HNHacker News
TopNewBestAskShowJobs

osamagirl69

1,281 karma · joined March 4, 2018

submissionscomments
osamagirl69··on Tell HN: AT&T disabled phone numbers and accounts of users using the old phones
It is not just "old" or 3G-only phones, it is any phone that is not explicitly on their whitelist.

I have been using a f(x)tec pro1 for years on 4G+VoLTE on their network, and got the same text message saying they would terminate my account if I did not get a different phone. I decided to lay low and moved my sim into a supported phone with the intention of letting the dust settle white I prepare to port my number to t-mobile (they have by far the worse service in my area, but seem to be the only US provider allowing the pro1 to be activated).

I still have an inkling of hope that I will be able to move my sim back to the pro1 after whoever is responsible for the 3G shutdown gets their bonus and they stop going after unsupported devices aggressively.

osamagirl69··on Ask HN: My house just got hit by lightning and it fried the PSU in my computer
A lightning bolt carries a current upwards of 100,000 amps, and has upwards of 10 billion joules of energy.

A high end consumer grade surge suppressor might be rated for 1000 joules, and a few thousand amps of peak current.

If lightning directly strikes your house wiring, no amount of surge suppressors are going to save you.

For an idea of what a surge suppressor that can handle the blow of a full on lightning strike looks like, take a look at the units used by utility companies on their high tension lines. Typically they are about a 6" in diameter and often several feet long -- and those units still need to be replaced after a single direct hit! https://www.equipmentimes.com/product/details/Lightning-Arre...

The best thing that you can do to protect yourself in the future is to have a lightning rod network installed on your roof, which will shunt the current from the strike directly to the ground. Otherwise the only failsafe alternative is to completely unplug sensitive equipment (still OK to run from battery but with all ethernet etc cables unplugged -- wireless network only) whenever there is a storm predicted.

osamagirl69··on Ask HN: People who use different emails everywhere, who sold you to spammers?
Just took a quick look through the spam folder and found spam (real spam, like fake fedex invoices or whatever) from:

pretty much anything vaguely related to crypto

edaboard.com

lastfm.com

pcbway.com

asus.com

osamagirl69··on Ask HN: What do you do to recharge after a day of work?
>I'm only able to consume easy to digest content in this state.

I have fallen into this cycle many times, my advice for if you are feeling tired is to give up that sort of content for a few weeks. In the time when you would [watch tv, game, browse reddit] just sit on the patio and watch the clouds go by (maybe with a single beer or glass of wine if you are so inclined) and let your mind wonder. It can be excruciating at first as you overcome your addition to mindless content, but after you get over that you can finally let your thoughts be free and actually relax. As you get into the rythm then you can start to shift to more productive activities like going for a walk or cooking or blogging or whatever, but the first step is to break the addiction to mindless content.

osamagirl69··on Ask HN: Share your personal site
https://krazerlasers.com/

Lasers, high voltage, amateur rocketry, and general nonsense

osamagirl69··on My essential Firefox fixes in 2022
Thanks so much for this. I confirmed that this works on a virgin firefox install, and was able to get it working on my config after messing with the search settings to enable search suggestions.

The key here is that if firefox sees an exact match to a bookmark keyword, it will put that as the top hit on the address bar. So if you put a short keyword for your bookmark (in this case, ha for the aforementioned hackaday example) you can type in h a {enter} and it will take you to the full url of the bookmark instead of the base.

osamagirl69··on My essential Firefox fixes in 2022
This is intriguing -- can you explain your preference setup a bit more to get this behavior?

I was not able to get this to work on my setup. I added a keyword 'uniquekeyword' to the hackaday bookmark, but if I start typing uni... it just tries to give me a web search. I tried enabling/disabling the search bar and messing with my address bar preferences but no dice.

