HNHacker News
TopNewBestAskShowJobs

jeffalyanak

391 karma · joined February 26, 2017

[ my public key: https://keybase.io/jeffalyanak; my proof: https://keybase.io/jeffalyanak/sigs/F_8yeh84PNA15xls9MAjnROwDi4w3zdJldBUYmeOKLI ]
submissionscomments
jeffalyanak··on Ask HN: Has ChatGPT gotten worse at coding for anyone else?
I tested it out on some 6502 assembly recently and it made serious logical errors as well as basic mistakes like using 16-bit numbers in 8-bit regisers.

https://videos.rights.ninja/w/m9LX4Tw47vPvbNDSsjFTYh

jeffalyanak··on How a heat pump works
Edit: nevermind, thought this was still about Technology Connections.
jeffalyanak··on Mastodon Web Space Search Tool
Google "or" searches are limited to 10 sites. There are thousands of instances.
jeffalyanak··on Iranian women compete at chess tournament without hijab: media reports
Those are almost universally people living in secular states or more moderate muslim ones.

Muslim people living in places with the freedom to choose generally consider it a choice whereas those living in places without that freedom do not or will not admit to such a belief.

jeffalyanak··on Raspberry Pi shortage drives Enthusiasts to turn to used thin-client PCs
That last bit is a big thing for me.

Using something like a cellphone as a web application server is obviously going to come with unique challenges and it's going to be a compromise in some ways.

For me, one of the biggest drivers for re-using technology like that is to extend their lifespan and reduce waste.

jeffalyanak··on Raspberry Pi shortage drives Enthusiasts to turn to used thin-client PCs
The reason I don't use an old, general-purpose PCBs for the types of projects you describe is because they're generally very poor in the terms of performance-to-power ratio.

SBCs like the raspi are much more power efficient, but I absolutely agree that they're not the only option.

Another great option for certain types of projects are used smartphones. You'll need to put thought into the specific models that will support your needs, but many android phones can be readily converted into low-power Linux machines and—with the right adapter—can be used with a wired ethernet adapter without losing charging.

If you want to host a simple web service, something that draws only a few watts and has a built-in UPS (its a cellphone, after all, and has a battery) can be pretty compelling.

Add to that the fact that you can often pick up a reasonably powerful, used android phone for less than the cost of an SBC if the screen is cracked.

jeffalyanak··on UK government ban for Chinese Hikvision CCTV cameras
Time to watch the government auction sites for cheap cameras.
jeffalyanak··on Music Studio: Windows-based C64 SID music creator software
Have you ever checked out Furnace Tracker? It's very similar (with compatibility for deflemask modules) but with expanded PSG support and a lot of fixes to accuracy.
jeffalyanak··on Growing a home apothecary
It's a bit weird, but makes sense as a rhetorical device. It's sort of like saying "Growing your own vegetable market".

It's not literally true, but it expresses the idea that you are growing a wide variety of things that one would find at a vegatable market.

jeffalyanak··on 3D map of the Czech Republic, made from 12.5cm/px imagery (2017)
Don't get me wrong, I think it would be super cool to _also_ include a topographical map feature for those who wanted/needed it, but I don't expect most people would be able to use it in lieu of a simple, visual 3D view.
jeffalyanak··on 3D map of the Czech Republic, made from 12.5cm/px imagery (2017)
Why sacrifice accessibility and usability to save on a bit of computation?
jeffalyanak··on Ask HN: ActivityPub or Mastodon?
Yeah, that works.
jeffalyanak··on MilkyTracker
Yup, 8bitbubsy's FT2 clone completely replaced Milky for me. I was never a huge user of it but I used it as a scratchpad for DOS music when I wasn't near my DOS laptop.

