Former MakerBot exec launches Solidoodle sub-$500 3D printer
engadget.com
engadget.com
Honestly we don't need cheaper open source 3d printers, we need a more reliable, better one. Show me printing something from a computer without manual intervention, and I'll buy it.
Yeah, it seems the primary focus on 3d printing is lowering the cost. But trust me - there are plenty of people working on other innovations, such as multi material and rubber printing (both are available on high end models).
I'd much rather pay $500 for a slightly finicky device than $1000 for an equally finicky device (MakerBot), and for me, more than $1000 is too much to spend on a 3D printer.
Ezra (of Ruby/Rails fame) announced his new company at RailsConf today, called TrinityLabs.
The website is still a bit sparse, but he's launching a new company for the 3D printer scene with machines around 1k that can make large, high resolution objections, with dual ink heads and a type of plastic that dissolves in water (making for easily removed support structures).
The website is http://trinitylabs.com/
He's got a JS-based 3D modeler with plans for an upcoming open source repository of models and lots of other cool stuff. I'm very excited to see what he comes up with.
I've bookmarked the site and look forward to seeing them go live!
I sincerely hope nobody buys the $499 version because it is just impossible to print without a heated platform. The plastic slides around everywhere. Spend the extra $100 for the heated platform + case.
I really want to get one of these so I can print more than 1 thing at a time 0_o
Seems like it will be very similar to the Makerbot Replicator ($1,750), but with less support (both of the software + hardware).
For example, my build platform was slightly warped (probably the case for 50% of buyers), and upon emailing support they promptly put me on a list for a new (gratis) platform to be shipped out next week. Not sure if this will be the case for Solidoodle- my guess is no.
My recommendation - wait for a printer that can clear its own build platform. It takes 1-10 hours to print out an object, even with 1% infill. Just heating the machine takes 10-15 minutes from room temp.
I built an enclosure for my replicator and it has helped tremendously - both in keeping the cats out and in keeping the heat in.
I have a computer set up with a webcam so I can watch/start the printer from afar- but without a self-clearing mechanism, it's impossible to administer from afar and very difficult to print out many items one after the other (platform cools much faster than it heats, so if you are able to start the next print right away it would significantly reduce print time).
Also, something should be done about the build platform - it warps easily and loses its stickiness (requiring you to replace the klapton tape every 20-30 prints).
If you've got some free time and an eagerness for tinkering, go for it. Don't expect it to print effortlessly, without intervention, or in fine detail.
If solidoodle is indeed open source, I'll probably eventually buy one.
If your argument is that lowering margins is a move that will slow the pace of innovation (i.e. that R+D money drives innovation in this space), won't the additional capital Makerbot have generated off of their presumably larger margins allow them to compete favorably in introducing superior models?
A lot of innovation in this market is open-source and performed at no cost (i.e. the many RepRap community designs). I don't think this is something like "founder runs off with proprietary technology, undercuts product by stealing results of sunken R+D cost." I think it's just building a similar product at a lower price point, and hoping to drive volume. I'm really struggling to see anything wrong with that. I'd certainly love to have more people in the 3D printing community, especially because many seem to give back with new, open designs leading to better products.
Pretty sure there was no mention of 'stifling innovation'. I think you misinterpreted. I believe he's trying to say that these guys are doing the exact same thing as MakerBot (ie not innovating or building something new), but selling at a lower price. Very different than 'stifling innovation'.
It has 0.3 mm precision. But later it is also mentioned you can print 0.1 mm layers for higher precision?
http://store.solidoodle.com/index.php?route=product/product&...
It uses a roll of filament, in addition to a computer and power.
http://store.solidoodle.com/index.php?route=product/category...
http://store.solidoodle.com/index.php?route=product/category...
That would be an amazing achievement. So it prints stuff from nothing? Or rather, they convert energy into matter?