HNHacker News
TopNewBestAskShowJobs

femto

7,665 karma · joined August 4, 2011

submissionscomments
femto··on And then the men with guns tell you to do it anyway
The closest we have to a "neutral rule" is "The Golden Rule":

"Treat others as you would like them to treat you."

It has a long history, both secular and religious. Pretty well everything flows from it, and if someone is doing "the wrong thing" whilst claiming to obey it then they are probably deluding themself.

The rule is suited to enforcement, since if someone does something "wrong", rather than immediately attacking them you can reasonably ask "Would you like it if I did this to you?". Limitation of power is built in.

https://en.wikipedia.org/wiki/Golden_Rule

femto··on Making holograms with a pen plotter
The disk is part of a larger Scanning Tunneling Microscope project.

https://john-alexander42.github.io/simple-stm-web-page/Proje...

Alexander's results show a movement range of 1.25um, 10 times smaller than the 12.5um step of your system, so in its current form it wouldn't be suitable for interpolating motor steps.

Also potentially interesting is Alexander's "cut-and-pull" technique for making scanning tips with a single atom at the point. I can't find the original reference, but here's a description:

https://www.nanophys.kth.se/nanolab/afm/icon/bruker-help/Con...

The single atom would likely immediately wear down if used for scribing, but even if it wore down to multiple atoms wide it might still produce a very narrow line? I wonder what the effects of using an STM on a photosensitive plate would be, whether the strong electric field at the tip would lead to very narrow photographic lines?

femto··on Making holograms with a pen plotter
It would be interesting to augment the plotter with a Unimorph piezoelectric disk scanner [1], to enable finer movement so lines can be drawn closer together.

[1] https://john-alexander42.github.io/simple-stm-web-page/Disk_...

femto··on Publishing Schematics Before “Open Source” Was a Word
Most electrical/electronic items (radios, TVs, washing machines, ...) used to come with a schematic, or at least a block diagram, inside the device. Similarly, published integrated circuit data sheets contained enough information to understand how the chip worked to a low-level. This changed around the 80s from memory? There wasn't a word for "open source" in electronics, as it was just the unnamed default. It was all paper based, as it predated wide-spread online distribution.
femto··on A 'bananas' order for 5000 obscure book titles fuels suspicion
Perhaps Anna's Archive will be the last bastion of some books, especially if they manage to acquire the internal collections of some of the AI companies, à la Spotify. (ie. the parts of the collections that didn't come from Anna in the first place.)
femto··on A 'bananas' order for 5000 obscure book titles fuels suspicion
As long as the AI devouring a book isn't making it harder for a person to get access to a copy of the book. There might not be many copies of some out-of-print books.
femto··on São Paulo resident transforms degraded area into urban forest
The battle for Wendy's garden will pale into insignificance compared to the battle for a "Sydney Harbour High Line".

https://www.sydneyharbourhighline.org.au/

In 2023 the NSW government committed to turn the adjacent harbourfront railway line into a public linear park. The next government shredded the agreement and has announced it wants housing everywhere. IMO it's prime land that is too valuable to be privately owned and should be publicly accessible. Anyone who disagrees should go for a harbourfront walk on a sunny afternoon. (Billionaires who's takeaway from the experience would be to buy the land for their own use don't count.)

The same battle played out in Cremorne in the 1890's. Today the park is one of Sydney's jewels.

https://www.bonditomanly.com/bondi-to-manly-walk-blog/2020/1...

femto··on Hackers Stalked Me by Hijacking a Smartwatch for Kids
> made by an equally obscure manufacturer, YiQingTeng Electronics, in Shenzhen, China.

Is this what is meant by "Shenzhen Speed"? Dump all safeguards and get any piece of crap out the door as soon as possible? This comment isn't directed specifically at Shenzhen, as other parts of the world do the same thing and call it "Move fast and break things."

Dropping engineering standards may increase short term profits, but it erodes people's trust in the world around them when everything "sort of works".

There's an argument that this low level continuous corrosion does more long-term damage than obvious safety flaws that are serious enough to prompt corrective action.

femto··on São Paulo resident transforms degraded area into urban forest
A similar story to Wendy's Secret Garden in Sydney, Australia?

https://www.wendyssecretgarden.org.au/

After her husband's death in 1992, Wendy Whiteley took to cleaning up an unused railway easement behind her house. It turned into a substantial garden. The railways refused to guarantee its future (it was on their land), but in 2015 it became an official park. Well worth a visit on a sunny afternoon if you are in Sydney.

femto··on Show HN: SIMD Viterbi Decoder in Rust
Nice! Thanks too for putting the work into this library.
femto··on Show HN: SIMD Viterbi Decoder in Rust
I got caught out by my Australianism!

