Anyway, super easy to try on linux servers.
First double check your existing setting
sysctl -a | grep tcp_slow_start_after_idle
then sysctl -w net.ipv4.tcp_slow_start_after_idle=0
if you want to enhance to IW10 then first check the last line of ip route show
should be something like default via 1.2.3.4 dev eth0
then copy it to the middle of this ip route change default via 1.2.3.4 dev eth0 initcwnd 10
if you are using a VERY current linux kernel, you can also add initrwnd like so: ip route change default via 1.2.3.4 dev eth0 initcwnd 10 initrwnd 10
Note the ip route change is not permanent unless you add it to something like /etc/rc.localYou should be able to see the change before/after in wireshark if you look very very carefully at the milliseconds before the first real ack.