9,936 karma · joined October 18, 2013
What’s new is Americans killing each other over it.
The polarization is extreme in part because news sources now need clicks to survive, and Outrage gets more clicks than reason.
End result is some Americans become so outraged they loot and burn cities and in some cases, kill. And seemingly, their peer pole finds the mayhem understandable.
That’s what’s new.
Perhaps it could be successful for people who are technically competent, but have a severe stage fright when interviewing. At the lease, you'd want the stand in to record the interviews so you could watch and learn who's who and get the context of the job before starting.
If it was dinner time and she needed us all, she'd blow 'Shave-and-a-haircut-two-bits'.
- These legacy chips fabbed at legacy nodes are made with legacy equipment. In many cases, that equipment is a) fully depreciated and b) no longer available. Yes, most chips can be made with new equipment, but the profits with a new tool set are not going to justify the expense. You wouldn't buy a new $8 million CVD tool to make a 180 nm microcontroller that might sell for $2.
- Many chips are fabbed at 1 place only. The chip company owns the IP and has a defacto monopoly on the features of that chip, or even class of chips. If that fab is shut down, no more are being produced and customers have to buy up what brokers can scrounge. The more warehouses get picked out, the higher the prices go. In one extreme example, a chip made at Infineon's Kulim fab in Malaysia, that sold for $0.47, was purchased for $100 @ by (ironically) a chip equipment company.
- Hoarding has made the issue far worse. Companies are instructing buyers to order more than 1 year ahead, and seeing lead times exceed 1 year as well. The more these lead times extend, the farther into the future buyers extend their horizon and lead times just keep rolling.
- It may actually be the case that organic demand growth is not the main problem. More likely, it was the successful (and therefore vulnerable) just-in-time supply chain that collapsed as soon as COVID interrupted the choreographed flow of material.
Yes, not everything fits right in my 2018 Model 3. The right headlight is not flush with the hood. You can hear that the windows aren't secured when rolled down and you close the door.
Everything else is brilliant. 95k miles in, I've had zero drive train or mechanical issues. Three sets of tires and an underbody shield that tore when I hit 6" of standing water at 70mph. Conversely, the punch when you hit the accelerator is exhilarating, takes curves flat and fast, the sound system is excellent, it's so quiet, I can drive for hours without physical discomfort, the seat material is durable and doesn't scuff or fade.
I drove a 328i for 20 years that I loved dearly. I haven't given it a 2nd thought since buying the Tesla.
If you're a hiring manager in a large company, what are the pros and cons you see about hiring engineers who have only worked in startups?
Vice versa, if you're a hiring manager in a startup, what are the cons and pros you see about hiring engineers who have only worked in Fortune 500 companies?
- These legacy chips fabbed at legacy nodes are made with legacy equipment. In many cases, that equipment is a) fully depreciated and b) no longer available. Yes, most chips can be made with new equipment, but the profits with a new tool set are not going to justify the expense. You wouldn't buy a new $8 million CVD tool to make a 180 nm microcontroller that might sell for $2.
- Many chips are fabbed at 1 place only. The chip company owns the IP and has a defacto monopoly on the features of that chip, or even class of chips. If that fab is shut down, no more are being produced and customers have to buy up what brokers can scrounge. The more warehouses get picked out, the higher the prices go. In one extreme example, a chip made at Infineon's Kulim fab in Malaysia, that sold for $0.47, was purchased for $100 @ by (ironically) a chip equipment company.
- Hoarding has made the issue far worse. Companies are instructing buyers to order more than 1 year ahead, and seeing lead times exceed 1 year as well. The more these lead times extend, the farther into the future buyers extend their horizon and lead times just keep rolling.
- It may actually be the case that organic demand growth is not the main problem. More likely, it was the successful (and therefore vulnerable) just-in-time supply chain that collapsed as soon as COVID interrupted the choreographed flow of material.
Perhaps jobs are scarce and this worker really has no place to go and must endure the abuse. Once BI is introduced, what percent of workers would quit and stop working, vs. quit but find new employment using the BI to bridge expenses in the meantime and be able to make a full time effort of the search?
BI should make employees more mobile and employers with unpleasant work will need to pay more to get those positions filled.
