When I start cooking downstairs, within a minute or so I hear the purifier upstairs ramp up to full speed.
4,928 karma · joined February 6, 2016
When I start cooking downstairs, within a minute or so I hear the purifier upstairs ramp up to full speed.
Cheapest Fiat Panda goes for €19,990 in my country. Taxes on new cars are enormous here.
That seems to be the only ICE model they still sell, and for how long will they stil sell that? The even smaller Fiat 500e is €28,990.
That car is not suitable for my use-case. Any situation where I would use that car is one where I would use my e-bike instead. I basically use my car for those occasions where I just need to transport a bit more than I can take on my bike. It doesn’t have to be huge, but that Ami is just not enough.
No, I’m not. My current car weighs less than a thousand kilos (945 to be precise) and the speed limit in basically the entire city is 30km/h.
Newer cars are ‘several thousand kilos’ especially because of all the regulations. Just being an EV adds a significant amount of weight due to the battery.
I rarely drive my car. When I do, 99% of the time it's within a few kilometers of my house. I have no need for lane keeping or automatic braking in city traffic, it's barely moving to begin with.
My car is also getting old and will soon need replacing. Ten years ago you could buy a brand new small car for well under €10k. Sure, it didn't have all the bells and whistles but I have no need for those anyway. Nowadays, you're looking at €30k+ for a new, small car precisely because of the safety regulations, emission standards and the fact that it's practically impossible to buy a car with an ICE anymore.
I understand the need for these things for cars that are driven daily, but why do they have to apply to cars that are mainly used for short trips to the grocery store? It's making cars unaffordable for the vast majority of people.
Not just for the whole day, I ofter make a trip in the morning for breakfast/lunch and another in the evening to get whatever I need for dinner.
we have a Jumbo near here that is below a parking garage and they have something similar, but it's an entirely passive system. The sloped movable walkway to the parking garage floor has this grooved pattern in it's surface anyway (so you don't slip) and the wheels have a similar pattern so they just sink into the grooves on the walkway. There's a brake pad next to each wheel just above the floor and as the wheel sinks into the grooves the brake pad touches the walkway locking it in place. At the beginning/end of the walkway there are these sloped protrusion into the grooves on the walkway that lift the cart out of the grooves as it reaches the end. No fancy locking system needed.
I think my main problem is that handwriting is so slow. I get impatient and rush it turning it into a mess. Reading it is also slow, even when written by someone with good handwriting it's a PITA to read cursive. I hope it dies out sooner rather than later.
One disadvantage compared to traditional mounts is that they absolutely need guidance, and with a pretty fast guide loop at that (like 0.5s). You can’t do long unguided exposures with a strain wave. But anyone who’s serious about astrophotography is guiding anyway so that’s not really a big deal.
And that's another thing: if you use a 3rd party e-mail service then you have to trust a 3rd party not to abuse that. If they have control of that email address they can take over your account. If it's a temporary address, who's to say when that address gets reused?
If you don't use a 3rd party service then you have to have your own domain for that e-mail address, that domain name can then also be traced back to you.
If you want it to be anonymous, you shouldn't use e-mail at all and only allow passkeys.
You can find it here: https://www.thermoworks.com/12volt-ac-adapter/
Not sure what you are trying to imply here. Products manufactured in China are of poor quality? iPhones are made in China and it would be a challenge to find any device with higher build quality than that. On the flip side, we all know how terrible the quality of US made cars is.
I don't get this. This idea that 'work life balance' should mean that the two should be compartmentalised to specific blocks of time seems counterproductive to me. To me it feels like an unnatural way of living. 8 hours in which I should only focus on work, 8 hours I should focus on everything else followed by 8 hours of sleep. I don't think that is how we are supposed to operate. Even the 8 hours of sleep in one block is not natural and a recent invention. Before industrialisation people used to sleep in multiple blocks (wikipedia: polyphasic sleeping)
The idea that you have to be 'on' for 8 hours at a time seems extremely stressful to me. No wonder you need an hour afterwards just to unwind. Interleaving blocks of work and personal time over the day feels much more natural and less stressful to me. WFH makes this possible. If I'm stuck on something, I can do something else for a while, maybe even take a short nap. The ability to focus and do mentally straining work comes in waves for me. Being able to go with my natural flow makes me both happier, more relaxed and more productive.
The key to work/life balance to me is not stricter separation but instead better integration.
I’ve seen it on plenty of higher-end devices as well; and even worse.
The worst offender I’ve encountered is the TermoWorks Billows. ThermoWorks is a well established brand that makes high end thermometers and is considered one of the best on the market. So I was quite surprised to discover how their ‘Billows’ product is powered.
The device itself needs 12v and has a USB-C port for power. You’d think it would do USB-PD to negotiate it’s power needs so you can just use any old USB-C adapter. Not the case. It comes with a USB-A to USB-C cable and requires a special adapter with a USB-A port on it that puts 12v on the pins that normally supply 5v.
I have no idea how they came up with this abomination. Why even use USB-A connectors if it’s not going to work with a standard USB-A adapter, and why supply an adapter that’s basically going to kill most USB-A devices you plug into it? If you have a custom adapter anyway, why not just use a simple barrel connector? Why put a USB=C port on the device if it can’t use USB-PD?
I can imagine some Chinese ali-express product using such an abomination to save a few cents on components, but why would a well-respected brand like ThermoWorks ship such a thing? It boggles the mind.
No, because a webpage makes no promise to not change. Even if you check every minute, can your system handle random 1 minute periods of unpredictable behavior? What if they remove data? What if the meaning of the data changes (e.g. instead of a maximum value for some field they now show the average value) how would your system deal with that? What if they are running an A/B test and 10% of your ‘API’ requests return a different page?
This is not a technical problem and the solution is not a technical one. You need to have some kind of relationship with the entity whose data you are consuming or be okay with the fact that everything can just stop working at any random moment in time.
But granny can't go to a bank because they closed down most of their offices. Since 99% of what you need a bank for can be done using their app it no longer made financial sense to have a physical presence in most smaller towns and villages.
Lots of elderly were complaining about this when it happened because they were too lazy to learn how to use the bank apps. Hell, they already started complaining when you could no longer withdraw money at the desk even before they closed down the offices. Apparently even learning to use something as simple as an ATM was too much effort for them.
What makes an object unique then is the specific configuration of the particles that make up that object. This configuration is a form of information.
Fortunately, we already know how to transmit information at the speed of light; no new physics required. This then reduces the problem to transporting the ‘printer’. No generation ship required. You need something that harvests particles locally and can receive a stream of data with what to print. You can bootstrap this, send a tiny particle harvester/printer that can print a slightly larger printer, etc.
Yeah. that's where this system fails. It only stores a single attribute that you wouldn't mind putting on someone else's phone. In the full EU wallet the 'over 18' attribute is part of a larger set of credentials that is basically your entire digital ID. If you were to put that on someone else's phone they would be able to identify as you to numerous government and adjacent services. You'd be a fool to share that.
This whole scheme feels a bit rushed and not thought through.