It compiles perfectly well on my Pinebook Pro, so now I have with me all the time, along with the equally fantastic PT2 clone: https://16-bits.org/pt2.php

jeffalyanak··on Mechanical Induction Cooker (2015)
Oh yeah, even a micro hydroelectric generator can easily do 500 watts continuously, so add a bank of batteries—maybe one made of recycled li-ions—and you could easily store enough energy to run an induction top for all your daily meals.
jeffalyanak··on Mechanical Induction Cooker (2015)
Yeah, 80 watts was just an arbitrary doubling of a rough estimate for average cruising on a bike.

That said, I think it's still somewhat reasonable to do the calculations below the level of a workout because not everyone is going to want to do a high intensity workout every time they want to cook something.

jeffalyanak··on Mechanical Induction Cooker (2015)
I'm in Europe and the induction cooktops are the same here. There are a few models with actual dials/knobs, but they're (almost?) universally very expensive models.
jeffalyanak··on Mechanical Induction Cooker (2015)
Yeah, it absolutely comes down to how you need to use it.

Unfortunately, there are some types of cuisine that rely more heavily on quick, precise temperature control.

jeffalyanak··on Mechanical Induction Cooker (2015)
Yes! I've thought about that exact same thing!

It would be a cool marketing gimmick, too. Call the gym something like "Watt's Gym", and add card readers to each machine so people can track their total produced killowatt-hours.

The actual amount of energy generated would still be pretty small, but it would be a fun gimmick to motivate people.

You could have an app and little screens showing the total energy that you generated this session or month, and see how much energy you contributed to the total for the whole gym that period.

Heck, an average workout could generate maybe 0.03-0.04kWh and if the gym was popular enough that would add up to a portion of the electricity used by the facility.

Those savings could even be passed on to the members with a reward system of some type, which also works as a marketing/motivational gimmick.

jeffalyanak··on Mechanical Induction Cooker (2015)
Yeah, aside from the actual interfaces I think induction units are great. They are safer than most (all?) other types of cooker, they're super fast to reach set temperature, and they have the potential to last a really long time.

I just really want at least one inexpensive unit like the one you linked to come out with a knob for temperature control. Surely that wouldn't affect the cost that much?

jeffalyanak··on Mechanical Induction Cooker (2015)
I'd be happy with knobs!

The biggest issue I've seen with consumer induction cooktops is that all the affordable ones use stop touch/tap interfaces that make it really difficult to adjust heat while cooking.

If the primary input was just a potentiometer (or rotary encoder, if they wanted to be fancy) it would be trivially easy to set or adjust any hob at any time.

jeffalyanak··on Mechanical Induction Cooker (2015)
Something to keep in mind is that a hotplate or inductive cooktop may not need to run at full duty cycle depending on the heat dissipation of the materials involved and the setpoint of the themrostat or temperature probe.

It may be pulling its maximum rated power while it comes up to temperature, but it'll be regulated by some sort of thermostat.

Once it's at temperature the rate of heat dissipation of the hob, pan, and even the ingredients themselves will affect how soon it'll drop below the threshold and power draw will resume.

A system with a lower maximum power would still work, but it would be running at a higher duty cycle to maintain the same temperature. It would take longer to get to the set temperature in the first place and slower to bring it back to temperature whenever the temperature drops.

That said, I'm pretty confident that 700-800 watts would be useful for many types of cooking and I think it's achievable with a dozen or so people pedaling.

jeffalyanak··on Mechanical Induction Cooker (2015)
This might be feasible in a setting with multiple people providing power, but I'm not sure how usable it would be with just one person.

As a rough rule of thumb, an average person riding a a bike at about 15 km/h would be using 30-40 watts of power.

Let's assume that this cooking device would be twice as hard to pedal. If it converted your pedaling with 100% efficiency—which it certainly wouldn't—it would give you a peak output of 80 watts of power.

In that case, you'd still only get about 80 Watt-hours of energy after 1 hour of pedaling. For context, it takes about 90 watt-hours of energy to boil 1 litre of water, so you'd be pedaling over an hour to boil it. In fact, that's ignoring the rate at which the water is dissipating heat out into the air. You might not even get it to boil at all.

