2,460 karma · joined September 24, 2018
https://github.com/Satellite-im
Dioxus is still less than a year old, but it’s getting more and more use.
The average desktop/mobile binary is less than 2mb, but that’s with zero size optimizations to shrink the output. You can certainly get less.
Dioxus runs on a native thread and renderers into the webview, so there’s very little JS footprint and the render resources are shared among all webview on your system.
I haven’t experimented with it, but it’s entirely possible to run on a raspi with webkitgtk. We’re building a native renderer with WGPU and already support rendering to the terminal.
From what I understand, a lot of the work from the past years has been trying to piece together geometries, pulse timing, stability, and quality of targets.
Yesterday, everyone was complaining about the 2.2:2.0 ratio, but now we're working with 3.15:2.05.
With modern lasers, that'd be a total Q of 0.375 assuming 100% efficiency through direct-energy-capture.
The jumps to get here included
- 40% with the new targets
- 60% with magnetic confinement
- 35% with crycooling of the target
The recent NIF experiments have jumped up in power. The first shot that started this new chain of research was about 1.7 MJ of energy delivered. Now, 2.15 MJ. However, the output has jumped non-linearly, demonstrating the scaling laws at work.
> I’ve helped to secure the highest ever authorization of over $624 million this year in the National Defense Authorization Act for the ICF program to build on this amazing breakthrough.”
It's nice to see this milestone recognized, even if the funding it still rather small.
2. Again, all technology is expensive in the beginning. Who cares? The important thing here is to climb magnitude by magnitude. NIF climbed many magnitudes in recent history, making it notable.
3. As you mentioned, Helion and direct energy capture. D+He3 + DEC might be not feasible with a tokamak, but the scaling laws of fusion (size, current, B field) are in favor of experiments that get close.
4. See 3
5. See 3
6. See 3
7: See 3
I think you have a very negative take on what is an amazing breakthrough accomplishment. Even if the NIF doesn't end up converting their research into a commercial powerplant, they have at least demonstrated experimental viability of inertial confinement fusion. It's only a matter of time before the next generation shows viability of D+He3 fusion and then we'll have even more options.
https://www.llnl.gov/news/three-peer-reviewed-papers-highlig...
In particular, the original article talks about magnetic compression hypothesis being a byproduct of white dwarf simulation. With this new regime, they were able to apply the same ideas to fusion, resulting in the breakthrough.
With ignition being a regular thing in laser fusion going forward, I suspect many groups will have some slightly varied approach or some technique improvements.
If you're into fusion and lasers, there's a lot of areas that are still ripe for magnitude leaps.
- Laser power, timing, materials, and cost
- Metallurgy of the target canister
- Construction of the target and perfecting it as you mentioned
- Absorption of energy
I believe the NIF will focus on #2 and #3 as of course they focus more on making the "boom bigger" rather than making it cost effective of useful. IMO another group (startup or otherwise) will step in as an actual project in this space.
One area to innovate here is to use a different fuel mixture that doesn't produce neutrons. We wouldn't need liquid lithium/lead, breeding, or any of the complexities people very commonly complain about.
- https://en.wikipedia.org/wiki/Aneutronic_fusion
- https://en.wikipedia.org/wiki/Direct_energy_conversion
It's entirely within the realm of possibility that the technique to achieve ignition will open the door for 5:1 or 10:1 q with neutron-free fuels.
Even a total Q of 2:1 or 3:1 is a huge win, and that's within a magnitude of the modern tech.
--
Something I want to mention here too - the easiest aneutronic fuel mixture available is H2 + He3. It hasn't been explored too much since He3 is hard to come by on earth (though you can mine it from the moon!).
But, Helion has patented a way to generate He3 from H2 fusions. We don't need to mine He3 to achieve neutron-free fuels, just need to transmute it from seawater.
