Raspberry Pi is a nice thing for $35. For $75, much nicer alternatives exist.
Raspberry Pi is a nice thing for $35. For $75, much nicer alternatives exist.
Also case and PSU aren't a problem, either you get a Pico PSU for 50$ with a cheap case, or you take a case that include a PSU. They are cheap and the fan are noisy but for under $60... http://www.newegg.com/Product/Product.aspx?Item=N82E16811154...
http://ark.intel.com/products/78953/Intel-NUC-Kit-DN2820FYK?...
I believe that includes the Wifi/Bluetooth module already, but not the DDR3L RAM module or an SSD/HDD.
If that model is missing something you need you can of course opt for one of the more expensive ones - there is a reasonable range. I'm considering getting one to act as a router, DD-WRT/OpenWRT on consumer/SOHO router hardware is incredibly fiddly. The power consumption of some of these devices is comparable.
On x86 front, if size matters, you can take a look at this: http://www.newegg.com/Product/Product.aspx?Item=N82E16813135... ($32 after rebate). It needs a stick of alaptop RAM and a laptop power brick. You can load XBMC from a USB stick.
If size doesn't matter, look for AM1 CPU/motherboard. CPU will run you $31 (http://www.amazon.com/AMD-Sempron-2650-1-45Ghz-AD2650JAHMBOX...) and motherboard, $34 (http://www.newegg.com/Product/Product.aspx?Item=N82E16813157...).
These ARM boards certainly have their place. We use one to drive a TV with build/bug/CI status. RPi is too slow, and x86 is too big to fit, but a beefier board (Odroid-u3) is just fine, and still hangs behind the TV running on its USB port. But for most of the other projects, either a RPi is good, or you'd be better off with x86.