HNHacker News
TopNewBestAskShowJobs

alnwlsn

1,576 karma · joined July 7, 2023

submissionscomments
alnwlsn··on The Helicopter with Radioactive Blades
You must not hang out on there. Those are some pretty standard grade Hackaday comments. I love the site, read every day, but the comments section can be... rough.
alnwlsn··on A Small Telescope That Surprised Me
Not who you're replying to, but I did this just the other day.

First thing to know is what there is even to look at. If you don't know anything, look here:

https://www.heavens-above.com/skychart2.aspx

You'll get a better result if you put in your actual location, but whatever. Looks like Saturn is visible this time of year, and will be in the east around midnight. You can check this right now and it'll be about right for the next few weeks. You can step the time forward and see what how the planets move over time.

If you don't do the above steps, you could probably make a guess, as the planets are the brightest objects in the sky, easily seen by eye.

Then you point your telescope at it. I found mine in the trash and it didn't come with the spotting scope, so I kind of just have to guess where to point it. Use your widest angle lens, and move the scope around until you see something bright go by. You're close! Then you center the bright thing in the center of the view, and after the scope stops shaking because it's on a cheap tripod, you can see a very tiny Saturn, including the rings. Then you swap the lens for a more zoomed in one to see it better. The rotation of the earth means it will quickly drift out of view, so you have to constantly adjust your scope every minute or so to keep it in frame, until I fix the motor that came with my equatorial mount which is supposed to do this part for you.

alnwlsn··on Magic eye tube
I have a couple of these. Of the ones in a working device, they are in capacitor ("condenser") checkers. You rotate a dial until the eye tube goes from closed to open, then read off the capacitance on the dial.

I don't remember the exact design off hand, but I seem to remember that about all that's inside one of these is the eye tube, a rectifier tube, and a handful of resistors and capacitors. Can also test leakage and shorts. They really knew how to get a bunch of things done with about 10 components back then.

alnwlsn··on Since it was stripped of planetary status, Pluto’s defenders have been fighting
This is not insignificant. The period of Pluto's planethood represents just about 0.76% of recorded human history, but that does cover around 7% of the total number of people who have ever lived, about 10x the 'average'. Of course a lot of culture comes out of that. I think the 20th century will be important to historians for a very very long time.
alnwlsn··on RotaryCell: Making an unmodified rotary phone work over LTE with an ESP32-S3
Luckily telephone lines are very current limited. You'd be hard pressed to draw more than 100mA even with a dead short at ring voltages. One zener diode might be all you need.

Also not the most unusual thing I've seen over a RJ11, which includes keyboards, RS-232, other random digital IO and full USB with data. But these are normally on items that are not phones.

alnwlsn··on RotaryCell: Making an unmodified rotary phone work over LTE with an ESP32-S3
In contrast, I've been messing around with some old analog phones and VOIP stuff recently, and I've been blown away with how good the quality is over what I was expecting. The audio bandwidth is low yes (it's G.711u, so 8 KHz), but the actual quality is great, with no hyper-compression artifacts or over-applied background noise filters. And yes this is on the original 60's carbon microphones.

The regular phone calls I normally make on my cell still all sound like they are underwater for some reason, except for those rare times when the better connection is actually working.

alnwlsn··on Transfer files over an Ethernet patch cable
There is always some young person or new to the field learning for the first time. Post like this are exactly how I learned.
alnwlsn··on Aphantasia Beginner's Guide
For those that have this, how is your auditory imagination? I would not describe my thinking as especially visual, but I can hear things. It's much easier for me to imagine the crunch of someone biting an apple than the image of an apple itself. The effect is quite strong - I can hear music almost as well inside my head as actually listening to it; the sound of instruments, pitches (I don't think it's perfect pitch but it's close), the inflection of someone's voice, etc. I had a lot of trouble learning to read music, because it was a lot easier for me to remember what things were supposed to sound like and just play that than to actually read it.
alnwlsn··on Microduck
Old Roombas used to come with a serial port so you could use drive the motors and use it as a robot base. Then, you stick a wireless router and a webcam on top - no raspberry pi in those days.
alnwlsn··on Show HN: I wrote a BASIC interpreter that boots on UEFI machines
That's a shame, I'm quite a bit younger than both of you and this is exactly how I learned to program. When I was a kid, computers were icons and a mouse, with no indication of how they worked or how you would go about making them do whatever you want. But I found a bunch of old BASIC books in my school library; the kind of computer in there had no icons, but very much encouraged you to program it. It took me a while to find one of those computers (but not as hard as it is now, they were literal trash back then), but I was hooked once I did.