Counter-intuitively, it does sort of work if I put the keyword as a tag. It still tries to offer me a search as the top hit, but the tag result is the second hit.

osamagirl69··on My essential Firefox fixes in 2022
This is actually the root of the problem, the address bar behavior in my firefox config always gives me the first hit as one of 2 options:

1. Base url of a website (in my case, it only searches bookmarks, but if you enable search history it will match to base url of historical searches as well)

2. If it can't find a match, then it defaults to a web search

What I want is for it to match full url's from either the history or bookmarks, but this does not seem to be an option

osamagirl69··on My essential Firefox fixes in 2022
Tangential -- but my biggest pet peeve with firefox is its autocomplete behavior in the address bar. It seems to be impossible to prevent it from putting website.com before website.com/page_I_actally_want

The specific case I have: I use the URL bar basically as my bookmarks (turned off browsing history and top sites in address bar suggestions), and one of the pages I frequency is https://hackaday.com/blog/ (note that this is distinct from the base https://hackaday.com). In chrome it works fine, if I hit h in the address bar it immediately autocompletes it to the full url, but in firefox it autocompletes it to the base url so I have to hit h then down arrow to get to the site I want.

For the life of me I haven't been able to figure out a way to change the behavior, and it absolutely infuriates me that there is no obvious way to fix it.

osamagirl69··on Ask HN: Alternate Email hosting to G Suite
There is a button to import to fastmail, which worked very well--basically a seamless transition. The only manual part I had to do was copy over my filter rules.
osamagirl69··on Ask HN: Alternate Email hosting to G Suite
Fastmail. Been using them for ever and they have been nothing but great. Really nice to have actual support if you do need it (I did once for a misconfig on my end of my domain records, they got it sorted in a few hours).

I used the auto-import tool from my existing google accounts and it took a while but successfully imported everything with basically zero effort.

osamagirl69··on Ask HN: Should I publish my research code?
There are about 100 comments saying the same thing already, but I would highly suggest publishing the code:

1. It gives your work more visibility. If there is a easy git clone route to reproducing your work, it offers a low effort starting point for people to build upon your work which means they are more likely to use it. Plus you get free citations from anyone who touches it.

2. There is no reason that people should be hoarding code in academia, and the only reason people do it now is a sort of prisoners dilemma problem (first person to publish their code had to start from scratch, so they feel possessive and let it die when they graduate). Every researcher who releases their code chips away at the problem and pushes the community to be more open with their code which is intrinsically more efficient.

3. If you get lucky and the community adopts your code it will be viewed very positively by potential future career advancement committee being 'they guy who wrote _x'

4. When I started in academia I based my codebase on an existing publicly available code, which saved me a huge amount of time in my work. I built upon it (not expanding the base code, but using it as a module to integrate experimental measurements to the simulations tools I wrote from scratch) in my PhD and when I graduated I handed a virtualbox image with the whole mess (yay free code--wouldn't have been possible with nonfree code) off to my successors, people in new groups, etc which ended up being the base of an entire new research group at a different university. Every once in a while I get an email asking for help, and get a notification saying that someone cited the code.

osamagirl69··on DIY Onewheel – open-source self balancing skateboard
It really is amazing how much the state of the art in hub motors has come since 2012. Building silly electric vehicles is almost too easy now that you no longer need to wind your own motor and write your own bldc commutation firmware...
osamagirl69··on Megaprocessor – A micro-processor built large (2016)
The mega processor is one of my all-time favorite computers, along with the Magic-1 https://homebrewcpu.com/

The megaprocessor is just absolutely wonderful in how it bridges from 'here is a transistor, it lights an LED' to 'here is a computer, it plays tetris'. I always struggled to unwind the layers of abstraction in a modern computer from atoms in the CPU to running python, but being able to just look at a bunch of literal transistors (with LEDs on each gate!) wired up playing tetris shows how a computer really works in such a profound and awe inspiring fashion.

Magic-1 is sort of the next level higher complexity, where it is made out of very simple TTL (most complicated chip function is the ALU--a circuit I had to build as an EE undergrad out of or- and and- gates) and it hosts a webpage. It currently seems to be down, but you can see it on the wayback machine https://web.archive.org/web/20210815180101/http://www.magic-...

I will never forget when I came across that site and realized that I was interacting with a wirewrapped pile of ram and nor gates over the internet. There was even a time when you could telnet in and play some retro text-based adventure games, To this day, the only time I have played Adventure was on Magic-1.

osamagirl69··on Discipline by King Crimson
Grew up listening to these guys (in fact, even in the womb I was at their concerts) and I would certainly say that their music has shaped who I am for the better.

It is absolutely bonkers that they (or, Fripp at least) are still playing music after 50 years and still touching the hearts of so many people.

