Security motion detectors can be used to double effect here as well, you would naturally have them facing doors so they could activate wireless or through signals across existing wires. All sorts of options.
Security motion detectors can be used to double effect here as well, you would naturally have them facing doors so they could activate wireless or through signals across existing wires. All sorts of options.
We have Hue and I don't agree. Setup is now zero effort, you just replace bulbs and you are ready to go. Since the light bulbs form a mesh network, the distance from the hub is not a problem as long as a light can connect to another. I would have never switched if we had to replace each light socket, even more because we are renting our house. Also, the expected lifetime is 15 years, so I am not sure how much of a problem it is.
<ot> In general, we are pretty happy with it, especially since its color is much nicer and more natural than previous LED lights we tried (which were awful). The Android app is a bit flakey at times, especially when the home Wifi signal is weak (we don't use the geofencing options). The feature we use most is different light settings, e.g. relatively warm & low light at night (e.g. when we have to feed our toddler).
Of course, it isn't life-changing. And I would recommend most people to wait until prices go down. </ot>
The control logic should ideally go into the socket, but with 50k hour lifetimes of LED bulbs, the lost efficiently of putting it in one over the other place is trivial. Also remember that putting the controls on the bulb makes it a trivially user-serviceable part, where putting it in the socket technically requires a electrician to install it (you and I are probably comfortable servicing domestic electrical installations, the average consumer isn't, and shouldn't be) - especially in these early days, when neither standards, features or protocols are anywhere near finalised, investing a couple of hundred dollars in bulbs is much better than investing thousands in electricians fees.
As for the needing an electrician part: remote socket receivers are a well proven, cheap and safe technology requiring no electrician to install it. IMO, the Telldus offerings are the best solution for wireless/smart light controls.
Personally at my home, I can't recall a single LED bulb failing since installing some of the first ones in 2010/11 (and these were dirt cheap ones from Lidl). We've also bought some decent e27 8w ones from Aliexpress in ~2011, and of the 6 I bought, they all still work (apart form the cold white one which I took apart). Throughout the past two years I installed a bunch of LED strips around the house, ~20m of which stay on at low power all the time, and I've virtually had zero failures (there may have been a 3cm segment that died, but that's it).
>I've had several expensive (Phillips/GE) LED bulbs fail after a year of sparse usage.
You have an electrical problem in your home. Perhaps a poor connection on the neutral leg of the circuit. It is even potentially unsafe, as in a possible arcing condition.
I'm more inclined to believe it is caused by the crappy wiring system that is standard in my country, where there is not a neutral lead and a live one, but two live ones with a phase shift.
If there was one, there may be others. I've located several loose junctions in my attic (on my bathroom electric strip heaters). They were easy to spot because of the discolored insulation. At my own home my connection to the electrical grid also had such a fault (a corroded junction on one phase). It was an intermittent but persistent fault and I am surprised that I didn't ruin more electrical stuff before I found it.
>I'm more inclined to believe it is caused by the crappy wiring system that is standard in my country, where there is not a neutral lead and a live one, but two live ones with a phase shift.
Sorry, I shouldn't have assumed you were in North America.
Plus you can do wonders using in house wiring for having various items talk to each other. Wireless seems overkill to individual items.
Agree with this completely. As the article mentions, with a wireless bulb the wall switch actually becomes a point-of-user-failure and he wound up taping them 'on'.
I have a WeMo brand wall switch (actually a button) on my front porch light which solves this elegantly. Porch light goes on and off timed with sunrise and sunset (it updates its schedule over wifi) and if need be I can control it manually from the wall switch or the app.
I wouldn't replace every circuit in my house with one, but in the right application it's golden.
Remember, Phillips is the reason incandescent bulbs had their lifespans intentionally cut in half for planned obsolescence.[1]
1.http://spectrum.ieee.org/geek-life/history/the-great-lightbu...
Because all companies have the same management and culture as they did 90 years ago.
If Philips simply launched a bulb that lasted less, with no advantages, people would buy from other manufacturer, and Philips wouldn't be here anymore. They even took a huge risk launching it, because despite it being cheaper to use, people do not like changing bulbs.
I can take a handful of lightbulbs with me to other room/apartment in a heartbeat. And the problem of getting dimmable LEDs out of an AC source is not easy, you are going to end with electronics in each led bulb anyways.