I think it's very clear, given the past year that NIF has had, that they are very rapidly approaching a point where we have the tech to "solve" inertial fusion.
https://lasers.llnl.gov/news/papers-presentations
Getting fusion right is done a magnitude at a time. Right now NIF is within 1 magnitude if they built it with modern laser tech. Many fusion designs are 10 magnitudes away or more.
Their most recent article has a ton of great data and next steps:
https://lasers.llnl.gov/news/magnetized-targets-boost-nif-im...
This includes
- Cryo-cooling the main target
- New alloys
- Magnetic compression of targets
The recent advancement that helped reach ignition (in the last article) boosted performance 40%.
The advancement between then and now: nearly 60%.
Within the past 6 months, NIF has nearly doubled energy output of the reaction.
Plus, if you know anything about fusion research, you'd know that energy outputs tend to scale non-linearly with energy input and size. This tends to be on the order of the power 3 or 4. Hence the existence of ITER.
NIF has uncovered some new science, closed the magnitude gap, and made it actually realistic for inertial confinement to be a feasible tech for a power producing plant.
I don't have time to write notes app, and even if I did, I probably would've made something like notion, but worse.
At this point, I do all of my technical writing in Notion. Equations, tables, nesting, publishing... I can even embed an interactive graphing calculator or videos of my work. A plain markdown file can't do that and neither can LaTeX.
It's pretty young but solves a lot of ergonomic issues with UI in Rust. It's probably the closest you can get to React-level ergonomics (better in some ways) with Rust.
I'd say a lot of the ergonomics are there, but not every pattern has been translated cleanly from React into Rust yet.
[1] https://github.com/DioxusLabs/dioxus/blob/master/packages/in...
Location: Bay Area
Remote: Yes (prefer in-person or hybrid)
Willing to relocate: Yes
Technologies: Rust, TypeScript, Python, Go, C, C++, Lua, Verilog, OpenCL, CUDA, FPGA -- embedded, electronics, hard math/physics
Email: jkelleyrtp@gmail.com
Resume: https://jonathan-kelley.com/resumeGithub: https://github.com/jkelleyrtp
I'm a graduating senior at Olin College of Engineering with a nearly two years of fulltime work experience under my belt. I've built major components and products for venture-funded startups, worked on particle accelerators, and deployed hardware hundreds of feet above the ground on live constructions sites in San Francisco.
My most recent project is http://github.com/dioxusLabs/dioxus - with over 3000 stars in under two months.
My area of interest is software-for-hardware and full stack development that spans the entire stack. I'm looking for a full-time role in either small or big, and I'd be able to provide value extraordinarily quickly. I'd prefer to work with Rust and embedded systems, but can be thrown at C/C++/Python projects just fine.
Location: Boston (current) / SF / LA / NC / NYC
Remote: Yes (prefer in-person or hybrid)
Willing to relocate: Yes
Technologies: Rust, TypeScript, Python, Go, C, C++, Lua, Verilog, OpenCL, CUDA, FPGA -- embedded, electronics, hard math/physics
Email: jkelleyrtp@gmail.com
Resume: https://jonathan-kelley.com/resumeGithub: https://github.com/jkelleyrtp
I'm a graduating senior at Olin College of Engineering with a nearly two years of fulltime work experience under my belt. I've built major components and products for venture-funded startups, worked on particle accelerators, and deployed hardware hundreds of feet above the ground on live constructions sites in San Francisco.
My most recent project is http://github.com/dioxusLabs/dioxus - with over 3000 stars in under two months.
My area of interest is software-for-hardware and full stack development that spans the entire stack. I'm looking for a full-time role in either small or big, and I'd be able to provide value extraordinarily quickly. I'd prefer to work with Rust and embedded systems, but can be thrown at C/C++/Python projects just fine.
In those cases, https://github.com/fitzgen/bumpalo works amazingly as an arena. You can pretty much forget about reference counting and have direct references everywhere in your graph. The disadvantage is that it's hard to modify your tree without leaving memory around.
We use it extensively in http://github.com/dioxusLabs/dioxus and don't need to worry about Rc anywhere in the graph/diffing code.