Amiga 3000T Review (1992)
nl.aminet.net
nl.aminet.net
It's such a shame that it couldn't have been a product offered by a sane company :(
The Enhanced Chipset (ECS) was just a minor improvement over the 16-bit DMA design of the original chipset (OCS). Due to the slow memory access, high-resolution VGA modes could use only 4 bitplanes (16 colors) and left very little free bandwidth for actual rendering, resulting in an unusably slow desktop experience.
Zorro III accelerated video cards appeared only later, with outdated PC graphics processors (Matrox, Cirrus...) and brittle OS integration (CyberGraphX, Picasso...). Audio was unchanged from the Amiga 1000 era: 8bit PCM with only 4 channels.
I was a very loyal Amiga user, but the Amiga 3000 is about the time when we started losing our technical edge over PCs. AGA machines arrived too late and were still designed around planar graphics... a fatal mistake.
The two highest resolution VGA modes are 640×480 in 16-color and monochrome; the only VGA mode with more than 16 colors is 320×200 256-color.
High-resolution modes with more than 16 colors are beyond VGA.
But they cancelled it despite finished, because they deemed it "too expensive".
Commodore's mismanagement and cluelessness ran deep.
The "Productivity" modes (equivalent to hires+interlace, without the interlace, double line clock instead, are extremely useful, even if you don't have FAST and are thus limited to 2 color for performance.
Interlacing is easy, deinterlacing not so much. The scan doubler was a very welcome addition, and it worked much better with non-interlaced modes. Obviously, productivity modes were pass-through.
>Maybe they were more useful on other machines
Big box A3000 was not as common as the other machines with ECS.
These would be A500+ and A600, alongside A500 with upgraded Denise (upgrade kits were sold alongside AmigaOS 2.x disks/roms).
>I personally never knew anyone with a monitor that could use them.
DVD era, many TVs supported "progressive" mode. Before that, it was not exactly common, but some Multisync VGA monitors could take both the 15.6KHz and 31KHz modes.
thankfully, there was the $600 atari 520st that you could plug into the tv if you had to.
amigas always seemed like they were mismatched to the market. obscenely expensive for hobbyist or kids' machines, but not really suitable to the business/prosumer market. (except for the video toaster, i guess, which seemed to be the niche they ultimately filled- other than overpriced home computers with limited software options)
i wish i could remember what it was. i want to say high peripheral costs- or it was missing something big... but i can't remember now.
was it that the os was designed for more powerful machines and there wasn't much space left for user programs maybe?
I think it was fairly common to use TV output on the Amiga 500, since it was much more affordable than buying a proper computer monitor. You’re not going to do much GUI productivity multitasking on a PAL TV because of interlacing, but it worked fine for games and low-res text mode.
So really the Amiga 500 was directly for the Commodore 64 market, while the 2000/3000 were more like oddball low-end workstations — and didn’t have a clear market.
As long as you had a good PAL TV, such as a Sony Trinitron with SCART (RGB) input, it was VERY feasible.
On a composite-only TV, for actual work, you'd be better off with the Mono "composite without color" output A500 had than the horror which is actual composite.
720x256 (overscan and no interlace) & virtual desktops (screens) enabled effective multitasking.
720x512 (interlaced) was of course better, but with great care taken on selecting screen colors to minimize interlaced-related annoyance.
This is true even with an A500 with 512KB CHIP + 512KB SLOW RAM and single floppy drive, on AmigaOS 1.3.
I know for a fact, because A500+A501+Trinitron was my setup for several years.
I had this combo as well. Not as crisp as a 1084S but still quite decent
Some 30 years after manufacture, it's now sitting under my desk and still bootable. It's got Amiga UNIX installed, and an MNT ZZ9000 (https://shop.mntmn.com/products/zz9000-for-amiga-preorder) in the video slot. I've got a partially written Amiga UNIX driver for the card, currently blocked on me reverse engineering MMU setup enough to be able to map the card's video RAM into userland - Amiga UNIX doesn't support Zorro 3, and Zorro 2 only supports 24-bit addressing so there's no way to expose enough video RAM to drive my UWQHD monitor at native resolution otherwise. It's the first computer I ever accessed the web on, and I hope to keep it running utterly ridiculous code for as long as possible.