Modern tech has a huge barrier to entry if you know nothing about it. I didn't even know what "install a program" was at the time, before soon learning it means "get in trouble" for messing up the (one) family computer.

alnwlsn··on I were 17, I'd learn how to build LLMs from scratch
There are indeed!

Vacuum tube computer: https://www.youtube.com/watch?v=KAlnJnYt5do

Making vacuum tubes in a garage: https://www.youtube.com/watch?v=-UEfqAWb3fE

alnwlsn··on Fixing a bricked Framework laptop
To be fair, I've bought things for more that promised zero support, but at least you know what you're getting into with that. Bad support is just plain bad.
alnwlsn··on Fixing a Bricked Framework Laptop
I like my framework, but I do wonder if the repairability angle is overstated if you're already used to fixing normal laptops. Yes, Framework's parts are easier to find, and the laptops are easier to open, but it's not like doing any of the typical repairs - keyboard, screen, touchpad, battery - are impossibly difficult on those other guys.

Used thinkpads and the glut of EBay parts for them reach about 85% of what Framework does for me, and at half the price. But it's a different experience.

Framework does seem like better build quality than most laptops I've had, but I'm used to cheap crappy ones.

On the other hand, you do seem to find more cases of multiple people doing things like the linked bios update procedure on framework.

alnwlsn··on 2026 Eclipse Webcams
Both myself and my boss took off work to see the last one. Though unplanned it was not, as eclipses can be predicted centuries in advance. I intended to see it before even working there. Looking forward to the next local one in 2045.
alnwlsn··on Recycle – Floppydisks
This is correct. I have bought some disks from him before (also he is tomdotstar on EBay) and they come as ordinary used disks with a new label stuck on top. Supposedly each one is tested; all the ones I got worked and looked to be in good condition, so I guess so. It is interesting to see some of the old labels underneath the new one - most of mine were driver disks or "setup disk 5 of 19" or similar.
alnwlsn··on Recycle – Floppydisks
They do sell, I've bought from them before.
alnwlsn··on Atomic Clocks
In the US, those are radio stations WWVB for clocks and watches, and WWV/WWVH for shortwave.

One thing I think is interesting is that not only are the digital formats these carry synced to an atomic clock, but the radio carrier wave is too. So if you need a very precise 10 MHz signal in the lab, you can hook up a shortwave antenna and a filter, and receive the precisely-on-frequency signal broadcast from WWV.

alnwlsn··on Atomic Clocks
You actually can still call NIST and hear the signal broadcast from WWV[0], though that's probably different from the telephone time of day you're thinking of, which might have come from one of these machines [1] in a local telephone exchange.

[0] https://www.nist.gov/pml/time-and-frequency-division/time-di...

[1] https://en.wikipedia.org/wiki/Audichron

alnwlsn··on Atomic Clocks
If you want to see how an actual application of this works, I've yet to see a description better than in CuriousMarc's HP 5061A series:

https://www.youtube.com/watch?v=eOti3kKWX-c

alnwlsn··on Atomic Clocks
You mean everyone else would have the "wrong" time whereas your clock is still bang-on correct for you. So you have become a time traveler.
alnwlsn··on I added a real-time chat to my blog, people used it to attack me
I've done this to myself too. I once had a thermal receipt printer I wasn't using, so I decided to point a webcam at it and put it on a webpage so anyone could print random crap to it (it's actually still up - alnwlsn.com/printer). Of course I went in knowing full well what I was getting into, and the types of messages posted to it are about what you expect and get here. Some highlights:

- It was once found by one of those worse-than-4chan places, who spent about 4 hours spamming the worst things you could imagine until it ran out of paper. I added some filtering after that to stop tons of duplicate messages from wasting so much paper and some regex, which reduced the volume of some particularly vile things. Some people do post nice messages too.

- The setup breaks often. Eventually, I'll notice and fix it, but it might have been broken for months. Inevitibly, there will be people using it again within days, with no announcement made. How enough people find it on this tiny corner of the internet is a mystery to me, but they do. I am convinced most of them are real people, because why even bother to point a bot at it?

