Only at the surface.
957 karma · joined June 14, 2021
Only at the surface.
"Grade 4.7 (4.7 helium = 99.997% purity) A “Grade-A” industrial helium, 99.997% helium is mostly used in cryogenic applications and for pressurizing and purging, but is also used as a control atmosphere in manufacturing, as a cover gas during welding, in breathing mixtures for divers, and leak detection."
"Grade 4.5 (4.5 helium = 99.995% purity) Often the grade most commonly referred to when people say “industrial grade,” 99.995% helium is most commonly used in the balloon industry, but is also used as a push gas in MRI applications.
Grade 4 (4.0 helium and lower = 99.99% purity) Any helium that is 99.99% and down into the high 80 percents is within the range of purities referred to collectively as “balloon grade helium.” While Grade 4 helium is used mostly for balloons (although the mid-high 90 percent heliums could be used in leak detection, air bags, and heat transfer applications as well), that doesn’t necessarily mean that higher grades of helium aren’t used in balloons. In fact, in many cases, it may be Grade 5 helium."
Alas, we don't hear that narrative because it's only bad when Europeans do it.
When I first moved to Singapore, I was surprised by the use of corn kernels in desserts like cendol. Corn is actually relatively sweet but I had never realized it until being out of the US for a few years.
You've interpreted their hand wavey marketing statement far too literally. Of course a plain vanilla bluetooth hardware + software stack won't be able to communicate with a satellite. They are saying that you can run their protocol on standard bluetooth chipsets for people who are designing NEW products. Loading a custom protocol onto an already certified product would nullify its certification. Why do we have to mention this here ?
You can do firmware updates on bluetooth chipsets, say for example Silicon Labs EFR32, to have a custom 2.4 ghz protocol. Wirepas is an example of a proprietary protocol that runs on 802.15.4 SoCs.
If you're expecting modest or radical changes (with presumably big boosts in efficiency, performance, etc.), why build a long life span product? In a rapidly changing environment, keeping old equipment can be detrimental. Servers can last longer than what they are rated for. Depending on SKU, Intel CPUs are rated for 3, 5, or even 10 years of use, however, servers are refreshed/replaced because of the ongoing performance increases per unit electrical consumption from newer CPU SKUs. In businesses where IT equipment isn't core to the business, old equipment is kept around if IT efficiency isn't really a concern, there's a very high cost of re-engineering, or re-certifying a system.
If changes are not reasonably expected, then build products that last a long time. One of my children will inherit my kitchenaid blender.
I've worked in product management for the past 10ish years, predominately working on products that are a combination of hardware + software, hardware that's connected to the cloud. SaaS and ecommerce product management is written about to death while I've struggled with finding hardware product management content (I still do) which is quite isolating. The closest thing I've been able to find is Industrial Design content.
Books:
Build by Tony Faddell (not really an ID book, but talks about building physical products and businesses)
Some of the people I follow on Linkedin:
https://www.linkedin.com/in/ansondotdesign/
https://www.linkedin.com/feed/update/urn:li:activity:7168968...
There's a pretty good video of a guy who drove a GPIO pin off of a microcontroller and successfully sent data via LoRA without a dedicated radio chipset or antenna.
A Howitzer itself ranges from $2m - 3.7m USD each.
Allowing people to save face is important, both for CEO and investors (VC funds have LPs to answer to). Also, seeing a company in a news-making hostile turnover / CEO blowup may be a big turn off for existing and prospective customers.
Where's the board been and what's their take on the situation? How much equity does the CEO own?
I felt that Fusion was limited with the textures and materials available for rendering. I think Fusion is good enough for internal purposes but I want better looking renders for external uses.
I've worked on scrappy product teams that lacked a dedicated industrial designer. Usually, the mechanical engineer on the team would come up with a design and I'd come up with simple renderings for marketing docs, show investors, etc.
Most of the industrial designers I follow on linkedin all use Blender, I hadn't even considered Unity, I'll check it out.
I'm now looking at going down the Blender / render rabbit hole as Fusion can only get you so far.
The modular approach makes a small hardware manufacturer's life much easier. Manufacturing 10 (just throwing a number out there) hardware product SKUs means you've got to maintain different bills of materials, test jigs, firmware, etc.
With a module, you can engineer a module once and sell it many times over. One BoM, one test jig set up, fewer versions of firmware to maintain, etc.
You'll find computer on module type systems in a lot of appliances, pieces of large machinery, etc. Situations where you have low to medium volume where it doesn't make sense to design and manufacture a motherboard from the ground up, but you have specific needs for features and IO.
That sounds like a win for the consumer
>This squeezes the advantage smaller players may have on pricing
Small players competing on price alone with Walmart or Amazon is suicidal. Offering something other than low price is a way to compete.
Came here to say this. I lived in SG for 14 years, we had the "mosquito police" show up to our office (shophouse in Emerald hill) and do an inspection.
If you're getting mosquitoes in your place, you can call the NEA and they'll send people out looking for the source.
Grass is mowed religiously in Singapore to help keep the mosquitoes under control and there's always a ton of spraying. During COVID lockdowns, a lot of the lawn guys were stuck in the dormitories so the grass got tall. Also, the coconut palms went untrimmed. The morning walks became fraught with danger as the palms were overloaded with coconuts and were consistently falling onto the footpaths. I know COVID sucked for a lot of people, but I find a weird sense of nostalgia for that time.
external disks
dongles
card readers
telephone systems
barcode scanners
medical devices
mobile gauges
output devices
audio/video streaming devices
scanners etc.
...connecting a computer to a USB device that is further away than what USB is physically limited to (distance wise).