New Raspberry Pi: Compute Module 4S
jeffgeerling.com
jeffgeerling.com
That said, I can understand why they went back to the old form factor. The new high-density connectors required for CM4 integration are a single-source item, don't have any alternatives [1], and are out of stock everywhere [2]. On the other hand, the older SO-DIMM connectors are a commodity item that can be sourced from a number of manufacturers.
The SO-DIMM connectors are also much more convenient and robust for removing and re-attaching the CM. Raspberry Pi makes it relatively hard to flash the eMMC on the CM in-system if you include any USB periphery on-board. Because of this a production process will generally include the CM being placed at least once onto a dedicated flashing board before being placed onto the final device.
[1] https://forums.raspberrypi.com/viewtopic.php?t=325885&sid=71...
[2] https://octopart.com/search?q=DF40C-100DS-0.4V%2851%29&curre...
https://www.hirose.com/ja/product/document?clcode=CL0684-404...
The recommendation against using multiple connectors on a single board seems to be largely ignored in the wild though. I've seen similar products that use two or even three DF40-series connectors on the same PCB. Here's one example from the top of my head:
https://www.variscite.com/product/system-on-module-som/corte...
Or perhaps the trouble is with other people trying to design compatible boards and just not getting the placement exactly right compared to how the RPi board house has it set up.