The whole point was that I thought it would be more interesting than letting the thing sit around on a shelf, and to use up the box of rolls that came with it instead of throwing the whole thing in the trash. Intersting it is; I don't think I would describe it as plesant, but it is interesting.

alnwlsn··on Energizing a vacuum-tube flip-flop module from a 1948 IBM system
I think it would have been more likely to be some kind of mechanical analog computer full of gears and cams (which some planes and missiles did use for guidance). Probably needing more support from the ground.

Apollo did carry tubes also, in the radio transmitters.

alnwlsn··on Bubble Memory
I do some retro-computing every now and then and of these old drives that still work (about a 50% chance), when I format them assuming all sectors are good, they will inevitably report the same bad sectors as is on the label.

I don't really know why "bad sectors are still bad after 40 years" is so surprising to me, but there you go.

alnwlsn··on Train Simulator Controller
In many ways this project is more difficult than building a professional train simulator (I've worked on one).

1. Professional customers are willing to pay for (and usually have an in) on getting genuine parts. You usually don't have to worry about scouring ebay for a authentic throttle control lever and hoping one turns up. There is some challenge in interfacing the controls to your system, but you probably don't have to start from scratch. Even if you do, you might be able to access drawings. You might get protocols documented and not have to reverse engineer anything. In our case, we didn't have to make those custom panels, we could just get real ones. Sometimes, you do get nothing though, so you have to have those skills.

2. You aren't building a sim necessarily for how accurate it is to the real vehicle, they are ordering it because they have operators they want to train. So if a LCD screen behind a bezel provides the same training value as interfacing a real gauge, you might well go for a screen. This one varies by customer, but generally they care more about having the correct buttons, switches, anything you touch more than something you look at.

alnwlsn··on Where USB Memory Sticks are Born (2013)
I wonder if they aren't sticking the die to the end of their finger, then using the bamboo stick to poke it off and get it into final position. That's probably how I would attempt it given those materials.
alnwlsn··on Where USB Memory Sticks are Born (2013)
I occasionally do some microsoldering, and I'll reach for a wood toothpick when I need something that's absolutely non-magnetic, soft enough to not scratch things, does not conduct much heat, or is not wetted by solder. At those scales, stainless steel tweezers are quite strong magnets. Sometimes you just need a tiny stick to poke a component off the end of the tweezers.

If you need a stick that's sticky instead, you can wet the end with something - water, flux, hopefully not your own saliva. Then expose it to some heat from the hot air gun, and the liquid will evaporate and unstick the thing you picked up.

alnwlsn··on Gemini Robotics 2 brings whole body intelligence to robots
My cousin has one. But he also lives on 5 acres, which is also not average either.

Apparently prices on them have gone way up. The one he has now would cost something like $6K today.

alnwlsn··on So you want to use plants to reduce CO₂
Here's a real world* example:

https://www.youtube.com/watch?v=AAbyUaLN2QA

*youtuber

alnwlsn··on We discovered a new variant of Super Mario Bros
For an anecdote in a different direction, my father bought a Ford model T a few years ago. Now, "classic" cars of the 60's and 70's are still very popular among those who lived through that time. Maybe your family had one or there was a particular car you wished you could have had. I don't think the model T works like that. Next year, all model T's will be 100 years old, so even if you are 95 today, when you started driving, the newest model T would have been a 20 year old car.

I've been with him to a couple of the local model T club meetings. The demographics are interesting. I was the youngest person there. My dad (late 60's) was the second youngest. But you have to remember that nobody alive, even the real geezers, has experienced a time when a Ford model T wasn't an old car. So by all means, it seems like this hobby should have died out decades ago, even as it continues to die out today. Very strange.

As it stands, it looks like a decent condition Model T can be bought these days for 10-20K, only a bit more than the inflation-adjusted original price. But, I don't really know what the collectors market was like at peak nostalgia.

alnwlsn··on I wanted a clock that never needed setting. Things escalated
The shortwave WWV, not so much, except to check if your shortwave radio is working. Canada's shortwave CHU was shut down last month.

The 60 kHz WWVB, yes. Plenty of cheap wall clocks have "atomic time" as it is marketed over here, meaning it has a radio receiver. You can pick one up at the grocery store. It depends on where you live if it actually works though. Where I live it works pretty well, but I've heard it does not work so well if you live on the east coast. That's quite a ways from Colorado.

← PreviousPage 2 of 17Next →