HNHacker News
TopNewBestAskShowJobs

osamagirl69

1,281 karma · joined March 4, 2018

submissionscomments
osamagirl69··on Los Angeles hid power plant methane leak for a year
I have seen it happen several times where it was considered illegal to use waste methane (for example, to run a generator) because the operator was unable to get a permit to do so.

The reasoning is that small scale power generation produces other pollutants (NOx, etc) that are even more tightly regulated than the methane.

This plant still should have been able to secure a permit to flare the methane (thus converting it to CO2 + soot) which would at least be better for global warming than releasing the methane directly

osamagirl69··on FreeCAD: A free and open source multiplatform 3D parametric modeler
I have never tried to build it, but I imagine it is still a nightmare to compile. Where I am in life these days I leave that to the package maintainers.

Solidworks is terrible and chock full of antipatterns. I haven't used autodesk in a good long while--my last memory with it was pretty bad. I was on a team that won a design contest from Autodesk--the prize for which was a laptop pre-loaded with the autodesk suite. The kicker was their software crashed regularly on that machine even under light use...

osamagirl69··on FreeCAD: A free and open source multiplatform 3D parametric modeler
Frecad has come a LONG way since I started using it in 2016, and I encourage those who had a hard time with it a few years back to give it another try. Also - make sure you are getting a recent version, some distros have a tendency to ship a horendously outdated version. The current stable version is 18.4, there should be 19.0 release soon with a ton of improvements, but it is not quite there yet.
osamagirl69··on Home Server Room Power Upgrade and Multi-Room UPS
Its definitely not up to code, but that is not really a problem unless you plan to do a larger (permitted) project in the future or when you sell the house and are getting it inspected. The one thing to watch out for is that if your house does burn down (presumably due to reasons not related specifically to the non-code-compliant wiring) the insurance company will try likely try to deny your claim.

At least in my jurisdiction (America) the only way to achieve what you are trying to achieve is by installing a dedicated subpanel fed by the UPS with appropriate breakers. I believe that such an installation would only be code compliant with a UPS that was designed for such an application (with a hard wired output connection, and appropriately designed disconnects), but a lenient inspector might let you get away with feeding a subpanel from an extension cord as long as as of the breakers and capacity factors work out correctly and the grounding meets code.

The biggest issue I see is that the system is not labeled correctly (at all?). That is a pretty serious issue because if, for example, an emergency worker were to come into the house under the expectation that the power to the house was cut (at the service disconnect) but the house would have live outlets that are otherwise unmarked. See https://www.mikeholt.com/download.php?file=PDF/11_Generators... for more information (the relevant section for your system starts at page 16)

As other commenters have pointed out, just because you can buy something that says NEC approved on the sticker does not mean that it is approved for your application. A good example mentioned elsewhere is using a 16awg SJTW extension cord to power a 15a load--all of the connectors will plug together but the combined solution is obviously not code compliant and even if it doesn't melt/catch fire it will not supply the load with clean power.

osamagirl69··on Reverse-engineering the first FPGA chip, the XC2064
Amazing article as always! Thanks!
osamagirl69··on K-9 Mail removed from Google Play Store due to listing description
Thanks for giving us K-9, I use it daily (hourly really) and absolutely love it!
osamagirl69··on Solar panels are starting to die, leaving behind toxic trash
Solar cells themselves do loose efficiency very slowly (less than 1% per year for most modern monocrystaline silicon cells) due to defects collecting in the semiconductor material. It is the same reason that LEDs slowly loose power over time. Due to the extreme conditions in the semiconductor material (high electric fields, often moderate to high temperatures) the dopants can diffuse into places they do not belong, or cluster together both of which hurt the performance.

That said, most panels die before the cells themselves go bad due to mechanical failure of the cells (cracking, etc) or failures in the electrical wiring in the panel due to corrosion.

It is the same problem as with LED lighting. I have not seen a single LED bulb which lasted long enough for the actual semiconductor devices to age noticeably, but I have seen dozens of bulbs where thermal cycling caused the electrical contacts to the chip fail or the power supply capacitors have gone bad.

