Or have they removed that ability from newer automatic transmissions? (my last few cars all have manual transmissions)
Or have they removed that ability from newer automatic transmissions? (my last few cars all have manual transmissions)
One of the interesting things from one of the other articles was related to depressing the brake. Apparently one of the solutions to resetting the out of control acceleration was to completely remove your foot from the brake before trying to brake again.
This may sound curmudgeonly, but that is one of the reasons that fly-by-wire makes me so uncomfortable. In my car, the accelerator is attached to the throttle by a cable, and that's the way I like it :). I was driving my girlfriend's 2010 Pontiac Vibe the other day (essentially a Toyota Matrix) and stopped at a slippery intersection. When I went to get going again, the traction control system detected that it was slippery and, as far as I can tell, did throttle limiting to prevent the wheels from slipping. This is one of the most uncomfortable feelings I've ever had driving a car... I pressed the accelerator and there was no response.
Most decent cars let you disable the traction control (which is necessary sometimes)...
But yes, sometimes the newer technology doesn't work as well as the older technology, depending on the conditions and driver skill. I've had ABS kick in a few times and it's really disconcerting, I almost prefer not having it. Traction control is great for tiny patches of ice or rain, but terrible when the roads are covered in fresh snow.
My old Saab 900 Turbo was the best winter car I'd ever had, could basically plow through anything the front bumper could clear (and never failed to start - even when it was minus 40 degrees). My new car is adequate, but not nearly as good when it gets really ugly...
And fly-by wire IS scary, they should never eliminate physical connections for certain functions (accelerator, brakes, steering).
There's a way to disable the traction control, but figuring it out wasn't what I had in mind while stuck at a 4-way stop.
This is the case for "semi-automated manuals" like DCTs as well as automatics.
For e.g: to shift to neutral or disable a Prius at speed you have to "hold" the shifter in the neutral position [note: it doesn't seem to stay there like it would on a traditional automatic gear selector; it's spring loaded] or "hold" the ignition switch for 3-5 seconds. This is (presumably) to prevent the motor & trans from grenading itself.
I haven't driven a vehicle newer than model-year 2003 recently: so in a panic situation I would expect my cars to make the "money shift" and blow up their powertrains; not "ask me for confirmation" that I want to destroy my motor.
Having to wait to make a money-shift seems like a feature that looks excellent on paper, but terrible in practice. I find it difficult to buy a car which only has firmware-implemented kill switches.
Reverse is achieved by running the electric motor in reverse. There is no reverse gear.
Shifting the neutral on the prius just means disconnecting the MGs and turning off the ICE.
Are they hydraulic from the brake pedal to the brake pad, or is the brake pedal just a software input to a brake control system?
From one of the other articles on the Camry unexpected acceleration issue, emphasis theirs:
"Vehicle tests confirmed that one particular dead task would result in loss of throttle control, and that the driver might have to fully remove their foot from the brake during an unintended acceleration event before being able to end the unwanted acceleration".
The natural approach seems to cause as many problems as it might otherwise fix!
I submit to you that if X is buggy, the little black box may decide never to allow pressure to hit the brakes. This in turn prevents braking.