Pick up a pile of aluminum oxide from a depot, electrolyze it into aluminum at home, and drop off the finished aluminum at the depot for a cheque that covers your electricity.
"The theoretical minimum energy requirement for this process is 6.23 kWh/(kg of Al), but the process commonly requires 15.37 kWh."
https://en.wikipedia.org/wiki/Hall%E2%80%93H%C3%A9roult_proc...
That's quite a few kWh of heat per kg of finished product. You're going from Al2O3 to Al, so your returns will weigh less than your pickups.
Comparable to coal or oil heat:
"With a complete combustion or fission , approx. 8 kWh of heat can be generated from 1 kg of coal, approx. 12 kWh from 1 kg of mineral oil"
It might make sense at industrial scale while pumping waste heat to nearby office buildings or something. But even slightly higher electricity costs would be a huge issue.
An aluminium smelting at home heating solution would have a maximum CoP of 2 (as you're reducing the energy usage of the smelter by the same amount). A heat pump could easily have a CoP of 3 or 4.
The use of electricity as an input is inescapable for this process, so may as well use the waste heat as directly as possible.
Thus various schemes for combined heat and power etc which take the valueless waste heat and use it for some other purposes like warming homes or greenhouses etc. So while the COP would be 0.5 the electricity would be subsidized by the smelling process. https://en.wikipedia.org/wiki/Cogeneration
Where such schemes fail is generally economies of scale.