you still make them rely on burning some other fuel that would otherwise not have to be burned.
There may just be no other reasonable way to recover energy from some processes, and in that case building a heat recovery power plant is probably a good idea.
Also: Geothermal is not free, only the fuel is free. The cost of every electron has to account for the cost of building the plant.
As such, in some sense, with geothermal energy there is no notion of "wasted" power as far as the environment goes. Even if you leave your heaters on unnecessarily, you're just letting the same heat out from your living room instead of letting the same amount of heat escape directly from a fumarole. The heat will have been released either way, and whether you leave your heater on or not only changes where the heat gets released from.
Whereas if you were using, say, nuclear power, leaving your heaters on means that you are wasting nuclear fuel and generating heat that wouldn't have been released had you turned your heaters off.
Not to imply that "just heat energy" is useless -- https://en.wikipedia.org/wiki/District_heating is the term for using waste industrial heat to heat up homes in the surrounding areas. More common in Europe and Canada than the US I believe.
Cogeneration is when the concept is used specifically by electricity plants. It's used mostly in places that have need to generate their own electricity and heating like college and hospital campuses -- by harvesting the waste heat for another localized purpose, it becomes cheaper than relying solely on the grid.
Something like district heating has much higher infrastructure and coordination costs, but compared to an electricity conversion of only 20%, it's interesting to think about how other applications could have potentially higher efficiencies from that same waste stream.
Anyone know if there are examples of industrial parks that have been designed with waste stream "stacking" in mind? Instead of converting exhaust to electricity at 20% efficiency, could that power production waste heat be sent to something like a kiln or a chemical producer that needs heat as input?
The best use of heat is as heat, without converting it. The problem is that heat doesn't travel very well, 5-8 km is really the practical limit before insulation costs swamp revenues. And a lot of industrial heat is too far away from a viable user of that heat. If the facility can use the heat internally their process engineers have already incorporated that (through pinch analysis etc).
We have one project now where we're replacing a heat exchanger that is supplying process heat from the exhaust with a power plant, but then using the waste heat from the power plant (still 80% of it left!) to replace the process heat. Overall efficiency will be around 60%.
There are so many things you could run off of even 200F, like drying systems or counterflow heat exchangers. It may be that materials and handling limitations as you go up in temps outweighs the effort to extract.
Would be more economical if fuel or emissions were more expensive.