You need both to prevent fire and accidental shock. Fortunately, you can install both at the same time for all of your receptacles by using GFCI+AFCI circuit breakers. Unfortunately, they are expensive.
All true, and also: GFCI breakers will not substitute for the dual breakers used in many panel boxes, they are too big. And, use of GFCI breakers is not compatible with three-wire circuits used in many locales in the US, at least. (What I mean is, two hot wires of opposite polarity sharing a common grounded conductor, allowing to run two circuits over three wires.)
Surprisingly difficult to find an arc interrupter in the UK. I found a link [0] which might shed some light on that; essentially the characteristics/problems of a 240v grounded system are different to a 110v, predominantly 2-pin system.