Newer youtubes are "opus (251)", which I think is 128kbps 48KHz Opus (WebM standard).
- Spotify at least used to be ogg vorbis and claims to be "320kbit/s [mp3] equivalent"
I think the 128kps Opus is still considered quite lossy¹ and 320kpbit/s mp3s I know I can hear the difference to wav on some tracks in a blind test, but generally don't find them better or worse.
¹ from some google test:
I’ll not rewrite details here, one can search my comment history if more details are required.
This means, to be able to get a good sound from any system, you have to feed it a good signal, and that path starts with recording.
Current audio codecs are great from a psychoacoustic point of view. A good encoder can create an enjoyable file at modest bitrates (192kbps for MP3, and 128kbps for AAC IIRC), and retain most of the details.
The audible residue when you subtract a MP3 from a FLAC is not details per se, but instrument separation and perceived size of the sound stage. People generally call this snake oil, but I have the same amplifier for the last 30 years, and I can say how different qualities of audio render through the same pipeline. A good recording stored losslessly can bring the concert to your home, up to a point. MP3 re-encodings of the same record will sound flatter and smaller.
Lastly, it's not possible to completely contain the sound of a symphony orchestra in a stereo recording. That's not happening. So there's always a limit.
If you have the time, there's a nice ABX test: http://abx.digitalfeed.net/
Thank god we have more than 2 ears.
A symphony orchestra is miced per group normally (2 for violins, 2 for trumpets, etc.), but if you're around 60 people, you can mic every instrument individually.
To reproduce the sound 1 to 1, you need to mic every instrument individually, and playback them with speakers matching the frequency response and air pressure . So you need speakers equal to the number and characteristics of instruments themselves. On top of that you need to record them ideal microphones and store them loslessly in the process.
Otherwise, you can't create the sound by recording 100 people with 20 microphones, and downmixing them to two channels. It's not possible. I played in double bass in an orchestra, listened countless orchestras, listened the recordings of our own concerts. The gap is enormous.
It's a very well balanced system for my needs and room size. That's a pretty nifty setup for me.
If using plain old "stereo" mode instead, this problem doesn't occur, but you need a higher overall bitrate for correlated sounds to come through at the same quality, so it's rarely used at modest bitrates and instead tends to be reserved for only the highest bitrates.
Thus, comparing mp3@192 with mp3@320 often actually means comparing mp3@192joint with mp3@320stereo and therefore the listener will find very little if any improvement in the quality of mono-miked center-panned sounds (vocals, etc.) but a decent improvement in the quality of wide sounds (cymbals, reverb, string sections, etc.) since the 320 will have only a few more bits for "mid" but way more bits for "side" so to speak, relative to the 192.
Is this only an issue for mp3 or do other codecs also use fewer bits for the difference between channels?
Usage: "file test.mp3"
Rsult: test.mp3: Audio file with ID3 version 2.3.0, contains: MPEG ADTS, layer III, v1, 320 kbps, 48 kHz, JntStereo
The tests I have done is all encoded by myself. I have purchased 24bit WAV of Radiohead's OK Computer Remastered. I encoded it to FLAC, and 320CBR Stereo with LAME. I still can feel the difference on soundstage, and can create a audible residue file by subtracting MP3 from FLAC version.
I agree that current iteration of encoders create very good audio, however given that your audio system can render high resolution audio, the difference is still audible.
For active listening, the gain going from 320 MP3 / 256 AAC to lossless is beyond minuscule. What you are hearing is far more likely to be placebo.
MP3@320kbps CBR and AAC@256kbps are pretty good for normal listening, but if you have the hardware to render, lossless formats creates a richer soundstage. I have an amplifier which can render it, and I'm listening music with it for 30 years now, so I can hear the difference.
At the end of the day, if your audio pipeline can render the differential residue between MP3@320kbps and FLAC, you can hear it.
Now, you can say that "are you attentive enough to perceive such difference", I'm not listening that intently 75% of the time, but it pays off when I put some time aside to listen to my favorite album for the sake of listening it.
no question opus is the more efficient codec
Hm? What codec was uploaded if it's an official upload?
As opposed to some mp3 ripped off a scratched CD in some guy's drawer.
Why?
For example, there are many songs on YouTube listed as "Provided to YouTube by CDBaby". (Here's one: https://www.youtube.com/watch?v=VxHpQ668gzA )
CDBaby only provides one format, which is mp3. They'll accept uploads in any of four formats, of which one is also mp3.
So you'd need to answer two questions:
1. Is the file that CDBaby distributes to YouTube the same file they distribute to everyone else, or is it the same file they receive from the artist? (Note: if the answer is #1, that is likely to save CDBaby a bundle on storage!)
2. What did the artist upload to CDBaby?
And then you'd also need to answer analogous questions for the other major providers of official music on YouTube; there are tons and tons of them. CDBaby appears to be unusual in that, in addition to providing your music officially to YouTube, it will also sell it to consumers. Most of these services don't appear to offer anything but official distribution to major websites.