The person posted pictures of the original paste job from the factory. The amount of paste is not unreasonable, and what was instead evident was that the paste had dried out, which, again, is normal.
That didn't stop people from overreacting and declaring a corporation (one famous for obsessively controlling its production chain) to be idiots. It did not have "10x the thermal paste needed."
GamersNexus has solidly disproven the "too much paste causes overheating" myth. Excess paste just squirts out the sides, which is not a problem unless it is conductive: https://www.youtube.com/watch?v=EUWVVTY63hc
What caused people to really lose their minds was a screengrab that was claimed (with no evidence whatsoever) to be from the repair manual showing wildly inappropriate levels of thermal paste being applied. The screenshot was never confirmed and given the source - again, SomethingAwful - it was almost certainly not the repair manual or factory instructions (the factory instructions wouldn't be in English, for starters...)
https://www.techpowerup.com/11403/overheating-macbook-pro-my...
Seems Pepperidge Farm's memory isn't as good as you thought, or you're pushing some sort of agenda.
I've seen way too much thermal paste on Mac laptop boards.
Not just Apple; for a while I think 2007-2010, I was seeing a number of very inexpensive desktop computers with cooked thermal compound on AMD CPUs.
These observations aren't worth much, but it doesn't surprise me if a new Mac has thermal issues in the field. Although my M1 MacBook Air is the best, coolest-running machine I have ever had.
The claim was for the service manual, not repair manual:
http://forums.macnn.com/showthread.php?t=295925
Apple used to produce detailed service manuals in English:
https://www.applerepairmanuals.com/the_manuals_are_in_here/i...
More on the overheating issue:
https://paulstamatiou.com/macbook-too-hot-to-handle-literall...
> Remember that time about 15 years ago when MacBook Pros were all overheating and the root cause was Apple was adding 10x the amount of thermal paste needed at the factory?
Many people saw the images from the repair (oh, I'm sorry, service) manuals and directly claimed that was how systems were being prepared in the factory.
> Apple used to produce detailed service manuals in English:
I'm aware of that. The factory does not use repair (or "service") manuals, and they would not be written in English.
> More on the overheating issue
That post does not show a Macbook Pro, does not show over-application of thermal paste from the factory, and does not contain any evidence of impacted thermals.
Further, it claims: "anything more is overkill and can hinder the cooling properties of the heatsink."
Read this slowly: over-application of non-electrically-conducting thermal paste is not harmful. The heatsink clamp force is designed with the viscosity of the thermal paste in mind to generate the desired film thickness. It will just ooze out the sides.
Someone who over-applies thermal paste, or uses thermal paste that is too viscous, might need to wait some period of time for the excess paste to migrate out. Until it does, thermals might be impacted a bit. It is well known in the OC'ing PC community that you need to wait a day or two for thermal readings to be meaningful.
https://gizmodo.com/thermal-greasy-apple-sics-lawyers-on-som...
"After a Something Awful denizen took apart his MacBook Pro and discovered that Apple had slathered on far too much thermal grease, he found that using a more modest amount dropped his MacBook Pro's temperatures by several degrees. Now the forum has recieved a threatening letter from Apple's legal staff, requesting a link to this image [pictured above] be removed because 'The Service Source manual for the MacBook Pro is Apple's intellectual property and is protected by U.S. copyright law.'"
Like many others [1,2,3,4,5], I saw a lot of these MacBook Pro overheating issues resolved by removing the profusion of thermal paste and replacing it with a sane amount of Arctic Silver.
[1] https://www.teamfortress.tv/8399/macbook-pros-and-overheatin... "But what really fixed everything, was replacing the factory thermal paste with my own application of Arctic mx-4. My core temps are now 15-20 degrees celsius cooler. No joke [TL;DR]Apple did a really bad job of applying the thermal paste on my 2011 Macbook Pro. So bad that the excess of paste around the diodes were causing overheating. I cleaned up their shitty job and put on Arctic Mx-4 and now my fps is higher than it ever was. Here are pictures of what I found. This is embarrassing because it makes Apple look pretty bad."
[2] https://old.reddit.com/r/apple/comments/2xfzzi/if_you_havent... "I own a Late 2008 Macbook unibody, and lately the temps of the macbook were insane, until today. I was reading up on how Apple applies way to much thermal paste from the factory and boy were they right. I got around to opening the case and pulled the logic board earlier today. Looked at the thermal paste and it just seemed like they put it there. No real care for it working or not. Here: http://imgur.com/9z0cZwU Anyways, I cleaned up the thermal paste, and reapplied Arctic Silver 5. It made a huge difference! Temp at Idle before were roughly 55-60 degrees celsius. Temp at Idle after are at 40 degrees celsius."
[3] https://forums.macrumors.com/threads/its-official-macbooks-h... "It's official: Macbooks have bad thermal paste applied"
[4] https://www.pistonheads.com/gassing/topic.asp?h=0&f=95&t=496... "Early Macbook Pro - Overheating, too much thermal paste!"
[5] https://free-info-pages.com/my2011macbookpro/replacing-therm... "Why reapply thermal paste? Too much paste reduces the rate at which the CPU transfers heat to the heatsink. Subsequently, temperatures (both idle and load) increase. You can see the gobs that were used on my 15″ MacBook Pro here, on both the i7 2.2 Ghz CPU and the AMD 6750m GPU, as well as the heatsink"
Are you sure you’re not getting them confused?
8600M had a design defect, bad composition of glue securing microbumps connecting die to package. Thermal cycling in high stress scenarios softened improperly selected underfill and broke microbumps connecting die to package. Repeated heating up can again soften the compound to release stresses and temporarily reconnect broken traces. It never fixes the main issue of broken chip.
https://en-academic.com/dic.nsf/enwiki/2011837#Problems
https://semiaccurate.com/2009/08/21/nvidia-finally-understan...
>On July 2, 2009, the date being ironically a year after the notorious 8-K that publicly kicked off bumpgate, the company put up a job listing for a “DIRECTOR OF PACKAGE TECHNOLOGY”.
https://notebooks.com/2008/10/10/apple-to-replace-faulty-nvi...
2010 saw 820-2850 with N8 (330uF) Tantalum caps frying under the GPU. For 2011 Apple "wisely" switched to AMD and we got 820-2915 with fried AMD GPUs :) Apple is simply BAD at cooling.