For this to work at all, you'd need many sets of pedals to allow multiple people to put energy in. With 10 people pedaling in the above scenario you'd be getting 800 watts, which would be usable for a lot of different types of cooking.

jeffalyanak··on Inca Child Sacrifice Victims Were Drugged
You'd have to chew quite a lot of them, but it's certainly possible.
jeffalyanak··on Barcelona-style “superblocks” could make cities greener and less car-centric
I guess the surprise comes from the fact that there's a lot of supply as well.
jeffalyanak··on Granting Pardon for the Offense of Simple Possession of Marijuana
If politicians always did the popular things at the beginning of their term they would be far less likely to be voted back in. Unfortunately the news cycle and therefore the voting public has a short memory.

It does suck a bit that the system incentivizes being strategic with the timing of key decisions, but politicians who didn't do so would be hurting their chances of reelection.

jeffalyanak··on UK Plans for Three-Hour Power Blackouts in Event of Gas Shortages
I recently built a small home solar battery system with the goal of keeping my low-power DC devices charged and running during outages like this. I've only been running it for a few months now, but I've been using it to keep all of my USB devices charged during that time.

In an actual power outage, I can even plug in my modem, router, and AP—using DC barrel jacks for the modem and router and a DIY PoE injector for the AP—so as long as the upstream infrastructure is still powered I'll be able to keep working.

Since I rent, I can't do a roof-mount or grid-tie system, so I opted instead to build a 12V DC system. I purchased a used solar panel and I've assembled a ~0.5kWh battery from used packs.

I'm using insulated nickel strips to pass the solar panel cables through a closed closed window in a way that doesn't require drilling holes and has a minimum impact on the insulation seal of the window (although insulation in the UK really sucks anyway).

Most of the fittings and wiring have been used and come mostly from automotive scrap (an advantage of using common 12/24V standard fittings), so the financial cost has been very low. That said collecting use battery packs, testing cells, and assembling them into new battery packs certainly takes time.

jeffalyanak··on Toyota CEO talks about why he isn’t all-in on EVs
Yup!

I'm not sure what the max power output of those types of deployments are, but I've seen block heaters in Canada that pull as much as 1500 watts, so that's not insignificant.

jeffalyanak··on Toyota CEO talks about why he isn’t all-in on EVs
I say it's easy to make L2 street parking ubiquitous _anywhere_, not _everywhere_ all at once.

Obviously taken in totality it's a massive undertaking, but you could say the same thing about streetlamps, or roads, or basically any ubiquitous infrastructure.

Many places have started with 1-2 spots per neighborhood, which is prudent and scalable. As demand rises they should be able to keep pace with that demand without significant technical challenges.

jeffalyanak··on Toyota CEO talks about why he isn’t all-in on EVs
Maybe it's not your intention, but your comment seems to imply that it's too difficult to attempt because of how much copper would be involved. However, I suspect you wouldn't need to purchase all the copper up front.

You'd be aiming for short runs off of existing power infrastructure and you'd be scaling up over time. You also wouldn't be running these to every single place that a car _could_ park, just trying to get a critical mass of them near where people live.

Most people already have lots of copper cabling in their houses and most cars are parked overnight near to residential housing, so the additional copper used would only be some fraction of what is already in most homes.

jeffalyanak··on Toyota CEO talks about why he isn’t all-in on EVs
For private property it's easy and inexpensive to just install your own L2 charging. Even if you rent, it probably wouldn't be too hard to convince your landlord to let you pay for an L2 charger install if they already offer you private parking.

I was thinking more about street parking and parking lots, though, since that's an area with a the less immediately obvious solution.

I'm sure it differs between principalities, but in many places the city/government controls the area immediately beside the street and if they were onboard it would be feasible to install streetside chargers early everywhere.

Privately owned parking lots couldn't be forced to do so without legislation, but it's inexpensive and adding a few into the mix could add to their revenue streams.

← PreviousPage 3 of 6Next →