VMCs are essentially one or two ventilators in a device designed to push and/or extract air from a closed space to the exterior. Simple flux generally extract, then since you do not vacuum a home external air enter the home from various passages, it's good to exchange air, but not much in energy consumption terms. The double flux suck air out of humid places like kitchens and bathrooms, push exterior air in rooms etc balancing the volumes, with a central point to exchange heat. The passive one is roughly simple, essentially air flux are divided by a set of passages and the dividers allow the heat to pass from the outgoing air to the incoming. They can't recover all the heat/freshness but they still help because you get let's say hot exterior air in summer that get cooled in the device by the outgoing interior air, the opposite in the winter, a small extras to dump condensation, some filters to protect the ventilator etc. The active one is a heat pump, like a minisplit, where the exterior side is in the outgoing flux and the interior side on the incoming, so in winter you pick heat from the outgoing air, witch is normally MUCH "hot" than the incoming, and in summer you push heat in the outgoing air witch is normally much "cooler" allow for a significant COP.
In mild climate and insulated homes an active (also called thermodynamic) VMC suffice to ventilate, heat and cool the home, in less mild climate can be integrated with others appliances too heat/cool the home.
Personally in the Alps I have an active one in a new (5 years) home and with ~10kWh/day suffice for most spring and autumn alone, integrate minisplit in summer and water-water heat pump in the winter. A passive double flux VMC can be just 1-2kWh/day but of course it can't regulate humidity and can heat/cool the home, just allow to waste much less heat/cool while exchanging air.
They are normally present in cold climate home where insulation was a thing since decades, so we need to exchange air anyway, they start to appear in hotter and mild climate since many have started to realize that a home for cold climate works as well in hot climate, because insulation is the same, you only need to tune the thickness and choose elements to shield the Sun in summer/allow it to penetrate as much as possible in winter. The same overall design from the arctic to tropic.