The Mechanical Battery
damninteresting.com
damninteresting.com
Christopher S. Putnam said ”unique to flywheel designs is the gyroscopic effect, which causes spinning objects to resist changes to their orientation.
As stated a flywheel resists change in its angular location. In playing with various test apparatuses during the 1970,s & 1980’s, we strove to design and build a “floating” cradle to contain the flywheel. This cradle would in theory keep the flywheel facing in the same direction no matter how the vehicle moved and/or turned. Theory does not always pan out in the real world.
Christopher S. Putnam said ”all of which must be released very quickly if the flywheel breaks apart or falls off its axle.”
We did sufferer various breakdowns, as the flywheel’s mounts would shatter under the extreme forces that such a device operates under. Also we had a casualty when one test apparatus had a minor flaw in structure of that flywheel.
We had powered-up the flywheel and was preparing to test yet another combination of bearings, magnets, and high tensile frame structure. It was giving off a most pleasant thrum and there was hardly any deviation in the floating axis. Suddenly there was a weird sounding pop, and the warning systems came on-line. This shut down the power to the flywheel and engaged the slow-brake to power down the spin. Unfortunately this was too little and too late. The floating axis shifted and sent harmonic vibrations throughout the support structure. With an ear-piercing squeal the highly spinning metal gave off its death cry. The device literally came apart sending shrapnel in a vector perpendicular to the common axis of the flywheel. The safety shield that incased the device did not live up to its design as the debris tore through it like so much tissue paper. Unfortunately there was a fellow standing in front of it when this happened. Like a scene out of some sick horror flick, he was instantly split from crotch to forehead. Considering the amount of damage, it was amazing that we suffered only the one death.
The project was canceled shortly after that.
…as interesting as this article is, I wish that I had not read the damn thing. It brought back bad memories. Memories that are just as vivid as if it just happened. I was standing next to him, and as he fell I tried to catch him…
A flywheel-based battery, on the other hand, can reach energy densities 3-4 times higher, at around 100-130 watt-hours per kilogram.
The problem is that the author compares fly-wheels to lead-acid batteries. Lithium-ion batteries can easily achieve 150-200Wh/kg beating flywheels. Plus, there are huge advances being made in chemical batteries such as those made by A123 Systems.A123 batteries are not notably high in specific-energy capacity. They are notably low in internal resistance. Big difference.
Li-Ion in vehicles usually involves redundancy so as to minimize the discharge-damage to the cells. The Tesla Roadster batteries weigh about 400 kg and are rated to hold about 50kWh = 125 Wh/kg.
http://www.teslamotorsclub.com/technical-discussion/354-tesl...
Since storing electricity is a problem at sea, and most yachts carry a truckload of batteries maybe there is a business opportunity for some flywheel-hacker...
All we need is a second flywheel battery to power the first one...
In general, the dual-mass oppositely rotating flywheels work best: there's a miniature system like this in every car to even out engine vibrations.
Space isn't at a premium in cars, and on motorscooters and motorcycles they just use a high rpm engine (10000 rpm in typical operation) to have smoother torque output.
But I'm skeptical. Anything with moving parts has failure modes. Huge stationary flywheels as building or municipal storage devices make a lot more sense to me than putting one in a car.
I remember calculating that the outer regions of a CD spin at almost the speed of sound in a modern CD drive. (But do not take my word for it - until I do the calculation again, it's been some time.)
This makes me wonder: with all the excitement about graphene, what rpms would a flywheel made from shells of graphene be able to achieve?
(This was a solved exercise, ans: about 20 MJ)
Is this why you do not fall from a bike when it is moving forward?
This article is worth reading; it's an investigation into bicycle stability.
http://ist-socrates.berkeley.edu/~fajans/Teaching/MoreBikeFi...
"It seems a lot of tortuous effort to produce in the end a machine of absolutely no utility whatsoever, but that sets me firmly in the mainstream of modern technology."