HNHacker News
TopNewBestAskShowJobs

alnwlsn

1,576 karma · joined July 7, 2023

submissionscomments
alnwlsn··on Retro-Tech Parenting
Technically I learned the drag and drop Lego Mindtorms first. Don't know what kind of habit forming research there is about that.

Any of them are a big step from "computer is just for MS PAINT" to "wow, it actually did something I told it to".

By the time I got to the Z80 stuff I had abandoned basic (though learning C from Arduino is also something people tend not to recommend). Once I learned some Z80 assembly and I encountered BASIC again, I was struck by how similar assembly language and BASIC are, specifically the setting variables and then jumping around all the time part. They taught this stuff to kids!

alnwlsn··on Retro-Tech Parenting
It's a different category, but I can't tell you how much learning programming in BASIC and learning hardware on Z80 got me to understand how computers actually work.

BASIC is just plain approachable - turn on the computer and it's there. Also I had the paper manuals manuals that came with the computer and all the old BASIC books that my school library never threw away to learn from. When you're young enough that "install software" or "download" look like scary words that will get you in trouble for "messing up the computer", an old computer with BASIC (which your parents wanted to throw away anyways) is fair game to explore. More of a thing when households only had one main computer, I suppose.

By the time I was old enough to start learning hardware, the Arduino had already come out. I learned some things on that, but as soon as you have to go below all the abstractions it does for you things get cryptic. I actually didn't get into Z80 stuff until a few years later, but only after that did I actually feel I understood what was going on with the Arduino. Being able to poke at things with a scope which aren't embedded inside a tiny plastic brick goes a long way.

alnwlsn··on ESP32-S31
Haha, that I did! I spent a good while narrowing down that very list to pick one of my first ones out last year. By coincidence, I ran into the very same part number in a completely different circumstance a few months later. What are the chances of that!? Did help me feel that I hadn't picked out a real oddball one though.

Part number was still just 15 characters, and that's enough to specify if you want the tape and reel version. Not that anyone's counting :).

I guess those long part numbers do get burned into your head after a while after all.

alnwlsn··on ESP32-S31
Lots of assumptions off a comment that is mostly just me stating my preference for short and unique part numbers. Nothing would be wrong with ESP32xx ESP33xx, ESP34xx, etc.

Espressif only have 312 SKUs [0]. You're telling me nobody could come up with a naming scheme where more than 2/3 of them don't have part numbers longer than 18 characters?

Doesn't really matter either way, but short part numbers do fit nicely in a BOM table without using really wide columns. (even though I usually find capacitors to have even longer names).

0 - https://products.espressif.com/#/product-selector

alnwlsn··on New Texas Instruments 5532 chips are not the 5532s we’ve used for decades
Funnily enough, E-Meters are known to be made with fairly high quality components.

https://hackaday.com/2018/07/19/whats-inside-a-scientology-e...

I guess if you have tons of cash rolling in, you might as well commit to it.

alnwlsn··on ESP32-S31
You need a transceiver chip which then hooks up to the Ethernet jack.

Usually have to do this for any interface when the signals don't come in right at logic level, like CAN, RS-485...

although it's not always exactly 'just' logic level conversion.

alnwlsn··on ESP32-S31
I kind of wish these all weren't called ESP32. ESP8266 and ESP8285 -> ESP32 made sense, but now we have 10+ different versions with different features and different architectures.

Kind of like how in every thread involving a Raspberry Pi Pico (RP2030/RP2350), there's always someone confusing it with the single board computer version.

The ESP32 (Classic, usually WROOM-32E) is still usually what comes to mind when I hear ESP32.

alnwlsn··on Apple rejected my dictation app for using the accessibility API
I have family that would gladly use FacebookOS if such a thing existed and automatically loaded that and only that website as soon as you turn on the computer or phone.
alnwlsn··on Version 2.0 of AI laser mosquito defense system is here
There isn't a lot of equipment that scares me, but eye-permanent-blinding lasers through open air is one of them.

It seems like this device could be made safer by replacing the laser with a loaded gun, because generally, you'll be OK as long as the barrel is pointed away from you. Lasers can effortlessly reflect off of any shiny enough object in their path and still remain dangerous.

alnwlsn··on Seven Ways to Avoid Losing Your Job to AI
That second one has been tried numerous times, the first being 60 years ago:

https://hackaday.com/2015/06/09/retrotechtacular-automatic-f...

We're still waiting.

alnwlsn··on I'm Getting into Mesh Networks (Meshtastic, MeshCore, and Reticulum)
I don't know man, I was just trying to follow the official build instructions. If that's not Meshtastic I don't know what is.

