The reason we keep going back to silicon is the planet (the crust) is basically made out of it. It's available in any quantity.
The reason we keep going back to silicon is the planet (the crust) is basically made out of it. It's available in any quantity.
Methylammonium ions can be had from methylamine, which is dirt-cheap (made from methanol and ammonia, usually).
Halogens are fluorine, chlorine, bromine, iodine. All common and cheap.
Plumbates are lead and oxygen. Again, common and cheap.
So, no, there shouldn't be any supply problem.
Disposal might need some watching due to the lead, but I doubt this would involve anywhere near the volume that's used in (e.g.) lead-acid car batteries.
The public has already been educated a bit about methylamine as an industrial chemical
http://www.cbsnews.com/news/video-behind-the-breaking-bad-tr...
Lead is also somewhat rare.
> All common and cheap.
Exactly what I'm talking about. In the small quantities we use currently - common and cheap. In the quantities needed to make energy? Not common at all.
> So, no, there shouldn't be any supply problem.
Actually, if that's what it's made of there will be huge supply problems.
Based on all this I suspect this is the last we will hear of this technology. It works in the lab, but is not practical at scale.
Although maybe those elements are just used at ppm levels, and the bulk of this is silicon, then this could work.
> but I doubt this would involve anywhere near the volume that's used in (e.g.) lead-acid car batteries.
To provide energy at country level scales? It would use WAY more. I once calculated that there is not enough lead on the planet to make enough batteries to store enough energy for overnight use. (In the context of batteries to buffer the diurnal nature of solar energy.)
On the other hand, 5% of England is billions of square meters. http://www.wolframalpha.com/input/?i=5%25+of+the+area+of+Eng...
Anyone who doubts that your battery calculation was correct should read "A Nation-Sized Battery" by Tom Murphy, a physics professor at University of California. His other blog entries do a fine job with similar calculations for other energy technologies.
https://physics.ucsd.edu/do-the-math/2011/08/nation-sized-ba...
All of these are available in quantity. Bromine is available in tank-car lots. Iodine is available in tonne lots.
"Lead is also somewhat rare."
"Somewhat rare", perhaps, but it only sells for about $1/pound, and 8 million tonnes are produced annually.
"Actually, if that's what it's made of there will be huge supply problems."
Actually, you're totally wrong. Sorry.
"I once calculated that there is not enough lead on the planet to make enough batteries to store enough energy for overnight use."
Batteries use multiple heavy plates of solid lead. This is a micrometer scale thin film on a substrate. There's a difference.
Lead has a density of 11,340 kg/m^3.
A ten micrometer thickness means that each m^2 of material will use about 0.11 kg of lead.
While the earth receives something like 1,000 watts/m^2 in full sun, other factors (e.g., night, clouds, different sun angles) mean that the mean is closer to 250 watts/m^2.
This stuff is expected to reach 20% efficiency, so each m^2 of collector will produce a mean output of 50 or so watts.
Human civilization as a whole produces about 15 terawatts of power, so replacing it would require about 300 billion square meters of collector.
At 0.11 kg/m^2, that would require about 33 billion kg of lead.
World production of lead is about 8 billion kg per year.
So, unless I messed up the arithmetic (please correct if so) total replacement of all existing power sources would require only about 4 years of lead output. Given that that will never happen (and even if it did, the time scale would be much longer than 4 years), it is safe to say that the availability of lead is not a limiting factor for this technology.
The trouble is that at current rates of consumption the world will run out in 42 years (according to wikipedia). So this project would use 20% of all the remaining lead in the world. (Well not really, the film is not 100% lead, but it's still quite a lot.)
I call that "not enough". Although it might be worth it anyway. But what do you do when energy use goes up?
And despite people saying there is bromine and iodine in the ocean, there is no practical way to get it out of the ocean in quantity. There is everything in the ocean - in huge quantities! For example 1/10 as much gold as has ever been mined by humans exists in the ocean - but no one can get it out in quantity.
World production of iodine is about 1/200 of lead production and we already see that we barely have enough lead.
And world existence of iodine is 1/100 of lead. And considering we need a significant percentage of the lead in the world, there is no way there is enough iodine.
But we are ignoring the substrate. It won't be so thin, so we'll need a lot of it. I wonder how much of it is for mechanical strength (i.e. replaceable) and how much is essential.
Maybe this could work - using a thin film is very promising, but I'm skeptical this could be scaled.
You're probably going to reccomend Thorium, but the barriers to commercialisation there are more serious.
Personally I suspect we'll end up with 30% solar, 30% wind, 40% other (tidal, nuclear, geothermal, biomass etc).
This is a useful technology only because it is inexpensive. If it were more expensive it would not have value.
Because it relies on rare elements it can not be used in scale because as soon as you do the price goes up, it is no longer inexpensive, and no longer useful.
This feedback loop has killed every solar technology I've read about except silicon.
A downside of these cells is buried at the bottom of another article: http://www.pbs.org/wgbh/nova/next/tech/photovoltaic-material... especially vulnerable to water damage if the seal fails.
Edit: actually, it seems from the more detailed descriptions that the perovskites useful in solar cells have a totally different chemical formula from the common geological ones, so your point about abundance of silicon needs to be measured against whatever elements these (presumably synthetic) perovskites contain.