Also, due to the rapidly increasing efficiency and decreasing costs of solar cells, it can often be economically viable to replace your array with fresh cells just for the added power output you get. If you took cells form 20 years ago and replace them with current cells you can quadruple your output power for the same area!

osamagirl69··on Solar panels are starting to die, leaving behind toxic trash
The cost of solar has come down _a lot_ in the last few years. At this point the cost of a solar installation is dominated by the cost of the humans who have to deal wit the city to get permits and physically install the components on the roof. For a 6kw system (typical for a single family house in California) the cost of the panels is about $3000, the inverter is about $2000, the auxiliary components (racks, wiring, disconnect, etc) is about $1000. If you are doing it on new construction the install is basically free, but as a retrofit hiring a contractor that will work with the city to get the permits and install the panels is about another $1,000-$10,000 depending on who you talk to and how complicated the installation is (some people need a new electrical service for their house, which runs almost $5k in itself, etc)

That system should produce about 10,000 kw*hr of energy over the year, so the payback excluding installation would be under 5 years.

osamagirl69··on Build Your Own FPGA (2012)
I love the idea of this! It reminds me of the megaprocessor project[1] but much more accessible in its scale, and way easier to understand.

The writeup is very clear, and the boards themselves are very easy to follow in operation. The more I think about it, the more I feel the need for a wall sized array of them acting as a clock. Maybe with a flipdot display for the time? The main issue I see is that the busses are pretty narrow and the there isn't a dedicated crossbar for the routing so the placement is going to be really challenging and probably involve a lot of 'inactive' modules that are just acting as a passthrough for the wiring.

[1]http://megaprocessor.com/

osamagirl69··on Black silicon photodetector breaks the 100% efficiency limit
It is probably not very useful for lidar, because the effect only works for UV wavelengths. At the normal eye-safe infrared wavelengths used for lidar the quantum efficiency of this type of detector is basically 0.

It does work well for general low light imaging and nightvision applications, you can get a black silicon sensor quite high QE (~80%-ish depending on what wavelength ranges you are interested in) commercially from https://www.sionyx.com/

osamagirl69··on Spectrum Analyzer Software for OpenRAMAN
This is great!

I have been searching for a decent piece of spectroscopy software, currently I use a mix of an ancient VB program I wrote in high school, an even worse labview program I wrote in undergrad, and a jupyter notebook I wrote in grad school.

The reliance on the point grey libraries is a bit of a bummer since my cameras are mostly based on firewire cameras using the dcam protocol via libdc1394.

Kind of an odd choice to license it with the cern open hardware license, being that this is really a piece of traditional software as opposed to a hardware design or firmware.

Speaking of, there is a great laser beam profiler called Bullseye that is in a similar spirit to this project. https://github.com/jordens/bullseye

It also supports point grey cameras, so if you have a camera for the openraman project your camera is probably compatible with bulleye as well.

osamagirl69··on How to pay your rent with your open source project
I am more on the hardware side where the economics are different. When I was younger I was largely motivated by trying to commercialize my projects (not just releasing the full design files under permissive license, but trying to use noncommercial license and selling kits or whatever) but as I got older the meger income I might make selling hobby kits on ebay is no longer an attraction and I am solidly in the camp of 'give it away for free, and if someone wants to commercialize it all the power to them'.
osamagirl69··on Inside the 8086 processor, tiny charge pumps create a negative voltage
Very cool -- I always wondered how they integrated those caps into the package
osamagirl69··on Inside the 8086 processor, tiny charge pumps create a negative voltage
Most all modern rs232 ports use a similar approach to generate the negative voltages needed as well. The ubiquitous max232 and its copies/clones all use charge pumps to convert a +5v rail to +/-12v rails for the line drivers.
osamagirl69··on Build a toy quantum computer at home
It is a very nice article, and very well articulated.

However, this article falls into a pet peeve of mine which is that the behavior exhibited here can also be completely explained classically -- this is also a standard demo when explaining how polarization works classically. I feel that it is worth it to at least include a footnote to that effect. The reason that I bring it up is that I (as someone who first learned classical optics, but is now learning quantum optics) personally suffered from some deep rooted misunderstandings about quantum mechanics due to having seen so many of these simplified demos which do not actually capture the quantum nature of light.

