Like another poster already said, the power budget of a consumer CPU, like 9950X, executing programs at a double clock frequency in comparison with a GPU, allows for 16 cores x 2 execution units x 16 = 512 FP32 FMA per clock cycle, which provides the same throughput like an 1024 FP32 FMA per clock cycle iGPU from the best laptop CPUs, while consuming 3 times less power than a datacenter GPU, so the power budget and performance is like for a datacenter GPU with 3072 FP32 FMA per clock cycle.
However, because of its high clock frequency a consumer CPU has high performance per dollar, but low performance per watt.
Server CPUs with many cores have much better energy efficiency, e.g. around 3 times higher than a desktop CPU and the same with the most efficient laptop CPUs. For many generations of NVIDIA GPUs and Intel Xeon CPUs, until about 5-6 years ago, the ratio between their floating-point FMA throughput per watt has been of only 3.
This factor of 3 is mainly due to the overhead of various tricks used by CPUs to extract instruction-level parallelism from programs that do not use enough concurrent threads or array operations, e.g. superscalar out-of-order execution, register renaming, etc.
In recent years, starting with NVIDIA Volta, followed later by AMD and Intel GPUs, the GPUs have made a jump in performance that has increased the gap between their throughput and that of CPUs, by supplementing the vector instructions with matrix instructions, i.e. what NVIDIA calls tensor instructions.
However this current greater gap in performance between CPUs and GPUs could easily be removed and the performance per watt ratio could be brought back to a factor unlikely to be greater than 3, by adding matrix instructions to the CPUs.
Intel has introduced the AMX instruction set, besides AVX, but for now it is supported only in expensive server CPUs and Intel has defined only instructions for low-precision operations used for AI/ML. If AMX were extended with FP32 and FP64 operations, then the performance would be much more competitive with GPUs.
ARM is more advanced in this direction, with SME (Scalable Matrix Extension) defined besides SVE (Scalable Vector Extension). SME is already available in recent Apple CPUs and it is expected to be also available in the new Arm cores that will be announced in a few months for now, which should become available in the smartphones of 2026, and presumably also in future Arm-based CPUs for servers and laptops.
The current Apple CPUs do not have strong SME accelerators, because they also have an iGPU that can perform the operations whose latency is less important.
On the other hand, an Arm-based server CPU could have a much bigger SME accelerator, providing a performance much closer to a GPU.