> 1.6 miles and 44 pounds
pure copper density at 9000 kg/m3, wire diameter assumed at 1mm, length at 3000 m (1.8 mi, approx) gives 21 kg, approximately 46 lb. math checks out.
> the company claims a 20 percent savings in material costs and 15 percent reduction in its carbon footprint between Gen 1 and Gen 2.
surely this is not just due to the reduction of copper. copper is around 10 USD/kg at bulk.
now let's see if we can address the copper length number. can 1.6 mi (< 3000 m) of copper be saved from wiring alone?
The car dimensions are 2m x 5m. That means, in the worst case, two ECUs placed at opposite ends will need 5m of wire (half of perimeter). There were 17 ECUs originally. Call it n = 20, and if we wire dense (in the graph sense), we get n^2 = 400. So, in the absolute worst case, the densest possible graph would have had 5m x 400 = 2000 m of wire. The claimed wire saving is significantly (but not by an order of magnitude) larger than this. I would say this passes the smell test (albeit barely), but original wiring must have been truly inefficient.