The way this article is presented it implies that one can also model quantum phenomenon using maxwells equations -- which is obviously not true. In this specific case you get the same answer, but as soon as you start looking at the individual photon statistics your answers will start to diverge. This is where the actually quantum things like Bells inequality and the Hong–Ou–Mandel effect come into play. If people had just been up front with their descriptions 'oh by the way, when you look at the aggregate behavior of photons they look perfectly classical, it is only when you look at the statistics do they behave any different' it would have saved me a lot of soul searching and misguided contempt for the quantum community.

osamagirl69··on Minecraft@Home
Efficiency of heat pumps are roughly the same for heating and cooling (the only difference is which side you measure from -- the hot side gets the electrical power input counted in its power). The reason EER is so high is that they used absurd units for the heat flow (BTU/h = 0.3W) so you need to divide EER by 3.4 to get the actual efficiency in unit per unit.
osamagirl69··on Pine64 announce the Pinecil, TS100 compatible RISC-V soldering iron
They do not need a sensor--that is the magic of it! It is a fundamental property of the induction heating process that a magnetic field reduces the operating temperature of the tip.
osamagirl69··on Pine64 announce the Pinecil, TS100 compatible RISC-V soldering iron
>We've all accidentally left the soldering iron on, sometime in our decades. The sensors in the iron lets it shut off and not burn your house down.

Specifically for the Metacal irons, all of the ones I have used have a magnet in the stand that causes the tip to idle at a reduced temperature using some sort of feromagnetic magic. The great thing about those irons is they have such fast thermal control that it heats up in the time it takes you to lift the iron from its stand to your work. They also have a deep sleep they go into if they detect the tip is idle for more than a few minutes which can be disabled in a production environment. And for some absurd reason, it is all implemented in hardware...

osamagirl69··on NewPipe – ad-free, open-source Android YouTube client
I absolutely love newpipe, and use it exclusively over the youtube app on android.

On a similar note - I also have found invidious [1] to be so much better than the normal youtube web frontend, and use it almost exclusively for my desktop youtube usage. It might be an unfair comparison because I am not a google user and the youtube website is terrible for non-logged-in users, but for us it is an absolute godsend. I am not sure how it works as far as views and add revenue and all that, and certainly the ability to thumbs-up and comment is disabled unless you click through to the youube link and log in, but I generally try to support the channels I follow through other means so I do not feel too bad about it.

[1]https://github.com/iv-org/invidious

osamagirl69··on DDR5 Memory Specification Released
Like I said, ram power consumption does not scale linearly with capacity due to the significant overhead from the IO. A single 128GB stick will draw much less than 16x16gb sticks (not sure why you are using 256GB on a 4114, it has 6 memory channels so surely you have 288GB?)

Here is the datasheet for a 128GB dimm from 2017 [1], which shows 3.4A IDD0 (normal operation) on the 1.2V rail at the highest speed of DDR4-2666, and 0.2A on the 2.5V precharge rail for a total of just over 6W. Also worth noting is that is a LRDIMM, which draws more power from the DC rails due to the additional buffering. A normal RDIMM draws a bit less static power.

Compare to a manual for a similar vintage 32GB stick [2], which consumes 2A on the 1.2V rail and 0.1A on the precharge rail for a total of a bit under 3w. One quarter the capacity, but still half of the power draw.

[1] https://www.samsung.com/semiconductor/global.semi/file/resou... [2]https://static6.arrow.com/aropdfconversion/d3b3ce1d78b0ad7d3...

osamagirl69··on DDR5 Memory Specification Released
For what its worth, a significant fraction of that is in the communication interfaces, and not from the ram itself, and there have already been significant process improvements to reduce ram power consumption. A modern 256GB RDIMM draws a heck of a lot less then 50w--I have never measured but based on the thermal solution I would say closer to 5w
osamagirl69··on Reverse engineering a camera protocol for fun and profit
For me it was that I stopped reading the news, and generally 'consuming' the media. Not only did it clear out several hours in the day, but it also generally allowed me to focus on being productive instead of being outraged or saddened by whatever was being peddled that day.
osamagirl69··on Pinephone – “Community Edition: PostmarketOS” Linux smartphone
Lasts about a day, but there are further software fixes on the way to enable lower power states. Really excited to get usb host working, pecking away at the touchscreen (with no haptic feedback yet!) was getting very old very quick.
osamagirl69··on Pinephone – “Community Edition: PostmarketOS” Linux smartphone
I have the ubports version of the pine64 and it is still pretty rough around the edges but the phone itself is very solid. It was recently announced that there was an issue with the usb-c port preventing it from being able to correctly negotiate with devices, but they have already worked out a fix [1] which I have carried out on my device and can confirm that usb is now working. Furthermore they are working with makerspaces to help people find someone who can do the soldering if they are not able.