"How do you find the speed of the Rust version of your FEC vs, the C version?"

translates from "Australian" to "English" as:

"What is the speed of the Rust version of your FEC vs, the C version?

Though it was interesting to know how you do it. I'm interested in the speed, as I once looked into using Rust for a signal processing project, but ultimately went with C++ because the team wasn't familiar with Rust. At the time, it seemed to me that Rust had the potential to go faster.

femto··on Show HN: SIMD Viterbi Decoder in Rust
How do you find the speed of the Rust version of your FEC vs, the C version?
femto··on BMW Spider-Man in-car advertising
I'm beginning to think that my '96 Toyota Starlet is "peak ICE". It has EFI, no infotainment, no power windows, no power steering, no automatic transmission. It is basically an engine, gearbox and wheels. An electric Starlet would be Nirvana.

Edit: Just read that Toyota is toying with the idea of an electric Starlet. It'll probably have an infotainment system and power "everything" though.

https://www.drive.com.au/news/2026-toyota-starlet-rumours/

femto··on Twenty-five years ago it was cryptography, today it's model weights
MMR vaccines would be a net positive to the US economy, to the tune of $3.5B in direct savings (14x benefit/cost) and $7.6 billion (26x benefit/cost) in wider societal benefits [1]. Those are 2004 figures, so the dollar amount savings would be even bigger now.

To a point made further up the chain: The US's woes aren't driven by AI investment, but the self-interest of a select group. Compare it to a thief who causes $20,000 damage to steal a $100 stereo from a car.

[1] https://pubmed.ncbi.nlm.nih.gov/15106102/

femto··on Read this before you buy that TV streaming stick
A big chunk of that 72% are legitimately labeled "Made in China" or niche brands. The brands that failed, plus the products that are actually labeled "Made in China", dominate Australia's four supermarkets with the majority of the market share. I've just done my weekly shop, so trawled their web sites looking for alternatives.

Summarising the Australian situation, taking the 4corners results into account, the following non-Chinese tomato pastes are available:

Coles (29% market share): 1 x 140g premium product in a tube (expensive with reduced market share) out of about 20 products.

Woolworths (38% market share): 1 x 140g premium product (Mutti) in a tube (expensive with reduced market share) out of about 20 products.

Aldi (10% market share): None out of about 4 products

IGA (7% market share): 5 of 16 products, being the same premium brands that Coles and Woolworths sell.

Maybe qualify my comment with "by market share and availability". The effect is that if you stand in front of an Australian supermarket shelf, every product, bar one or two in the corner, come from China. China is a proxy for Xianjing, in that sources say 80%-90% of tomato paste from China comes from Xinjiang.

Hence the assertion I made.

Market share data: https://www.accc.gov.au/system/files/supermarkets-inquiry_1....

Xianjing percentages: https://tomatonews.com/countries/china/

femto··on Read this before you buy that TV streaming stick
It's about trust.
femto··on Read this before you buy that TV streaming stick
Thanks for that informative link. I looked to see if there was any data beyond the ABC article and didn't find it. Some of the truthful brands listed in the BBC article are available where I live. Kudos to the US that their labels match their contents.
femto··on Read this before you buy that TV streaming stick
Check their tomato paste. It turns out that nearly every tomato paste in Australia comes from Xinjiang in China, including those marked as Australian or Italian. Simplot (Leggos), the big US company, was the worst offender, so it's possible that tomato paste in Costco's US stores has been produced in Xinjiang using slave labour, irrespective of what the label says.

https://www.abc.net.au/news/2026-07-27/australian-tomatoes-l...

femto··on A Trampoline
Best I heard was someone who taught their "friend's" young child to screech like a cockatoo [1]. You can take a drum kit away, but you can't take a cockatoo screech away. The recording doesn't give true justice to the volume.

[1] https://www.youtube.com/watch?v=GAJ75uECWHw

femto··on Schools are adding pepper-spraying drones to help combat active shooters
Okay. I should have interpreted it to mean "So clearly that isn't the full answer". I interpreted it to mean "So clearly that isn't part of the answer".

I think reducing the "saturation" of guns is important, as it is a big driver of people's mindset, whereby they see a gun as an answer. By "saturation, I mean the number owned, their availability, their visibility, their promotion and so on. The US is a standout in ownership, in that it has almost twice as many civilian firearms per person than the next closest country [1]. I suspect the US is also a standout in the other areas: availability (Walmart, but less than before), visibility (open carry), promotion (NRA).

[1] https://en.wikipedia.org/wiki/Estimated_number_of_civilian_g...

femto··on Schools are adding pepper-spraying drones to help combat active shooters
> So clearly that isn't the answer.

Quite an assertion.

