All that being said it’s unusual to find a cable that is both clean enough to do the handshake and keep sync but noisy enough to give you visible snow. So it’s still quite true that practically speaking, yes, it’s usually an all or nothing deal. Cable quality can and does matter though. I was a BlueJeans customer for a long time before the brief Monster spat, but it endeared them to me, and I still try to buy from them when I need to buy a cable I need to be absolutely sure of.
The only such error correction I'm aware of is when reading data from a CD, which at this point is a tiny part of digital audio. Is there something I'm missing?
FEC and other types of error correction or recovery is ubiquitous in wireless audio and communications applications including phone calls, Bluetooth, VoIP, wireless microphones, and digital radio. Responsibility for the error correction is sometimes part of the underlying transport mechanism and sometimes incorporated directly into the codec. Encryption & privacy requirements for audio also mean that we solved these problems long ago. IIRC that the WWII SIGSALY encrypted telephone between the US and UK required and implemented error correction.
By contrast, most audio-over-IP formats do not (they rely on the IP-level checks).
Anyway, thanks for pointing out the rather important world filled with codecs that we actually live in.
That's not been my experience with hdmi or dvi. Bad cables or bad connections can result in artifacts in the display. Sometimes bad cables can result in difficulty negotiating but a good result if negotiate succeeds. Bad cables can result in frequent dropouts as the signal quality varies around the threshold.
Differences in cable construction may lead to more or less longevity in difficult environments: frequent connection cycles, movement in the cable, heat/humidity/other environmental stuff, tight bends, etc.
Certainly, once you reliably meet the threshold SNR for accurate reception, a better cable doesn't help much.
Does that need oxygen free, cold extruded in zero-g cables? No. But a well made cable is likely to last longer in challenging environments.