Utopia: USB power sockets on every wall
extremetech.com
extremetech.com
Someone is not thinking this through all the way. Even at 90% efficiency you are wasting 33 watts of energy at max, and that is a LOT of heat to generate behind a wall with no ventilation.
Not to mention the power supply is not going to fit in a standard box. Or that good (read: Efficient) DC power supplies are quite expensive.
And you won't be making central power supplies in the basement either. 300 watts at 12 volts is 25 amps! You would need pretty thick cables to do that. At 5 volts it's 60 amps - that would be a wire as thick as what an electrical dryer uses.
He can have as many dreamy smiles as he wants, but this is not going to happen.
Then we could step that down in the sockets, to 12 and 5V.
We could also use USB cables that have transformers built in, I guess -- bulges in the cable, or something. But then you're moving away from the 'one cable for everything' idea.
You could have a DC distribution panel next to the main one, that converts the mains voltage to 24/48 VDC for lighting circuits and DC receptacles. 240 Watts (10 or 5 Amps) could be enough to power a lot of devices on a branch, while still allowing the wires to be reasonable (14 AWG or smaller).
I think the bigger win would be for LED lighting circuits, but device chargers could use it too.
There's no way a USB plug will replace existing power outlets. A 15A line in the US can handle over 1400 W, which is more than the 100W mentioned here or the hypothetical 300W in the future. An induction cooktop draws around 2000W and an electric oven around 7500W.
Plus, a number of devices depend on AC power to drive a induction motor, so there's a huge installed base that can't cheaply be replaced with DC power even there's enough raw power available.
I think my ICS Transformer Prime only provides "media device" and "digital camera" as modes, though.
If you wanted to be a dick, I think replacing the insides of a USB stick with a large charged capacitor and leaving them in parking lots would be the way to go.
In the end I retro fitting a hub to the wall that connected to my system which is hidden in the wall ,with the cables running under the wooden flooring.
2. A 5V television? Not likely. This will lead to more types of sockets. Which is the opposite of what we want.
(* yes I know that the usb symbol should always face up, but that's often misused)
If you have many USB ports, could you wire something up to run a television from multiple USB 5V ports or is there a voltage/amp issue of some kind in the way?
Suppose you have a 300 watt plasma TV - that's 60 amps at 5 volts. That's the kind of wire electric dryers and ovens use. You could take that wire and divide it into many small ones, but you would still have that much wire which would not be practical.
However, an individual connector may be rated to 100 watts, but the controller may not be able to deliver 100 watts to each of the ports it is connected to. You might have to span the TV across several different hubs.
Yes, a given psu could transform the voltage back up with switchmode, but then you've got the horrible transformation inefficiency twice! I wonder how many devices there are out there that actually want that much current at 5V.
I've worn out the connectors on several game consoles. :-)
It just makes me sad to think about how much effort, materials, knowledge and time has humankind wasted in working against each other.
And, just to avoid trolling, I have to say that I am not criticizing capitalism per se, but just this one side of it.
There must be a better way!
Now please, go to your cellar and tell me for what kind of experiment are those 40+ different chargers that you have for all your devices, which most of them have exactly the same power requirements.
I would say that, in most cases, those chargers were developed in order to take that extra 1 EUR profit.
And that, *ing the customer, which somehow has been taking this mess for over 20 years.
Right now I can charge almost all my mobile devices (a phone, an mp3 player, a kindle and the batteries for my camera) with a single charger I picked up in a regular department store for ~15EUR (first set of rechargeable batteries included) and two standard usb cables which came with those devices and can also be used to transfer data. More, the charger is largely optional, I could just plug them into into my computer -- often connecting to put podcasts on is enough to charge the mp3 player.
Only my laptop really requires a separate, dedicated power supply. The 40+ different chargers are just remnants of my electronic history because the current generation of mobile devices didn't even come with the chargers (except for the htc phone, but it's a standard usb charger, I could use it with cables and devices other than the phone).
The experimentation phase is largely over and makers are converging. Sure, there will always be someone who diverges but it's the cost of progress (even if progress in this context means a prettier hole in your phone).
http://boingboing.net/2009/02/15/european-commission.html
Without that interference in the invisible hand of the market, your cellar would be full with other 40+ chargers. All in name of 1€ profit.
Sure, it is in the interest of the manufacturers to use standardized components ... unless the customer can be fooled to take pain with minimum marketing effort. No manufacturer is going to sit down and put in their priority list the item "how to reduce the junk electronics in the basement of my customers". They must be forced to it, and if the customer is not able to unite, the voter must interfere - as is slowly happening.
At most my cellar would contain one additional charger for the phone. Other devices didn't come with a charger at all (some aren't even covered by the directive or were made well before its announcement). I guess in the name of 3€ of cut cost which coincidentally also reduces the number of junk electronics in my basement.
(See http://www.nytimes.com/2012/02/11/technology/electronic-secu...)
The problem is if there is a failure the high voltage might be applied to the low voltage wires which are not insulated to handle that. And neither is the user who might be touching the wire that he thinks is low voltage.
I believe the concern some people have with such an arrangement is wires carrying the higher power AC inducing unwanted currents in those carrying the lower power DC. How likely this actually is to be an issue I'm not sure.