It seems there's a background activity in the mind that is actually synthesizing a wide variety of inputs from our environment. As in what I read, movies I watch, meetings I sit in on, Tweets that transpire, hikes I take, visits to distant cities, and so on. In many cases, it seems the connections and support for ideas, notions and realizations that then become knowledge are made without explicitly reasoning through them.
I'd say this happens most frequently in conversations related to my work, which makes sense since that's where most of the inputs are sourced.
Also shows additional confidence in selecting a winning cohort.
Toyotas have positive resale value up to an average of 210,000 [0]. After that point the cost of maintaining them is (theoretically) greater than the resale value.
It seems they are targeting a refresh about every 3 years, and doing that 2 times. The lifetime would then come in at about 10 years, which is right in the ballpark of 200,000 miles.
[0] https://www.forbes.com/sites/jimhenry/2014/05/31/toyota-lead...
Put new tires on the front and the problem is solved.
The primary costs of starting up a fab are 1. facilities, 2. equipment. Facility per square foot is likely the most expensive you'll find due to the appurtenant systems required for air flow and purity, a variety of gas handling systems, ridiculous electrical power systems, possibly gas plant systems, water purification and then treatment systems for both air and fluids exiting the plant. Some truly scary toxins are used and produced and have to be contained or captured and neutralized.
In terms of equipment, you'll need at least one of each of 40 types. Lowest cost is about $500,000. Highest is likely $25,000,000 (at the geometry you're talking about). Average in the area of $3,000,000 - $5,000,000. You'll need a cadre of engineers and scientists to keep it all running, and 2-3 years from breaking ground to producing product. If you did buy one of each tool type, you'd have most of them sitting around doing nothing most of the time, since the process times vary dramatically. In reality, you're looking at $500,000,000 minimum to build a fab that can produce $0.47 chips. Seriously, you don't want to do that.
(for context, Freedom Tower cost US$2 Billion.)
https://www.idtechex.com/en/research-article/ev-power-electr...
As those chips run through their life-cycle, their value drops. After 15 years, the price the chips can sell for will drop 90% or more.
If there is a spike in demand at that point, there is no ROI on purchasing brand new equipment.
The demand spike is seen as temporary. Hence, the chip makers are telling the buyers to design out the old chips and upgrade to new. Many companies can do this. But some are constrained by industry regulation (aerospace) or industry practice (semiconductors).
I've mentioned before the irony that companies that make semiconductor equipment are struggling to ship more tools because they can't get enough (of certain chips) to complete building them.
However, older chips are difficult to increase capacity for. The tools are not available, and the profit from legacy chips from them is many times insufficient to make the business case for.
1. There was real and relatively sudden increase in demand:
a. COVID-driven in part, all students and many additional employees had to buy computers to study/work from home,
b. a., driven by video, lead to increased demand on Internet & telecom infrastructure.
c. Electric vehicles consume an order of magnitude more chips than ICE cars. EV demand is also skyrocketing.
2. There were fabs (semiconductor factories) shut down due to COVID. This one in Malaysia [0] makes power chips and was particularly problematic for ICE auto makers.
3. The first indication of problems manifested in chip lead times pushing out. As buyers started to see more and more of this, they started increasing orders and soon adopted a hoarding mentality, similar to why many of us couldn't find toilet paper in stores early in the pandemic.
Result: As a personal anecdote, a chip that sells for $0.47 from that fab in Malaysia recently sold for $75 on the broker market.
Note that no, the state of the art fabs cannot be re-outfitted to make legacy chips. The old equipment they were developed on is generally no longer available and the profit from making those inexpensive chips would not justify the capital spend on new equipment.
[0] https://www.reuters.com/article/infineon-results-malaysia/in...
I was asking, and still hoping to see, the metrics and data that point to demise of the US middle class.
BTW, the car came with 310 mile range. Tesla upgraded that to 325 after about a year.
Now, range is 290.
Otherwise, it's been a fantastic experience. Incredibly fun to drive.
Overall, American households are increasingly wealthy, class divisions notwithstanding.
[0] https://www.rand.org/blog/2021/05/most-americans-consider-th...