A little bit off topic -- but we had a new consultant join our team and the only personal effect he brought with him was a grateful dead dancing bears mug. I have no idea what he does but we were able to connect over our love of good music and still today are good friends.

osamagirl69··on Signal is experiencing technical difficulties
For what it is worth, creating an account on the matrix home instance using app.element.io or the matrix android app (haven't tried ios, but I assume it is the same) takes literally 3 clicks. Click register, select the matrix home server, type in your desired username, password, and recovery email (no phone # required or even requested) and click register.

The one part I see people struggle with is transferring keys across devices which is slightly convoluted (your keys are not stored on the matrix home server--for obvious reasons) but there are wizards to help you install your keys to a new device and for most use cases with phones completely unnecessary since you will always be using the same device.

osamagirl69··on Raspberry Pi KVMs Compared: TinyPilot and Pi-KVM v3
I am pretty sure all you would need to do is plug in a usb LTE modem to make that happen.
osamagirl69··on Tesla valve
There is an youtube video[1] by the excellent channel Huygens Optics which goes through trying to make a microscopic tesla valve.

The valve does not work as a checkvalve (it is sufficiently small that surface tension and all that work differently than in a macroscopic system), but the author argues that it did satisfy the real goal of being a tesla valve -- which is to look sexy and high tech.

[1]https://www.youtube.com/watch?v=gQnmP7UD_zk

osamagirl69··on Reverse-Engineering a CRC Algorithm (2010)
This is a wonderful story, I love the writing style. Learned a ton about CRCs and enjoyed the journey too.

I also love the site as a whole -- it looks to be hand written html (proofs too!) without even so much as a css stylesheet.

osamagirl69··on IBM creates 2nm chip
You can already get a single rackmount server with over a trillion transistors. For example, the CS-2 [1] has 2.6T transistors (on a single die no less!) in 15u.

If you are willing to count the transistors in your dram (dram has one transistor per bit), then you can already get over 35T transistors (32x 128GB ECC DIMMs with 1.2T transistors per DIMM) per 1RU, or over a quadrillion transistors per rack.

[1] https://cerebras.net/product/

osamagirl69··on SiFive Tapes Out First 5nm TSMC 32-bit RISC-V Chip with 7.2 Gbps HBM3
This is blatantly false, unless you are confusing battery for an assembled battery pack. In EVs each battery management IC can run somewhere in the range of 4-14 cells in series per chip, and they almost universally run banks of up to 100 cells in parallel. For example, in the tesla model s the pack is comprised into submodules of 76 cells in parallel and 6 of those groups in series per management chip--so only one management chip per 456 cells.
osamagirl69··on Pro1 X: A Linux smartphone with slideout keyboard
The only change between this phone and the pro1 (non-X) is the downgraded processor -- so I encourage you to check out the original pro1 reviews. For the most part they are 'if you want a keyboard it is a good phone--it is otherwise mediocre in every way'. Also - the 'linux' support is a bit of a stretch, the community ported over ubuntu touch which is basically just android.
osamagirl69··on Pro1 X: A Linux smartphone with slideout keyboard
The keyboard is actually a little bit too big for most hands, but I have been using this device for about 2 years now and generally it is a dream to type on. It took about a month to get comfortable with the layout but I can thumb type without looking at the phone. I have never owned a pure-touch based phone so I can't really compare to the modern touchscreen experience though.
osamagirl69··on Video RAM Transplant Doubles RTX3070 Memory to 16GB
No, a modern GPU literally draws about 1000 amps of current. For example, a non-overclocked 3090 draws about 500w under load (some of this goes to memory, but that is powered by the motherboard not by the external power connector), at a Vcore of roughly 1.1v which gives a bit over 450 amps--on average! The peak power consumption (as measured on a nanosecond scale being consumed by the asic itself) can easily be double the average power consumption due to the bursty nature of asic power draw.
osamagirl69··on Video RAM Transplant Doubles RTX3070 Memory to 16GB
The reason why the VRM is tightly integrated with the asic is that there are extremely stringent constraints on the power integrity connecting these two parts. To first order, a decent GPU draws about 1000 amps of current, so even a single milliohm of resistance would absorb the entire voltage supply. Not just the ripple tolerance, the entire power rail! This is before we even get into the ludicrous requirements on transient behavior, inductance, etc, of the connection.

