Though all three are pretty safe as long as you buy the appropriate equipment, and take reasonable precautions when installing it.
Though all three are pretty safe as long as you buy the appropriate equipment, and take reasonable precautions when installing it.
You need thicker wires with 48V than with 120V or especially 240V, and the higher currents required at 48V can create more risk of fire from overheating conductors, for example in a wire that's too thin or a spring contact in an outlet that's worn out.
Perhaps you are implicitly comparing 48Vdc to 24Vdc, 12Vdc, or 6Vdc, rather than the 240Vac or 120Vac I was comparing it to. Those lower voltages do indeed need even thicker wires and pose even less risk of shock or arc faults than 48Vdc. I think 24V is the minimum to maintain an arc in air at atmospheric pressure, and it's really hard to get one started using a 24V supply; you need a high-frequency start circuit or a substantial amount of inductance in series.
48V is the maximum usually considered safe enough to not require compliance with any kind of electrical code; an expert electrician from North America once told me that it's in a category known to electricians as "bullshit wiring".
What? Common wisdom is that DC shock risk is worse than AC, as DC makes your muscles clench up and so it's harder to let go of whatever you grabbed. That "120Vac" is actually 170V peak though, which does increase shock risk for equivalent power transferred (maybe this is what you meant?).
It's complicated, though. If you're running a low-level current through your body for a long time, like in the neighborhood of a milliamp, DC is much worse because it migrates your electrolytes around. And if you're using metal electrodes it might be migrating the metal from the anode into your body. So TENS units are strictly AC, with no DC bias permitted.
There really are some shock risks that result from your body being heated as a resistive load, like internal burns, but those are not at the top of the list, especially at only 120Vac.