Desalination by reverse osmosis requires certain force to push water through the filters which is dictated by osmotic pressure. It is unavoidable.
To imagine it, think about it this way: to overcome osmotic pressure you only need to pump the water above the filter to a certain height. The height you need is only dictated by the magnitude of the pressure and not the filter. And as the water flows, you only need to top up the water column which is your only energy expenditure. The only thing that the filter dictates is how quickly the water will flow -- which is how much filter area you need to filter a certain amount of water in a unit of time. But pumping the water to certain height requires always exactly the same amount of energy regardless of the properties of the filter.
For sea water the pressure is 25-33 bar (at 25C) which translates to column of water 250-330 m high.
In practice building a column 1/3km in height would not be practical so you can start imagining other configurations. For example, you could come up with a piston that is pushed by a spring to maintain roughly constant pressure and you inject water from time to time to maintain piston position.
But you will always be working against this pressure you have to overcome for the sea water to start getting separated from salt in one go, or you could use multiple stages to reduce pressures at the cost of more complex processing. Whatever you do there is minimum cost in energy you have to expend that does not depend on the filter.
But there is still a possibility for cheaper/lower maintenance filters and so studying materials that can pass water and stop everything else can still provide a lot of value.