Coincidentally, they also announced a soldering iron called the 'Pinecil'[2] which is based on the venerable TS100 but with a risc-v microprocessor running freertos for $25.

[1] https://wiki.pine64.org/index.php?title=PinePhone_v1.1_-_Bra...

[2] https://www.pine64.org/2020/07/15/july-updatepmos-ce-pre-ord...

osamagirl69··on The Floppy Disk of Floating Point
I actually ran into this problem in grad school. I was trying to simulate an optical phased array with a target at the moon, it turns out that a single bit of a double is about 1 wavelength of light at the distance of the moon. I ended up doing most of the calculations symbolically and only using floats for the differences in the distances between each beam which was enough to get out of the solar system but not out of the galaxy...
osamagirl69··on Tesla may call warranty repairs goodwill due to lemon laundering
My main complaint with their service model is that it is basically impossible to do service on your own car. I have never taken one of my vehicles to a dealer, or a third party service shop, aside from getting tires mounted and smog checks done. This is made possible because I only buy cars which have parts and service documentation available, but as time goes on it is harder and harder to get this information. Tesla is actively working to make this impossible, and this in combination with the required always on telemetry is why I ended up purchasing a Fiat instead of Tesla--despite it being a quantitatively and subjectively worse car.
osamagirl69··on A long-lost perfume got a second life after 150 years underwater
The GC/MC trace is an immutable record of the exact molecular composition (up to the capabilities of the GC/MS, some compounds may fall outside of its analysis range, but the Agilent 5975C shown in the images paired with the matching 7980A can measure pretty much anything you can smell), the trouble that these perfumers have is that you can no longer easily source the chemical compounds.

Furthermore, from what I understand, only a few microliters were removed from the bottle and it was resealed, so it is not like the sample is lost to time, and it is probably better preserved now that it is being stored in a museum than sitting on the seafloor.

I will be honest I am not thrilled that the contents are being kept a secret and used to sell overpriced perfume, but in general I am all for people reproducing relics if it means more people can be experience them!

osamagirl69··on Tesla may call warranty repairs goodwill due to lemon laundering
Given all of Tesla's shady business practices, this doesn't surprise me in the slightest.

Tesla has really made huge progress in modernizing cars (making them electric and not terrible, getting rid of middlemen, continuous/rolling product updates, infotainment that is not slow/terrible, etc) I just really wish they would have focused on the positive parts of the future and left the negatives behind (remote lockout of features, vendor lockin for service, and generally trying to screw your customers at every possible turn...)

osamagirl69··on Tell HN: 6.3% of HN top submissions in plain HTTP, more than half upgradable
My website is http only, and I have no intention of adding https. The content is pure html/css with 100% locally hosted binray content, and adding encryption gains very little for either me or my visitors, and allows it to be viewed by anyone regardless of what browser they are using, or even if they aren't using a browser and just telnet straight in.

It is also not reliant on having permission from a 3rd party to exist, and is fully self contained. Furthermore, because it is self hosted there are several physical machines at different locations which serve as backups and are selected by updating the DNS records, which I believe is incompatible with a basic lets encrypt system.

I understand the drive to push out https for interactive sites, because it is genuinely a bad idea to require users to submit their login credentials over plaintext, and it is possible there are other snooping risks and whatnot, but I really do not see the need for https on many of the simple static sites like mine that make it to hn. The only compelling argument I have seen to force encryption onto everyone is because of ISPs attacking users, but I am solidly in the camp that if you believe your ISP is attacking you you need to use a VPN for all of your traffic, because injecting ads is the least of your worries at that point.

osamagirl69··on When India kicked out Coca-Cola, local sodas thrived (2019)
Even in places where concentrate is delivered, they add the sweetener (HFCS, sugar, fruit juice, etc depending on location and product) at the bottling plant.

Coke is about 10% by volume sugar, and the pre-mixed syrup with sweetener (like used in soda fountains) is usually prepared for a 5:1 dilution ratio in a soda fountain. The concentrate that goes to the bottling plants is basically straight phosphoric acid and caffeine with some secret 'natural flavors' that is usually diluted at more than 1:100 ratio with the sweetener.

← PreviousPage 5 of 8Next →