I'm not sure that's feasible. I've been flying multi-rotors for quit some time and if you lose a motor on a quad it's nearly instantaneously on a collision course with the ground. Y-6 or Hexacopter would be more feasible from a redundancy standpoint.
I understand the reason they did it, though I think they should have done this way earlier.
This seems to send a negative signal that you're not growing as fast and want to keep your cards close.
You could always buy 10 of the $600 printer sure there is more overhead but the effective bandwidth is increased. Unless you just need a single cup, however you could be printing multiple cup designs at the same time and if one machine goes down you're not completely shut down.
Yeah but the right to use land they are building on was a granted Monopoly by the local governments. If you buy all the land, install all the poles and run all the cable, sure you should be able to do whatever you want with what you build. However, their system is built on billions of dollars of public infrastructure granted to them as a monopoly "in most cases".
Flying from known point A to known Landing Zone B via Multi-Rotor is actually a relatively routine task given current tech as you can buy a 3DR Iris for ~$750 and it will (relatively) reliably do just that. However add in unknown landing zone conditions and things get tricky.
You can fly a pretty good distance in 18min @30-40mph (Napkin Math - somewhere in the 10mile one way range) it would be reasonable to speculate they were within 10km as they still had a way to go to get across the border but that's still a pretty large area.
Having flown many fixed wing and multi-rotors of sizes small to large fixed wing tends to require more skill to pilot and are harder to get autonomous landing right (a bad reading from the barometer on landing and you're toast) at least with the Pixhawk on a multi-rotor it'll stay hovering over the landing point until it is relatively certain that the GPS height and barometer readings match before landing. I've witnessed planes nosediving into the ground under the same conditions. Now indeed there are extra sensors that can help with this Lidar etc. but for a standard setup it's an issue.
You can quite easily build a drone capable of flying for many miles with a 2.7kg Payload for 2-3K. Indeed $10,000 would buy you a very, very nice setup. If they wanted to go the plane route a Mugin will do 15kg and still be under 10k [1]
Being an Accredited Investor (in the US) is 1Mil in net worth not including the value of your primary house. Indeed that seems to exclude most "poor people" I know
Balloons can actually go much higher (not sure on the rules with balloons) but UAV's are limited to 400ft AGL and not within 5miles of an airport by the FAA.
I've been using Freesound since at least 2008 and it's an awesome resource. Interesting to see it posted here is there something that has changed with the site or is this more of a FYI?
I can imagine that this is how it feels when you go from a few people in a apartment/basement/house to a company with an office and eventually acquisition. (I've only been through two of the three so far) Regardless of how cliche it might sound at this point it's understandable they always use the same term.
Deceleration is going to happen regardless since you're coming down from much thinner air. The plane would most likely rip apart long before hitting said target, Mach 5 at Sea level does not do good things to airframes.
Even on your standard car seats can usually be swapped out in under an hour (Four bolts per seat, disconnect one power cable - Reverse to reinstall) carpet + seats takes longer but still only a 3-4 hour job when I've done it in the past. Usually dealers will charge an insane markup replacement parts though "bundling" them into an upgrade package (for less then the sum of purchasing individually) seems to make sense.
Not sure about that being feasible to detect things of that nature with this system. For example you can build a mini quadcopter (size of a bird) weighing 5-800gms that can provide 2+KG of thrust. Back of the napkin math says a 400gm m67 grenade is easily within the payload capacity (Assuming 70% throttle to hover all up payload would be 1400+-gms). I would be very impressed if this could differentiate "bird sized flying objects" from birds. With that in mind I think we can be glad that complicated plots of that nature stay in the realm of James Bond rather then reality. Also I think the Boston bombings show that bad people don't need complicated technology to do bad things.
I've heard meal worms thrown around as having potential as a protein base, however I think the thought of plant based burgers much easier to stomach (pun!)
The Bay Area is pretty awesome however the housing prices are not, I would say it's the single biggest issue here. I've been told my $2000/mo Rent for a 500Sqft 1Br Apartment in San Mateo is a "good deal".. to contrast that the mortgage on my 2000Sqft house back in Miami (not far from the beach) is $650/mo including Taxes and Insurance.
Replacing undamaged body parts is orders of magnitude easier then replacing something that's been in a crash. Most bumpers or fenders can be removed in under an hour and install time is similar. (Source: I worked at a body shop while I was a teenager and I used to build AutoX/Drift/Rally cars after that) You can charge insurance insane amounts for parts if the value of the car is high enough that it's not going to be a total loss. That "cost" is separate from the actual cost of the parts/labor. Along the same lines MRIs really don't have to cost $10,000 regardless of what your hospital puts on the bill. When you can go to the phone book and get the same MRI for $500 from many sources.. but you're not going to be price shopping when you're in the ER with a broken leg. What's the real market rate?
Keep in mind dealers are not the ones who offer the Update/Upgrade you are dependent on aftermarket services which tend to be more expensive (It's easily more expensive to restore a "normal" car then buy a new one) However in Tesla's case they can roll the restore into a easy to perform upgrade because of their limited number of models and prior engineering of things like battery swaps to be quick/easy. While it might take a hundred hours to do a restore of a normal car Tesla can swap a pack, some body panels, electronics and interior in a days labor.
If Tesla continues to follow this route it will have lasting implications for the automotive industry. Instead of replacing" your car every 5-10 years you can "Upgrade" keeping existing chassis but replacing enough to make it "Like New" (Refurb vs Replace) Automakers sell a completely new car just to make a few thousand dollars every 5-10 years and that's only if the customer stays loyal (Also why some car companies have loyalty incentives) in this case Tesla can still make that income and the customer is locked in as a bonus this will help to keep resale values high since there will be less cars on the market because owners upgrade instead of selling.
Now more then ever I wish I bought Tesla stock before it went through the roof.
Not related to this specific case since I generally think calling people out is bad form. However, I remember back in 2011 when looking at job postings for iOS Positions that "Required" 5+ years developing for "iOS" I could not help but chuckle that the only people that would have that would be the Apple developers who worked on it before it was released. 5+ years in Objective C sure, but at the time iOS was only 3 years old. Recently I've been seeing the same type of postings for "Swift" so it's important to keep in mind that just because the recruiter or first line interviewer does not know A from Z does not mean the organization as a whole is clueless. People make mistakes on job postings and in the case I think it's likely they just did not like him and that was the excuse they came up with to let him save face.