HNHacker News
TopNewBestAskShowJobs

iamchrisle

246 karma · joined September 25, 2011

submissionscomments
iamchrisle··on 25-GPU cluster cracks every standard Windows password in less than 6 hours
Nice. But can it run Crysis?
iamchrisle··on Google Analytics for developers
+1000 I'll tend to look at the speed coming off the server instead. At least I know that I can control 100%. If the user is on a dial up modem, not my problem ;)
iamchrisle··on Google Analytics for developers
In my experience Google's measures are 1-2 seconds higher than what I personally experience. Not sure why. Take it with a grain of salt and look for trends.

Googlebot seems to give up crawling your site after about 14 seconds :) You might see that reported in GWT.

iamchrisle··on Google Analytics for developers
This is awesome. Thanks!!
iamchrisle··on Google Analytics for developers
No.

There are two things here. Sampling rate for calculating page timing and using sampled data when generating reports. Confusingly, they are two different things with the same word "sample."

Sampling rate only affects calculating page timing because it's client side and slows down the client. (http://support.google.com/analytics/bin/answer.py?hl=en&...)

Google Analytics will collect all the unfiltered data for the web property. (http://support.google.com/analytics/bin/answer.py?hl=en&...)

However, to speed up ad-hoc querying, like when you create a custom report, it will limit the amount of data it will fetch to generate that report in order to make the user interface faster.

You can increase/decrease that using the slider. YOu will only see the slider after something like 250k unique pageviews.

Google Analytics Premium increases the number. If you really want to get a better sense of page timing, you should look both at the client side timing and the server side timing together. All you can really control is stuff going out. You can't help it if the user is running a netbook with 512 megs of RAM :)

iamchrisle··on Google Analytics for developers
Very good point! Just be careful...

- Google will take a lot longer to report your data if you do this. - Google also has data limits. If you're experiencing 10k+ pageviews a day, you will probably run into the limit and it will stop reporting stuff.

http://support.google.com/analytics/bin/answer.py?hl=en&...

iamchrisle··on Google Analytics for developers
_trackPageLoadTime is deprecated. It's already enabled by default, so you don't need that line.

Place this stuff in the head tag rather than the bottom. It's async code and placing it closer to the top you can make sure you're setting up tracking the page as soon as possible.

iamchrisle··on Google Analytics for developers
Generally you should be paying attention to trends, not individual users. Either way:

Landing pages: Go to Content > Site Content > Landing Pages

What you probably want is to create an advanced segment: Landing page = something. You can use regex or an exact match term.

Then go to audience > visitor flow, select the advanced segment you used and you can visually see how users navigated your site.

Remember: Keep in mind that a user can technically visit your site using browser tabs. That would give you a report where people went from page A to page B even if there isn't a link on page A going to page B.

Hence: Use GA to gain insight into trends.

iamchrisle··on Google Analytics for developers
If you want to track if people are reading your blog, you can use the onscroll javascript event that fires events into Google Analytics. (eg: http://cutroni.com/blog/2012/02/21/advanced-content-tracking...)

By looking at time to scroll, time to the end of the blog post, and comparing that to the number of unique page views per visit, you can tell if your content is engaging.

iamchrisle··on Google Analytics for developers
I actually use event tracking a lot to track exactly that. For our clients, we not only know which features they're using most but by tracking validation errors in Google Analytics we also know what parts of the app is giving users trouble.

Best part is, with Google Analytics you can see what people did before and after they ran into trouble and correct for the user experience.

iamchrisle··on Data from two years of blogging with no SEO
1. Are you confusing SEO for visibility?

SEO == Search Engine Optimization. Google, Bing, and Yahoo didn't even crack 0.5% of your referral sites. If you're not getting traffic from search engines then you're not optimized and ranking for stuff when someone searches. That has nothing to do with the technical stuff like tags and more to do with the actual content.

Looking at the data you provide, Hacker News accounts for almost 1/2 your visits, 1/4 on Twitter, then everything else. (BTW, you don't have % of NEW visits in your post which is a more interesting number to read.) The half life of content on Twitter is 3 hours (http://www.factbrowser.com/facts/3488/) which means you're only really visible for, at best, 1 day.

Promotion on Hacker News, Facebook, Twitter, etc. are great but, if I were a writer, I would want to see long-term visibility to new readers where I'm NOT promoting yourself. ... Like Google searches.

Assume people are looking to compare Techstars with something else. The #1 search, according to Google Instant search, for "techstars vs (something)" is "techstars vs y combinator" If your post "Given The Opportunity: Should You Do TechStars or YC" showed up on the first page of Google then I would say you've been able to achieve great visibility without SEO. ..... But you don't even show up in the first 5 pages.

So, I think you've confused Search Engine Optimization with visibility. (common mistake, actually)

------------

Let's look at your data.... You didn't analyse or provide any insight, which is what I think people should DO with data.

(Full disclosure: I'm work in the analytics department for my company. I research and write code to answer these kinds of questions for clients)

2. Are people actually reading your blog?

It says currently that the average pages per visit is about 2 and they're spending 0:52 seconds on your blog. The average adult reads 250-300 words every minute. (http://yhoo.it/SZVfAy) At a glance you average 150-200 word posts. Does that mean they're only reading half of the second page they go to (What is the time on page for second page?) What is the second page? Is it the home page or another blog post?

