9,390 karma · joined December 7, 2016
[1] https://yivi.app
I can highly recommend the Azeron Cyro [1] (cannot comment on their other products, but they look interesting). It is partly 3D printed, but also repairable and mod-able. It is the only vertical mouse I am aware of, with a modest amount of keys (15 + scroll wheel + analog thumbstick). I say keys since, well, in software they're recognized as such. You can also make it a Bluetooth mouse (I use USB2BT+), though obviously you suffer a bit from latency.
This is a sensationalist headline (CBA to RTFA). It isn't a case of all or nothing, it is about becoming less dependent. A country like China follows the same industry, and besides, in a globalist economy like ours we are dependant on each other. So, for example, a lot of hardware components come from China, and assembly happens there as well. That counts for EU (DE, FR, ...), US, CA, RU, UA, CN, IN, etc. But as the talk on 39c3 has shown [1]: we can DIY.
[1] https://media.ccc.de/v/39c3-in-house-electronics-manufacturi...
I have been using Linux for nearly 30 years now, including running CS (HL1) via Wine with better performance and stability than Windows 9x on a LAN party. Good times.
Sometimes native ports don't get updates, while Windows port does. If you can then run it via Wine, you may have a more stable/less buggy experience.
Note I use both Wine and Proton. BG3 I run with Proton. But Proton is 'just' a fork with (neat) improvements which also partly got backported.
Oh, and I have to mention, I don't use Arch Linux.
[1] https://en.wikipedia.org/wiki/The_Network_is_the_Computer
I mean, a smell is temporary unpleasant but what happened to my health here? I am a former smoker, so I guess damage was previously done there.
This specific iron is a portable one (I had it hooked up on a powerbank), with temperature control and FOSS firmware. It was lead-free soldering tin with flux included. I held the item with my hands, so maybe it did get greased by skin oil, who knows. I had a lot of help from other more experienced people. They guided me through it, with a lot of patience. Without them, I'd been stuck way before. But even they were like... maybe this isn't for you.
My motor skills are just not that good (possibly related to my ASD or father having MS), and I notice that with everything where I gotta use my hands. From elementary school handwriting (learning to write) or even before with tasks like eating, putting clothes on, etc. That is as far back as I can remember. Ever onwards, things like sports. I am simply physically clumsy, and it requires a lot of effort and practice to get on a decent level. Can I do it? Can I hand write? Yes, I can. But it requires a lot of practice to get to a decent level. I can satisfy my wife with my hands though, probably my most important skill I am grateful for. No joke, btw. Although the fact I can, say, give myself food (eat) is probably more important, survival wise.
The one skill I would love to be able to achieve throughout my life, would be programming, not soldering. I mean, something like soldering is awesome, I am a sucker for right to repair, second hand, reusable hardware, etc something like programming comes close to, say, Lego. Though programming wise I am not sure nowadays, given AI. And there too, I tried VB, TCL, C, Java, Python. Multiple Python courses, too, from MOOC, books, to a professional teacher in a classroom. I've been (and am) able to make small adjustments to code, and do some shell scripting (and mIRC scripting, but that was roughly 30 years ago). That's it. That is without AI, I haven't bothered with that. I like to run LLMs locally.
Well, you see, I quit buying Apple hardware. But I did buy this MBP M1 back in the days. It still serves me well, but now there is an insane US president who'd have no shame whatsoever to pressure Apple into pushing nefarious software (or, say, not fix a security bug or two).
Also, another example. I got a second hand iPad Pro for my pre-teen daughter a couple of years ago. It is still on the original battery. Device still works though. It does not get iOS updates anymore though.
Do you see where this is going? Regarding the latter: I should have root on an EOL product.
I used to always put my bag next to me cause I don't want to sit next to someone (when I was a kid, it'd hurt me when I was solo sitting alone in whole bus, but I learned to embrace that instead). Nowadays, people just point at the bag, and during primetime it is just annoying having to ask (esp someone pretending to sleep, on phone, or lookibg outside) because yes we all don't like the bus is full, we all wanna get to work/home. So I learned to just start with my bag between my legs or on my lap instead. And, since the bag doesn't pay for a ticket, it has no right to a seat.
So in Borderlands 4, one of the voice lines by the Siren called Vex after a kill is 'sorry not sorry'. But given the CEO of that company is Texan, I couldn't pinpoint how rude (if any) that was. Not like they can hear you after a frag anyway.
Some British slang is just lovely. Such as smoking a fag. In that regard, too bad I don't smoke anymore.
But in the instance of sorry, I assumed it was American, since Brits would say 'excuse me'. Brits are, after all, very polite (I'm Dutch...)
In the end, everyone is replaceable. But a king is a bit more difficult to replace, as historically shown.
There's another reason to not allow to/from such countries: malware (e.g. phishing).
But what they do instead is use residential proxies or VPS. And I happen to live in a country where they like to rent such.
I have done whitelisting of IPs. But I have a solid ISP who notice me beforehand when my static IPv4 changes, they also provide IPv6. One admin had DHCP, so he was there whitelisted in a CIDR range (on the jumphost). Which is also why I said you need to consider to whitelist a range. When I had the same ISP in different country (Liberty Global daughter) I had a static IP because my router was (at my request) in bridge mode. What you do in PF is IP lists which can be reused (anchors), and something like OPNsense allows to configure such automatically. You can even use dynamic DNS here, having your admin update it should the need arise. Then you do not need some kind of CIDR range.
The thing with all those scanners though is: they wouldn't get in if OpenSSH ran on 22 and Wireguard on 51820. It just reduces the noise in logs.
There's a very simple method to reduce spam in OpenSSH server logs: whitelist IPs of those who require access (could be ranges, too), and centralize over a jumphost. And something like Shodan (and friends) would find your OpenSSH server running on a different port anyway. But it wouldn't find it if you were using whitelisting of IPs of those who require access. There is, for example, no valid reason that people in China or Russia need to connect to your OpenSSH server. Why allow them to? Don't. I don't allow traffic from any IPs allocated to China or Russia, among a couple of other countries, and I don't feel like I am missing out.
Another one is port knocking. Anyone who has read access over the network between client and server can figure out the port knocking process, including a hostile actor who does a MITM (with for example a rogue WiFi AP).
So what happens is improper security (security through obscurity) means people don't apply real security measures (such as IP whitelisting). And that is why security through obscurity is bad.
As for Wordpress, the default settings and default Wordpress is quite secure these days (have been this way for at least 10 years). It is all the bells and whistles in the form of addons which are the culprit.
Abandoned, but forkable (since FOSS), and a decent idea.
Probably nowadays this gets done in Node, parsing the package search websites. Preferably, this would be done via an API though.
Yes, very funny. When you're done laughing, would you mind reflecting on the fact that neither of those countries have lost their respective war of yet (despite fighting against a nuclear power, both of whom have threatened to use nukes in one way or another?)