To be spec-conform, you need at least 1 IC. You can theoretically hack a solution together with some resistors, but it's not spec conform. If you need the high-speed lanes, add a mux/redriver to un-flip it.
If you want power delivery (>15W), you need a PD controller and port protection (or a user will fry your data lines when they unplug the connector and put 20V on the data pins). 2 ICs right there, and one of them is basically a microcontroller, so you need to deal with more programming.
If you want alternate mode, you need to implement the entire PD stack and a redriver/mux. That's 2-3 ICs right there that have to work together (so usually a single vendor). And not all of them support alt mode.
Which, ok, fine. I'm not building a cost optimized product, I just want it to work well. Except literally none of the ICs are available. Because USB-C requires ICs for everything, it's all sold out (or total garbage that's not worth designing into a product, or requires vendor support to design the firmware, or or or).