The data you provide doesn't help to answer that. You didn't mention your "% of Exits". A bounce rate, by definition, is always visits that only visited one page and left. Therefore, "% of Bounce rate" isn't a good metric to look at for you because your average pages per visit is over 1. "% of Exits" sorted by the URL of the page would give you insight into your readers. If your "% of Exits" on your home page is really high, then it may mean your readers aren't finding anything interesting to read. Conversely, if the "% of Exits" is usually a blog post, that's OK, especially if it's their second page, it means they may have read two posts then left.

------------

3. Are you gaining new readers / are old readers coming back?

You said that the percentage of new visits is 70%. Over the past year is that increasing, decreasing, or going all over the place? What about "% of returning visits?" If you're trying to go after new readers, great job. I would think making sure they return for more later is also important. I don't think you really want to be a one hit wonder.

------------

4. Are your readers subscribing to your mailing list?

It's on the right side of every page, so I'm guessing you want to make sure people notice it. Nobody wants spam, so if they subscribe you're almost guaranteed they like what you're writing. Are visitors subscribing to your mailing list? Is that number increasing? It's a good thing if they are.

iamchrisle··on Get Facebook Likes in Excel
Nope. I'll keep dreaming too. ;)
iamchrisle··on Get Facebook Likes in Excel
For me, it's still "proof of concept" right now. It's interesting because Python is much easier to use than VBA. Where I work, we use a lot of Excel and data from various sources. The ability to leverage Python code can be a big deal for me.
iamchrisle··on Get Facebook Likes in Excel
Ah. Right! Thanks. I'll have to change this today then.
iamchrisle··on Google's Code Editor
I use Google Docs code a lot at work in "production". Here's my experiences:

Yes, you can do more than a few hundred lines of code. My in house library is now about 5k LOC. Yes, it's basically straight JavaScript. Everything is there except for the DOM. Yes, the online editor sucks. I don't use it at all. (see below how) No, you cannot use jQuery/Prototype, etc (there's no DOM or Window class). No, you cannot use long running methods. Google Docs cuts you off at around 30 seconds of execution. No, you cannot share code. (see below)

-- How I develop on Google Docs:

1. I develop it outside of Google Docs using Sublime Text 2

2. I test using Node.JS + assert() + methane.js (see below)

3. I then minify it using Google Closure Tool

4. Then I copy and paste it into Google Docs

This works well because the online editor blows when you're doing anything semi-complex.

--- Testing in Google Docs

I use node.js + assert() + methane.js. What is methane.js? It's a little piece of JS that mocks some of the Google Apps classes and functions. I can then override that mocked method to return the value I expect Google to return and test my own methods.

It's here: https://github.com/chrisle/methane

Consider it alpha code. It's not very well documented. It works for me!(tm)....

-- Sharing code in Google Docs:

Inside of onLoad() I've seen people use UrlFetch and then eval() the response string as a way of getting shared code to work. Not ideal, but it works. I personally don't share code or use this method.

iamchrisle··on [dead]
Thanks.
iamchrisle··on [dead]
"Dude" I think was Andre Dhondt (http://phillyemergingtech.com/2012/speakers/andre-dhondt) I think he tripped up he was live coding and everyone could see him thinking and hitting backspace live.

I personally think it's blown out of proportions because everyone there helped debug and got it working. #6.

iamchrisle··on [dead]
I was there. Here is the event timeline here: http://news.ycombinator.com/item?id=3833063

Gist that someone else recaptured here: https://gist.github.com/1893359

iamchrisle··on [dead]
My name is Chris Le and I was there.

Here's what I recall happened:

1. Dude was making a presentation on meta programming.

2. Dude had his laptop plugged in and live coded.

3. Dude seemed to struggle a little.

4. Katz asked him "Why are you doing it this way? Shouldn't you ..."

5. Dude attempted to explain. Possibly tripped up by the question.

6. Group + Katz helped to debug his code and got it working.

7. Katz explained that his code was a common anti-pattern and why.

8. Katz plugged in his laptop and wrote the code on his machine.

9. Katz explained the difference between "extend" and "include" in a module.

10. David did another meta programming demo + counterpoint to Katz.

I don't remember "dude"'s name. It was my 3rd time there. Also, sorry I don't have the presentation. The gist is here that David rewrote and posted: https://gist.github.com/1893359

iamchrisle··on Why I decided to skip college, and how I've fared (10 months later)
Unfortunately, you won't have the time to go back in 2-3 years. You'll be too busy trying to pay your bills, keep the apartment, deal with your psycho girlfriend, have some semblance of a social life, and deal with that stupid used car that needs to pass inspection. Oh, and dont forget about that crap client who won't leave you alone. Good luck dude.
iamchrisle··on Web Scraping with Google Spreadsheets and XPath
ImportXML Cookbook: http://www.seerinteractive.com/blog/importxml-cookbook/2011/...

I would love if anyone can add more to it... i'm trying to start a big collection :)

← PreviousPage 2 of 2