What Australia is doing works by one measure that matters: number of people killed by a gun. In 2024 the gun murder rates were:

US: 4.5 per 100,000

AU: 0.09 per 100,000

Ratio: 50

Source: https://www.ussc.edu.au/by-the-numbers-stark-contrast-in-aus...

Australia didn't confiscate vast numbers of guns by violence. It introduced a buyback scheme, which a lot of gun owners took up. The buyback was "an offer they couldn't refuse" for classes of firearms that were banned, but once it was done it meant it was more tractable to keep firearms in check. The big thing is did was reduce the number of households that contained a firearm even if some of the remaining (paranoid?) license holders increased their number of guns.

Source: https://www.sydney.edu.au/news-opinion/news/2021/04/28/new-g...

femto··on A missing underscore sent innocent man to prison for 18 months
Probably no compensation. Under "English" law (Canada is a Commonwealth country), the wrongful conviction will probably to taken to be without malice and reasonable given the information the US provided, so tough luck.

He might be able to negotiate an ex gratia payment, but this will be entirely at the whim of a politician, who will be looking to avoid being criticised for giving away government money

femto··on My USB Drive Has a Hidden Encrypted Vault
A complete USB voltmeter/ammeter costs $1.

https://www.alibaba.com/product-detail/MX17-Current-and-Volt...

Ignore the case and connector, on the basis that the circuit will be integrated into a larger scanner, and the cost will be substantially less. Most USB controllers already monitor current, so even the <$1 circuit probably would not be needed. The main cost would be the manufacturer putting together a database of power consumption figures to allow a pass/fail test.

Law enforcement, airports and so on already boxes to scan USB devices. They don't use them for every USB drive, just those that they decide they have cause to scan.

femto··on My USB Drive Has a Hidden Encrypted Vault
If I was building a black box to detect hidden data on a USB stick, I'd include a feature whereby it measures power consumption and flags USB drives that don't consume the expected power for that type of drive.
femto··on I started a “dirt notebook”
Conventional wisdom is to use a bound notebook, as a court will discount reliability if pages can be removed without leaving a trace.
femto··on A graph that should be front-page news
Where I live, it was front page news four weeks ago.

https://www.abc.net.au/news/2026-06-16/nsw-bureau-of-meterol...

Not that it lead to any particular action or recognition.

femto··on Why are US consumers so angry? It's not just high prices
Online retailers are also responsible under the law, as the laws apply to all retailers.

In practical terms, if it's an online business with no Australian presence it makes it hard to apply the law. Overseas online companies with an Australian presence, such as Amazon, have been successfully prosecuted [1,2,3]. The ACCC is still working through responsibility for third-party sellers, but it seems to be the case that if it is fulfilled by Amazon then it is responsible.

[1] https://www.accc.gov.au/media-release/amazon-in-court-for-in...

[2] https://www.abc.net.au/news/2026-05-29/accc-sues-amazon-butt...

[3] https://www.accc.gov.au/media-release/accc-issues-takedown-r...

[4] https://www.choice.com.au/shopping/consumer-rights-and-advic...

femto··on Why are US consumers so angry? It's not just high prices
I'd encourage Australians not to muck around in this regard. Fair Trading gives explicit instructions:

1) Contact the organisation

2) Suggest a resolution

3) give them a reasonable time to respond (ie. not forever)

4) Be polite

5) Lodge a complaint with Fair Trading

The more people that do this, the less sellers will try to do people over.

https://www.nsw.gov.au/legal-and-justice/consumer-rights-and...

femto··on I think I have LLM burnout
If an LLM was a person, it would be known as a "bullshit artist". I've worked with bullshit artists (people) before, and its exhausting trying to separate fact from fiction. It's a reason to avoid working with such people.

A good coworker will admit not knowing something, or if unsure give their best guess but discuss its limitations and why they might be wrong.

Question: Has anyone experimented with using voice to directly prompt an LLM, without doing speech-to-text? If an LLM can pick up on the skeptical nuances in a person's response, it might be prompted not to be overconfident in its subsequent output.

femto··on StreetComplete: Fixing OpenStreetMap, one tiny quest at a time
I did something like that for my local area (in about 2012). It turned into a hobby, whereby I spent a couple of years on foot exploring the local bush in minute detail and used OSM to document what I found. There are features on OSM that exist on no other map, especially off-road. I know other people do this too, as similar obscure tracks have appeared in neighbouring areas.

I've been on a number of orienteering or rogaining events where the maps look familiar, and it turns out they have used my OSM data. It's been great to see something lasting come from that mapping effort. (It's also a nice bonus in such events to be that familiar with the map and its covered area!) I suspect some local bush fire brigade members might also be looking at OSM, as a number of the fire trails I mapped seem to have had names added.

← PreviousPage 2 of 34Next →