ECC RAM and redundant PSUs alone should be unquestioned advantages over standard desktops.
Not to mention hardware raid controllers, IPMIs, designs that allow fans and other parts to be serviced without downtime... :P
ECC RAM and redundant PSUs alone should be unquestioned advantages over standard desktops.
Not to mention hardware raid controllers, IPMIs, designs that allow fans and other parts to be serviced without downtime... :P
ECC RAM will both work-around and warn you about the start of RAM failures before complete DIMM failure.
And sure, consumer drives have the same MTBF as enterprise drives in practice[1], but: when RAIDing consumer disks, make sure that you get models that immediately report read/write errors, instead of retrying, which is the main (or only, if SATA) difference between enterprise and consumer drives.
If you have a nice RAID setup, you DO NOT want a drive to retry a failed block read 15 times before reporting a problem, and causing latency: you want the failed read to be reported immediately, so your controller can pull the same block from a different disk, and start diagnosing possible faults.
1 https://www.backblaze.com/blog/enterprise-drive-reliability/