2 karma · joined June 14, 2025
- For soldering stations I think used Hakko's are very worth considering. The recommended KSGER unit is known to have design issues on older iterations such as ground issues. It can be a bit of a mixed bag whereas the high end Hakkos are a very safe bet so if you can find one at a good price I would recommend that over a KSGER-like.
- Fume extractors might be a waste of money from what I hear. I know people who do a ton of soldering that don't use them at all and I took part in a soldering course about a year ago where they said that there are a lot of regulations on what can go into the solder and the flux core so they are pretty harmless under normal circumstances. I use a kitchen fan when cooking on the stove to avoid breathing all the VOCs that get suspended in the air but when I solder I just avoid inhaling when the evaporated flux plume comes.
Also, the Wi-Fi module for Ebeco floor heating thermostats is a custom PCB with a SMD mounted ESP32 board. They never show that side of the PCB in the photos online but I have one and that's what it is.[1]
[0]: https://www.garo.se/sv/proffs/produkter/e-mobility/tillbehor...
[1]: https://www.ebeco.com/products/accessories/eb-connect-wifi