The (lack of) reliability in the network is the main issue with it though, but that's already been covered elsewhere in this thread.

alnwlsn··on Can we have the day off?
https://en.wikipedia.org/wiki/Cotton_gin

>This inadvertently led to an increase in the use of slaves. Whitney had hoped his invention would do the opposite by reducing the amount of labor needed to process cotton, but he never invented a machine to harvest cotton. That job still had to be done by hand. Cotton harvesting machines did not show up until the 1930s. So as cotton farmers expanded their plantations, they bought more slaves to pick the cotton.

alnwlsn··on I'm Getting into Mesh Networks (Meshtastic, MeshCore, and Reticulum)
It's pretty hard to imagine anyone "getting serious" with these tiny radios designed for reading gas meters and weather stations and using that to build some kind of off-grid alternate Internet.

I'd almost have more faith on dragging out all the old acoustic coupler modems and building a city-wide string-and-tin-can telephone network.

Of course they are not useless. My hiking/camping friends put together a fun orienteering game which used Meshtastic to do live GPS tracking. Worked great for that. But a country spanning meshternet it is not.

I don't think it needs to be though. There are plenty of things to explore using these things at the local 1-10 km scale.

To be fair it is already a miracle that there is enough Metastatic in my area that I can (sometimes/rarely) send a message between my home and work!

*disclaimer that I am coming off a recent disillusionment with Meshtastic. I thought it would be fun to make a single raspberry pi image with all the dev tools on it to do some off-grid dev/maintenance work if you were to treat this seriously and pretend the main internet is down. That moment came when I tried to compile something and the Pi ran out of memory. Really? I need more than 1GB RAM to compile something used to send short text messages?! That's nuts!

alnwlsn··on I'm Tired of Talking to AI
Now you know why AI text to CAD works so poorly.
alnwlsn··on Canada's shortwave radio time standard station CHU to go dark June 22nd
This is a project I have seen a number of times, where people make a low power transmitter to set their WWVB wall clocks and watches which don't get a reliable signal.
alnwlsn··on Canada's shortwave radio time standard station CHU to go dark June 22nd
That's a shame. CHU is usually the first thing I look for when I turn on my shortwave radios (which I guess isn't all that often). Usually comes in a lot better than WWV in my area.
alnwlsn··on CBS Radio signs off after nearly 100 years of broadcasting
Work without internet infrastructure
alnwlsn··on Antigravity 2.0 Tops the OpenSCAD Architectural 3D LLM Benchmark
Using reference images is a huge step for this sort of thing. The text-only approaches I've seen before were never going to be that good even with "perfect" AI, simply because describing 3D objects in text is not something that anyone is really any good at.
alnwlsn··on Antigravity 2.0 Tops the OpenSCAD Architectural 3D LLM Benchmark
The normal people are the ones not writing comments, but I'll give you one 'cause you asked:

I'm a Solidworks user. Most Solidworks or other pro CAD users would consider OpenSCAD kind of like MS Paint. Yes, you can draw the Mona Lisa in it, but it doesn't really work the same way.

Even so, the examples shown here are better than what I've seen before. They seem to be on the right track using images instead of long paragraphs of text to try to describe the object. They are still missing the constraints and dimensions that come naturally to pro cad users (it can be done manually in openscad of course), but if you're just making a video game it's probably going to be fine for that.

alnwlsn··on 1-Wire
If you are much into Arduino type things you will come across 1-wire as one of the most popular temperature sensors is a DS18B20.

The only place I've run across it in the wild is inside an SGI Octane. I thought it was a battery to replace, but it was actually a "Number in a Can" iButton. It's a read only memory that contains the MAC address and some other stuff. Software gets licensed to this ROM, so if your system breaks you can take the iButton out and move it to the replacement.

alnwlsn··on Earth is now heating up twice as fast as in previous decades
That's why it has to come by taxi.
alnwlsn··on Tracking Starbucks' 'widely recyclable' cups: none ended up at recycling
Also celluloid (made from cellulose), which I was pretty surprised to learn is about 170 years old. Plastics from oil were mostly invented after WWI and took off during WWII, but they had some kinds before that.
alnwlsn··on VoIP brings back old-fashioned pay phones to rural Vermont (2025)
Do TV lawyers, roofing installers, or carpet stores count?
alnwlsn··on Where to buy a non-Apple, non-Google smartphone
If a phone can make calls, send texts, read emails, and take pictures it already covers 98% of my use cases.
alnwlsn··on Testing UPS Output Waveforms
I discovered the same thing a few months ago with my home's furnace (which was a bit of a shock, because one reason for picking natural gas is so you can still have heat when the power is out). It runs just fine on a pure sine wave inverter though.
alnwlsn··on Bambu Lab is abusing the open source social contract
>Someone who has their dealership do the oil changes on their leased BMW does not care.