They do make GPUs with a socket for the asic (typically only used in test labs) so it is theoretically possible that you could for example... buy a 2070 carrier and then get nvidia to sell you a 2080 asic to socket into the carrier. But generally the technologies used in GPUs change every generation (memory technology, number of memory channels, display technologies, etc) so you probabably wouldn't be able to keep your carrier more than 1 maybe 2 generations tops.

osamagirl69··on UC secures landmark open access deal with world’s largest scientific publisher
I am genuinely surprised that the UC was able to get Elsevier to agree to this much, even if it does come up well short of their original list of demands [1].

I do wonder what this means for researchers, in particular there was no mention of publishing fees. Generally in hybrid journals there is a hefty price tag for open access (basically -- you are paying for the expected revenue generated by your paper...) so I could see that this means the publishing fees for a top Elsevier journal upwards of 5 figures--a price that research groups will now need to cover. I was at a talk by Nature about their Nature Photonics journal, and when asked if they would ever consider doing open access for Nature Photonics they said they have thought about it, but that it would cost them about $40,000 per paper for it to be commercially viable. Even though the peer review is free, they have a team of editors that need to get paid and they only publish 10-20 papers a month.

Also -- see the previous discussion with more focus on Elsevier's side of the story at [2]

[1] https://senate.universityofcalifornia.edu/_files/reports/rm-...

[2] https://news.ycombinator.com/item?id=26379954

osamagirl69··on Ultra-weak gravitational field detected
>Just because we don’t have a scientific experiment to measure gravitational forces at small scales doesn’t mean they don’t exist mathematically right?

That is correct--it has been expected (since, you know, Newton...) but not yet measured at this scale. That is why the headline says "detected" as opposed to theorized.

>What am I missing when they say quantum particles do not fit with gravity.

Quantum mechanics predicts that Newtons description of gravity will break down under certain conditions. We currently do not have the ability to measure this effect, so it is all theoretical at this point.

osamagirl69··on YouTuber Builds Working 3D-Printed Turbojet Engine and Tests It in His Attic
I feel like claiming it is "working" and "3d printed" are tenuous at best.

It did work... for several seconds before it melted.

It was 3d printed... except for the turbine, shaft, bearings, and combustion chamber which were made of metal, and the structural components which were cast from ceramic.

Also, FWIW, the description of the how the turbojet came to be at the beginning is pretty grossly incorrect. It is sort of like how in grade school they say that planes fly due to the Bernoulli's principle. If you are interested to learn about how jet engines actually work and the technical details that go into them on youtube, I highly recommend AgentJayZ [1]

If you want to see a youtuber make an actually good turbojet, check out these channels:

-Игорь Негода [2] His videos are in russian, but are by far the most technically advanced and performant. I watch them with the auto generated/translated subtitles

-Tech Ingredients [3] This is a traditional turbocharger based design, but is presented in a wonderful way packed full of interesting tech details

-Colin Furze [4] The turbojet that inspired this video. Much more focused on presentation than tech details, but worth watching for the comedy at least!

[1] https://www.youtube.com/c/AgentJayZ/playlists

[2] https://www.youtube.com/watch?v=I7GFAbtsQKs&list=PLyyfwUFI3X...

[3] https://www.youtube.com/watch?v=JzwfzgfJiJ4

[4] https://www.youtube.com/watch?v=Gh34A0b8MrE

osamagirl69··on YouTuber Builds Working 3D-Printed Turbojet Engine and Tests It in His Attic
He tried that, then gave up and switched to a traditional casting process.
osamagirl69··on From Idea to Printed Circuit Board in One Week
The web interface of the chinese fab houses directly is way better than what these guys offer.

For example JLPCB https://cart.jlcpcb.com/quote?fromDemo=yes You first order is $10 including parts and assembly for 5 boards with 4 day turn (1 for pcb fab, 3 for assembly). Typically the boards I have done (comparable to complexity to an arduino) are about $20 for 5 copies including fab and assembly. They also have a free cad tool called easyEDA https://easyeda.com/ but I would really recommend kicad. It takes like 5 clicks to go from layout in kicad to boards at jlpcb https://support.jlcpcb.com/article/44-how-to-export-kicad-pc...

PCBway has a lot more capability, but is a bit more expensive https://www.pcbway.com/orderonline.aspx

← PreviousPage 3 of 8Next →