I won't be bothered in a home network.
> Clonezilla are vastly more moving parts
...and one of these moving parts is image integrity and write integrity verification, allowing byte-by-byte integrity during imaging and after write.
> I strongly recommend against oflag=direct as in this... [snipped for brevity]
Unless you're getting a bottom of the barrel NVMe, all of them have DRAM caches and do their own write caching independent of O_DIRECT, which only bypasses OS caches. Unless the pipe you have has higher throughput than your drive, caching in the storage device's controller ensures optimal write speeds.
I can hit theoretical maximum write speeds of all my SSDs (internal or external) with O_DIRECT. When the pipe is fatter or the device can't sustain that speeds, things go south, but this is why we have knobs.
When you don't use O_DIRECT in these cases, you see initial speed surge maybe, but total time doesn't reduce.
TL;DR: When you're getting your data at 100MBps at most, using O_DIRECT on an SSD with 1GBps write speeds doesn't affect anything. You're not saturating anything on the pipe.
Just did a small test:
dd if=/dev/zero of=test.file bs=1024kB count=3072 oflag=direct status=progress
2821120000 bytes (2.8 GB, 2.6 GiB) copied, 7 s, 403 MB/s
3072+0 records in
3072+0 records out
3145728000 bytes (3.1 GB, 2.9 GiB) copied, 7.79274 s, 404 MB/s
Target is a Samsung T7 Shield 2TB, with 1050MB/sec sustained write speed. Bus is USB 3.0 with 500MBps top speed (so I can go %50 of drive speeds). Result is 404MBps, which is fair for the bus.If the drive didn't have its own cache, caching on the OS side would have more profound effect since I can queue more writes to device and pool them at RAM.