We wouldn't really care either, but alas, there is no 3D printer dealership service center (unless you count 1 month round trip to ship it back).

I'd argue that my workplace who bought the H2D is exactly Bambu's target market. Most of us have personal printers we tinker with, but for work projects we need something that is mostly hit print and wait. We aren't really running a print farm, but we do a lot of iterations and make prototypes constantly. This is what the H2D was purchased for (specifically, the heated enclosure to better print ASA parts). Being hard to repair isn't really a problem, it's that it broke at all. And after it does break, changing a fan or clearing a jam should not be overhaul grade maintenance.

We also have a couple of P1Ss that are very solid, the one H2D has all the problems.

alnwlsn··on Bambu Lab is abusing the open source social contract
If you decide to get a Bambu anyway, let me heartily recommend against an H2D.

It did "just work" for a while, but then the print cooling fan went bad. On my home Voron, this would be a 5 minute fix. On the H2D, it is this [0]. You basically have to take the entire toolhead apart, removing the mainboard inside it with no less than 11 very tiny and fragile custom ribbon cables that connect to it, plus 5 more connections on a second board that goes on top of it. Most minor fixes are like this. Another time, I had to remove a stuck piece of filament, which involved taking apart the whole front of the toolhead and dealing with even smaller and more fragile flex PCBs.

[0] https://wiki.bambulab.com/en/h2/maintenance/replace-cooling-...

alnwlsn··on I hate soldering
My region has the Japan voltage version on Amazon for $210.

https://www.amazon.com/Hakko-FR-301-Desoldering-Tool/dp/B07B...

I think the one I had was the ZD-917, which I don't even think anyone makes anymore. Assuming the ZD-8965 made some material improvements, it looks like it has the same style of reservoir with the internal spring, which is one of the main issues I had with it. I found that the spring would become eventually become trapped inside a large solder blob, making cleaning difficult. Then, you have to line up the filter and keep everything together while reinstalling it. For whatever reason, the tolerancing on mine made this especially difficult, and I eventually broke the glass tube when trying to reinstall it (replaced with an aluminium tube). Hakko version has no internal spring, and has enough tolerance to easily remove the reservoir.

The rubber grommet on the front also eventually lost its grip around the small brass tube that comes out from the iron, so it would leak and not suck as hard. The hakko version presses its grommet against a flat plate instead, so that doesn't happen.

Still, both are much better than the "squeeze bulb" style desoldering iron I had before them.

alnwlsn··on I hate soldering
The real trick is that it's a skill that you practice and get better at. I was able to do this

https://hackaday.io/project/197868-sub-surface-simon

using no magnification, and only cheap soldering tools.

You can and should be able to solder SMD with only an iron and tweezers. Not everything; not the smallest stuff, but you don't start there. My sweet spot is 0805 or 0603 size components and 1.27mm pitch SOIC parts, which I actually find easier to solder than through hole, because you never have to flip the board over.

My recommendations for most useful tools are a Pinecil, a few packs of cheap flush cutters from Amazon (even expensive ones get dull or break), a cheap pair of sharp tweezers [1], and a tube of flux [2]. You don't always need extra flux if using flux-core solder, but enough flux can turn even the crappiest solder joints into good ones.

Most of the rest of the skill comes from being able to brace your hands against things to get fine control, while being far enough away to not burn yourself.

Magnification unfortunately comes down to how good your eyes are. If you can see your fingerprints clearly at arm's length, your vision is already good enough. If not, no big deal, get a cheap microscope like this one first [3], or a loupe, or some strong reading glasses, or one of those headband visor things with lenses in them.

[1] https://www.digikey.com/en/products/detail/seeed-technology-...

[2] https://www.digikey.com/en/products/detail/chip-quik-inc/SMD...

[3] https://www.amazon.com/dp/B07QB79SN

alnwlsn··on I hate soldering
There isn't much advantage to even learning on lead in my opinion, unless your only goal is to work on old stuff that used leaded solder.

Any modern or new stuff (i.e. the smallest components) has the whole supply chain designed around lead-free. Lead free boards, using lead free chips, which are meant to take the heating profiles for lead free solder. If working in industry, you'll need to learn lead free eventually, so you had better do it from the beginning.

I save my leaded solder for old radios and retrocomputing, but as I would rather not spread lead dust around my work area, I only ever use lead-free solder paste for modern work.

Leaded work is easier, a little, but not so much so that I wouldn't consider not learning lead-free.

← PreviousPage 4 of 17Next →