522 karma · joined September 4, 2025
We have tested WiFi-7 gear in our lab: from the cheapest TP Omada EAP783 to the latest most expensive Cisco AP+Controller.
Our findings:
- Driver quality from the modems is still below average on Linux. If you want to test Wifi-7 go with the Intel BE200 card - most stuff works there. Warning: this card does not work with AMD CPUs.
- We have seen quite a bit of problems from Qualcomm and Mediatek cards. Either latency issues, weirdo bugs on 6GHz (not showing all SSIDs) or throughput problems
- Always go with the latest kernel with the freshest firmware blobs
- MLO is difficult to get running properly. Very buggy from all sides. Also needs the latest version of wpa_supplicant - otherwise it will not come up. And be aware: there are several MLO modes and not all of them offer "two links for twice the bandwidth".
Also expect to hit problems from AP side. If you read the TP Omada firmware changelogs you see that they are still struggling with a lot of basic functionality. So keep them updated to the latest beta versions too.
I use a Qualcomm QCNCM865 in my privat setup with an AMD CPU. Feels like the latest firmware blobs and kernel drivers brought stability into their components.
If you don't like it.. well it's a free world and every engineer has it own preferences :-)
The bigger ones have PHYs for USB HS, USB-C (5Gbps) and 10/100M Ethernet integrated (!). And their development environment (Mounriver Studio) isn't too bad - I didn't had the immediate urge to port everything to CMake/VSCode.
But they need some kind of pin planning tool. It's awful to use the datasheet and find the correct pin functionalities and their mutual exclusions... STM32 mastered this with their STM32CubeIDE tool: select a feature (like USART1) and the right pins light up - alternate pins are easy to locate.
They also should clean up their license mess on OpenWCH (their GitHub page). Lots (all?) of their HALs are Opensource - but the right version with right SPDX tags are often a bit hidden.
SDP600-25Pa --- I2C ---> ESP32 --- UDP over Wifi --> Linux Host with simple Python recording script
Very rough pin-pointing is possible: plastic kitchen funnel which is attached to the sensor using a short hose.
It's was super easy to measure using a Sensirion Differential Pressure sensor. They have a few extremely sensitive models that have a 100Hz sampling rate (50Hz useable after Nyquist) - also: you can sense washing machines (from vibrating buildings) with it 2 blocks away.
I want to redirect all LLM-crawlers to that site.
Either MLO doesn't work correctly or the drivers of the Modems (we tested Intel, Mediatek, Qualcomm, etc.) hit the shitter.
For my private stuff I stick to Wifi-6 and wait until Wifi-8 arrives. Finally having "friendly coordinated handovers" between APs is one of the biggest wins for me.
You can tow a car with it and then use it to work a festival with Tier 1 bands afterwards without any problems. Most likely it will work even better than before.
Also differential signal nature by design is the standard - It's like CAN. This kills 99% of non-wanted signals coming from the wire physically.
If you want to enter the market you must beat their stuff price/quality wise. That's not easy in 2025.
The entire audio/venue biz is heavily driven by mouth-to-mouth propaganda and personal networks. A friend of mine knows Uli Behringer personally - if one of his mixing console hangs itself during a concert you know who's getting a very angry call at 1:00 o'clock. If people stop losing trust in your stuff nobody will buy the rotten product (or worse entire product series) anymore.
It's the same for the video production scene. It will make you very rich if your product is very good - if it blocks a production or even worse destroys a recording you'll be beaten out of the market with fists. And the people will track your records down if you change your legal name if you are trying to back in.
The scene loves and hates with a lot of passion. And they have a memory like elephants and never forgive.
They need a lot of pins to be toggled. Otherwise they spit out no data.
And a lot of manual stuff means it's super DMA unfriendly. And you need DMA for high-speed stuff.
Only ugly two-chip solutions or hyper exotic stuff with no community.
They are huge step ahead: the upcoming CH32H417 has pretty much all PHYs integrated (!). For 10/100M Ethernet, USB-C 5GBbps and USB HS 480Mbps. That dramatically reduces the components needed to get that stuff running.
I also build a small robot with the ultra cheap CH32V003. That's a full fledged 48MHz microcontroller with 16kb flash and 2kb SRAM. Fun little thing.
If you are used to the ST HAL you will be able to work with them within 10 minutes. Their API style is similar.
That the ADS1115 costs <$1 on LCSC means they buy millions from them every year. They are one of the biggest trustable players in Asia.
I have access to our internal STM32 pricing. You'd be shocked.
Non-linear as hell - and evil side effects once you use the calibration curves.
Another round of OpSec training
Pretty much all GPS/Galileo receivers are able to receive and decode these overlays.